Inside The $3 Million Tecnam P2012 STOL

Civil Aircrafts
5 followers
Nov 13, 2024 #TecnamP2012
This is the Tecnam P-2012 STOL. Short takeoff and landing and piston twin are not phrases
that usually go together unless you are talking about the P-2012 STOL produced by Tecnam Aircraft.
The Italian manufacturer presented the new aircraft during a press conference
at the NBAA's Business Aviation Convention and Exhibition in Orlando in the first half of October
22 and according to Tecnam the new P-2012 was created as a rugged and durable high wing
fixed gear design with the mission of getting into and out of some of the most demanding commercial
airports in the world. Today we're going inside the Tecnam P-2012 STOL to talk about everything
you need to know about this exciting aircraft. Inside passenger comfort has not been skipped on
as the interior is enhanced by central aisle and configured for nine seats with a window for each
person with bench or double seats. Each space has a USB port, cabin air conditioning, in-seat cabin
hot and fresh air outlets, dedicated reading light, seat pockets and cup holders. The aircraft has a
spacious in-cabin luggage compartment, additional noise luggage compartment and under seat storage
space. The interior's design and superb view provided by the high wing configuration provide a
best-in-class experience for the flights to typical exotic STOL destinations. From a comfort perspective
the P-2012 STOL offers a plus 34% wider cabin, plus 24% larger seat pitch, plus 188% higher
luggage weight allowance and 303% better luggage volume when compared to the most known British
STOL aircraft and does it all in accordance with the latest certification standards. The P-2012 STOL
is the only twin piston with short takeoff landing capabilities compliant to the latest
certification amendments and offers maximum gross weight of 8,113 pounds or 3,680 kilograms
while guaranteeing a modern design, wide and comfortable cabin and a total of 11 seats,
two for pilots and nine for passengers. According to the company, the cockpit is designed to
facilitate single pilot operations as it is equipped with state-of-the-art Garmin G1000
NXI avionics system and a GFC 700 autopilot specifically tuned for the STOL mission.
The flight deck features Bluetooth, flight stream, iridium as well as weather radar,
storm scope, inset map and synthetic vision to help reduce workload and fatigue while increasing
mission effectiveness. The P-2012 is certified for single pilot VFR and IFR for commercial
operations. No type rating is required. From the performance perspective the P-2012 STOL
was developed by TECNAM research and development team to be flexible in multiple applications.
In addition to passenger transport, the aircraft can be used for cargo,
air ambulance and special missions and just as easily converted back to passenger operations.
It features two six-cylinder turbocharged engines and can easily and more comfortably carry an
equivalent payload of the most known British STOL aircraft while matching its takeoff and landing
performances. Moreover, the P-2012 STOL can also outperform its useful load by 20 percent
up to a remarkable value of 2,830 pounds or 1,284 kilograms while performing a STOL mission.
Looking at the new and old P-2012 side by side they appear to be the same but there are some
critical distinctions between the two. The latest model, the P-2012 STOL, has twin 375 horsepower
Continental GTSIO-520-S engines. The P-2012 traveler has full authority digital engine control
and uses 375 horsepower Lycoming TEO-540-C1A engines controlled by a single power lever.
The STOL version's continental engines lack FADEC and have traditional throttle,
propeller and mixture levels and three blade MT composite propellers. It also has a wingspan that
is 54.5 feet or 16.6 meters which is 8.5 feet or 2.6 meters longer than the original P-2012 travelers.
At the maximum takeoff weight of 8,113 pounds or 3,680 kilograms the takeoff run for the new
P-2012 takes only 900 feet or 275 meters and to clear the obstacle the takeoff distance
is achieved in just 1,395 feet or 425 meters. Even better at the maximum landing weight of 8,000 pounds
or 3,630 kilograms where the landing distance from the obstacle takes only 1,180 feet
or 360 meters and the ground run requires just 510 feet or 155 meters.
Talking about performance in detail, the P-2012 STOL is powered by two 375 horsepower
continental GTSIO-520-S engines and a three blade propeller. This combination is able to
push the aircraft to a maximum cruising altitude of 19,500 feet or 5,945 meters
with a maximum rate of climb of 1,400 feet or 427 meters per minute. The aircraft has a cruise
speed of 185 knots at 10,000 feet or 3,050 meters a range of 905 nautical miles or 1,675 kilometers
and a useful load of 2,831 pounds or 1,284 kilograms compared to the original traveler's
maximum cruise speed of 194 knots 950 nautical mile range and a 3,117 pound useful load.
The base purchase price for the new Tecnam P-2012 STOL is 2.75 million before options.
Following the successful completion of the preliminary flight test campaign in early 2022,
the aircraft has entered its final configuration moving on to the certification phase in 2023.
Francisco Sefera, P-2012 sales and business development manager, remarks that Tecnam took
up the challenge of providing a modern, safe and efficient solution to one of the most demanding
aircraft commercial missions, the STOL mission. Developing and testing this aircraft provided
the opportunity to outperform current aging aircraft while facing nowadays more restrictive
safety regulations. The P-2012 STOL delivers best-in-class takeoff and landing capabilities
while contemporarily offering the latest ergonomic design and passenger comfort,
elevating the passengers experience in the STOL mission to the ultimate aviation standards.
Moreover, Giovanni Pascal, Tecnam's managing director, says for decades STOL's aircraft market
has been left undeveloped and unsupported, leaving operators with very little options
for supporting and expanding their operations. Tecnam's response to meeting the needs of these
businesses is a modern aircraft that addresses current needs with an innovative solution.
Manufacturing the STOL of the 21st century grants accessibility to the world's most remote
and challenging commercial airports, increasing the regional connectivity while exceeding
customers' expectations. Thank you for staying with us till the end. Here are two videos you
can watch next. If you enjoyed this video, please make sure to leave a like and subscribe.
Thanks for watching.
