Tiara Escolar Fácil Para Iniciantes

Tathy Lima
2 followers
from my heart, how are you Brazil?
I hope so, Lisa ribbon, I made school inspiration, right?
it
looks a little different, you can just
do it around school, not in the video, I
'll do this one with you guys, look how beautiful it is,
I used it just
right, you'll see there are two parts
that we use for the bow and I used a
really cute print, it's like we
just leave it printed here, it doesn't need to
stay here just to give the details.
So watch the video until the end and
you'll get all the
important tips that I bring here for you,
taking care of today's like, don't
forget to subscribe, keep
blessing your life, your home, your
family and all the work of your hands
come with me Brazil, as it has, it has
several sizes but the difference is very
little, it's millimeters, this one is 3, it's
almost 38, there's a little something missing for 38,
so the part you're going to put here, that's
why I'm not going to give measurements, you
're going to measure it on your tiara, okay, because
sometimes the Tiara is bigger and it's one and
sometimes it's smaller, this one is from Yama,
the unbreakable one from Yama Beleza, so
you're going to cut the right size of the
dot here, you're going to do this on
your ribbon And then you're going to cut the ribbon
and the two top parts,
top girl, I'm going to use a printed one and a
plain one just for me to do the test here, I
have it twice with 33 cm right 33
twice then you can use it okay I want all
the Pink then you will do like I did at
school here you see just one color but
I could mix the colors there are two
parts the ones on top ok and that's it Come
on, and the top decoration is also
another detail, girls, there was one that I
covered, there was one that I covered and
this one I didn't cover, I covered it blue with
tape number two here on the inside and
then I glued the other one on top, that's what
I see here there is no need to
cover it, I didn't, there wasn't
any difference and then what are you going to
do, I'm going to use a 1000 grip, okay, there are up to
6,000 that you can also use,
but for that here I'm going, I'm going to
prefer the grip, okay, let's go you need
two pieces of tape number two, so the
first step here, we use hot glue,
we're going to do this little part
here because it's finishing, it's the
finishing, I'm going to cut
it here, you do it here with
hot glue on both ends here, it's just a
matter of finishing train that has already been
finished done This part
will now come here with the handle
1000 what do we need to observe
here this glue here we have to
spread it out well so as not to create volume
whoever wants to use hot glue
girls can do it To glue it, I'm going to put it right
at the tip, you see, and center it right
in the middle of the
ribbon, right at the tip here, then I'll
burn this train
here and then we'll do it
throughout the process, wait for it to dry a little,
here I made one with hot glue Boy, no
but this glue here for people who send
everything by mail, plus it will stay very
firm, for example, if I had covered
the
tiara with the glue, grosgrain ribbon
or the jeans ribbon itself,
I could use hot glue because it
would be ribbon with ribbon right, the
hot glue holds a lot of tape to
tape, so we wouldn't have this
problem, but you can use a little ribbon
here, the grosgrain one, even if it doesn't take
much time, like this one, it's 38 cm, right, the
size of the ribbon is a little bigger there.
We would pass the entire tape up to here,
as it is here,
so let's stay firm
here with this Glue, then
this is done. You can see that
mine had a little leftover here, mine
had a little leftover here, so
we have to cut it to make it even,
Zinho. OK, I'm not going to apply the lighter
now because I added this glue and the
flammable glue, I'm going to wait for it to dry
here a little so we can do another
part of the bow and the tip part, you know,
also the finishing part that we
can't forget, you see how It's
all like this, ready Come on, right here,
where am I going to put the glue, you see,
I pulled
it out of the glue here, ready, just at the tip, there's no
need to apply it. Glue here, it doesn't look
weird, just in this part here,
we'll still have the
finishing tape do
this, it has dried, do the same thing on
this side or put the glue on the ribbon or up here, look at
the ribbon, see the pink
grosgrain ribbon, it's a little bigger, it
has to be very close here
because why are we going to pass the
finishing tape the finishing tape I have
to cover this ribbon here
I have to make it a little
shorter than the Tiara, actually that's the
right thing to do, let it heat up here, you see,
it has to stay like this, just a matter of 1
mm It's a very small difference,
just so we can have a nice finish, okay,
I put it here,
you can finish it with
grosgrain ribbon, I'm going to make mine with
grosgrain because this
ribbon is thick. If I put the
jeans, which is the same one, it will to make it even
thicker, I'm going to use a
blue one because my ribbon will have
Blue Detail now we're going to do that
here, you
see, I'm going to do just one end and the other
I'll do it off or you can do the
finish you think is best,
let me measure
here
cut seri there let me see here if it will work
great to put glue
here and v I'm going to press it well so that the glue
spreads ready for our finish then I
'm going to do it on the other end and we'll
come back now guys I did the finish I
'm using a smoother and a printed one, I
want it to stand out more from Lisa, okay,
let me show you, then Lisa
will be down, what the highlight looks like,
let me show you, let's go here, I don't
have a defined size, guys, I'll
take about 13 cm, here I'll do it
the knot then I'll organize it, right,
you can see that I placed the
pattern upwards. I didn't seal the ends
because we're going to cut it. I held it here and I
'm going to do it like this, that normal little knot, I
passed it, pulled it here, highlighted the pink because
the knot, that little knot here, turned out to be pink, but
my idea is this, I don't want the knot with
the print so I put the plain one
down in case you want this
print to come out here and here you do the
opposite So how do we tie the
knot here girls I just pull it, I don't pull it too much and
let's
organize it, I'll do it here and see
if it's too high, I'll go down a
little bit, just go down a little bit, I
'll leave about three fingers from the tip
to here, you can see three fingers, so I
want you to see that the heart is right
here. it's the other way around, we're going to glue it,
right, so it doesn't look like
part of the print And then I'm just going to
organize the Nozinho here, you pull the knot,
I thought it was so beautiful with the detail of the
printed ribbon, I organized the knot, this part here,
I put glue inside here which is for the
ribbon to stick to the tiara, I put glue on it and
tightened it, you can see here it won't loosen
anything else here guys, you leave the knot as
tall as you want, then
we're going to glue it too, right here,
I'm going to cut it like this, half round and the
from the bottom I'm not going to
cut it together yet, this one girls, we
have to cut it together and seal it before I
seal it, you can sew on pearls,
pendants and appliqués, after you
sew it, you glue it on top to
get that wonderful finish, okay, so what?
What am I going to do here?
I'm going to seal these two joints
together, not separately because I'm going to
see if I'm going to sew something. One
more
pull on it here, an organized one, don't
pull it to make it too small,
here too, guys, I put a thread on the
nose of the gun and glue it, apply
glue and glue it after I sew these
little parts, I'll see, the loom
is practically ready, let me position it here
I glued mine but it didn't look right,
I'm going to glue it all together correctly, what I
want to say is here for you, I'm going to
decorate my tiara, this side here, this
side is already pretty with the ribbon and I'm going to
show you here, so let
me show you The result girls, this
part looks like this I'm not going to glue it if
you want to glue it I like this
effect, one is bigger than the other and
here I sewed these pearls the others
I glued them with hot glue mini appliqués
with the glue t6000 min mini applique not just a
dot of light, let me show
you the result And that's it,
this part is at the bottom and this
embroidered part is at the top. I thought it was very
delicate and then you use what you have at
home, so I sewed and glued it, let me
show you Here you can, I don't know if you can
see the inside, it's sewn, I
only sewed the part, I glued the
bottom part, I'm going to apply the glue
straight here, to glue it, I also
close this side
and that's it, you have a lot of ideas, you can
do it. several inspirations, right, I wanted to
bring not only back to school for
you to see and it was the same step by step
that I did and that's it Brazil I really hope
you like the Dica kiss, stay
with God and see you in the next video
