Laço Formoso Natal - Rápido Fácil e Econômico

Tathy Lima
2 followers
wonderful, how are you, look at
our charming beauty with these
beautiful ends that I make here with you
in the Christmas version, both in plain ribbons
and in printed ribbons, look how
luxurious. So you will learn how to make
this bow exactly as it is
shown here for you with this base and
this perfect tip and what do you
think, leave a like here on the video, tell us
here in the comments What did you think of
our bow today, the first version
Christmas Don't forget to subscribe to
our channel, leave a Bell activated so
you can be notified when I post
the news, you can see that this same
tape that comes here comes here and
this part is mounted like this
up here and you can work on it.
Any tape or theme is fine, may God
continue to bless your life, your
home, your family and all the work of
your hands come with me let's go to the
measurements I have four times it's the number tape
on I have 31
cm Quite here then I'll give
you girls the
measurement of the ends is to Let's leave
it like this, let me put it like this, ok,
PR, let's make it really cute, and then
you can see that I made it with a plain pattern.
Now we're going to work on it all
smooth.
it's better to see
you Med, join the ends
here, you don't need to knead it here, you're
going to 5 cm, ok Here,
on the other side, the same thing,
it needs to be open like this, okay,
people, it's not supposed to hold one tape to the
other,
not one end to another one just for us to
mark the 5 cm, then I'm going to do this
one and we'll come back ready, I
marked it. I'm going to leave the white on top
because I want the red to stand out more,
so the color you want to
stand out the most, you put it down, okay? well,
one you take PR to the right and the other to the
left, okay, I'm going to reserve this one
here and we're going to work with this one
here, we have this one that we turned
to the right here we're going to join the
markings, you see pin with pin so
we can go down the tape that comes on top, you
can see we're going to go down this one here
that's at the bottom, right here in the marking,
here's the v You go down to the tip, it
comes here, logically, this tip
here, it already comes halfway along the
bottom tape now. is to fold the top one also
forming our little point here let me
get one a duckbill I'm going to take out these
pins here and we'll fasten it now just
bring it in. You can come with your
left hand and now you can come. I gave it
a little pull. because here it will have to
be open, see if you
adjust it here, I like it more
closed, then you throw it here towards
Ponta Then it will be more closed,
ok, then all you have to do is tidy it up
here and it will stay more closed, you can see
this part here, it goes here, you
see, I have more red, there is this
top part, this one and this one here, look
how it looks now, this other one here, right,
the top part is on the
left side, we put the pins together we're
going to go down the one that was underneath, right,
holding it here, you organize this
end, it comes here in the middle of this
tape, you organize it here, you can
see that it
fits pin to pin and this
end Come here now, we're going to go down the
other one
So, let me get a duck's beak,
take out these pins here,
my
needles, then you'll come with your
right hand and your left hand, here it's the same
case, just put it together here, just
organize it, leave it right
here, it will look like this in the part from the
back we have this here
Brazil we will do our basting from
top to bottom 1 2
3
four I will take the little red tip
half of the beak you can
see from top to
bottom
five on the other side the same thing the
little tip of the white ribbon and and the tip of
top 6 7 8
9
10 ready I have 10 stitches
here pull it
well and we
cast off I cut the ribbon
people the ribbon not the thread the ribbon so that
's the first part so let's
baste the other one it's the same 10
stitches from top to
bottom
3
4
5
6
7 8 9
10 press it well, pull it
well and it will stay like this I'll put it
together with hot glue
here and then I'll come back with the base measurement Hey
guys, how beautiful it looks, it's not even finished, the base measurement is
44 and two ends are 9 10 cm, you can
cut 10
cm at two
ends, I'll hold it with my right hand, I'll
bring it back and
like this Let's adjust it here, I always tell
you that I leave approximately
two fingers here and I adjust this end
by placing the bow on top, see
for the size I
want, let's find the
middle and then I'll put
the
white and the
red ones past the marking a little bit,
I'll leave them here,
about 1 cm.
here at the
marking
one
2
3 4
5 6 which is a little hard here 7 and
8 eight points cut here a little bit ok
and I'm going to
seal it you have to seal it
here I'm going to
pull it so we can finish it I'm going to cut
the ends with
you I cut the line here guys this
part here I always cut it
like this and now we're going to cut this side
before we're going to assemble the bow and
then I'll be cutting the ends,
okay, normally the front, I'll use this,
whoever wants to use this side, but I
don't think the back side I like
this one, I like this one,
6 cm duckbill, put a
little bit of glue, I'm going to come
back here, I took ribbon number two, I already
glued it here, on my
duckbill, and then I'm going to take a little walk here,
pulling firmly, always adjusting the
bow. I'm going to pull it here, I'm
going to give it a little spin up here if
I want, then I'll go and
apply it, okay,
let's
cut it so we can finish it, I didn't even
seal the tip here, but that's
okay because the finishing tape
here will cover it.
Everything looks perfect now. let's PR the
ends Oh, you're going to position it, I'm even going to
leave it more on the white part, you're going to
position it like this, there are three parts, right?
it's in the middle here, the first one you're going to
cut
like this,
the last one is
also the one in the middle, so you
can see what happens, you can see that the
red one at the bottom is bigger, you can make
it a little
bigger, okay, we're going to
seal it, I sealed it, I'm going to do it
here, I put glue here,
here and here and then I'm going to position
my ends
the way I want because otherwise it
will move out of place, it won't look that
nice, I'll put the glue here so
I can attach the bow here to the
ends ready folks, our bow is
ready, the tip for the ends was this, then
just decorate it however you want, the
execution of the bow is beautiful, the bow was
perfect, kisses, stay with God and see you in the
next video
