How to Read HT and LT Electrical Panel Drawing @ElectricalTechnician

Electrical Technician
42 followers
1 Video View·Nov 9, 2024
Hello friends, the electrical technician has an
emergency electrical panel which is
connected to the generator, which means that the
power supply that comes from the generator is
brought and connected to this panel,
then from here the power
supply is distributed to different distributors. As
you will see here, next to me, I have
a SB breaker. Now above this SP breaker
you will see that it is written Incomer
One from 2000 KVA DG Set Number. One,
this means that the generator which is the first
generator, which is when we start that generator, the
power that will be generated through it, the
power that will be produced, that power supply has been
brought and connected with this SB breaker.
Now this which There is a SB breaker, if
we turn it on then what will
happen after turning it on? The power supply will go to the bus bar of this panel.
Now the power supply will go
to where is the power supply going,
as you will see, our whole is so long. If there
is an electrical panel,
we can distribute the power supply to so many feeders through only one generator,
so
here we have to see
how many electrical devices have been connected to this incomer one
and where. If you want to see the power supply
going to the distributor then
you
can see it here practically but if you see it practically then
only you will know the overview from outside
but if you You want to see
where the power supply is coming from, how it is
coming, how the power supply
is going to the distributor,
which protection
device is connected with this SP breaker, this
SB breaker. How to turn on or off
your SB breaker or it
comes by default. Suppose this SB breaker is
not turning on. You
try to turn it on. Press the start button to turn it on.
But it is not turning on, then
why is it not turning on in this condition,
how to start it, if you want to understand all those things, then
for this you will have to open the drawing, you will have to
read the drawing,
so here my income is the power in this income.
If I want to find out where the supply is coming from,
then the first
step is to read the name of our income earner
and the location of this income
means the feeder number.
written on
Income one is from 2000 KVA DG set number
one. Power supply is coming from DG set number one.
After this we have to see here its
location. We have to see the panel number like
you will see that three is written here and
two is written at that place. And if you
look here, it is written 3b 3a 3c, so this is
our income, the location of this income is the
location, here 3c means panel
number. 3c Now this is the panel number,
we have to see this panel number in the drawing
as you will see here in
our drawing, a
single line diagram has been made here in this drawing, the power
supply is coming from here which is our Bus
bar section one is done, section one of the bus bar is
complete and with this bus bar
you will see here
which panel was our panel number th c so panel
number you will see which one is here 3b 3c
3d It is shown in this panel that the
power supply of our incomer one is coming
from DG set number one. Now a
3200 ampere SV breaker has been
installed with this incomer. Which SV breaker is it, then you
will see the symbol here.
Now this SV breaker has been made, on turning it on, the
power supply distributor goes to this bus bar
and before this SV
breaker, you will see so much. All the
protection devices are installed, which means that this
protection
device is installed before it,
not after, when you switch it on, then the power supply
going to the bus bar has not been
connected before that. This means that
as soon as we start the generator,
after starting it,
power supply will come to all the relays so that they
can monitor the power supply, as you will
see here, there is an over current relay installed
in our panel. more current
Flows means that
too much current is allowed to flow through this breaker, so
to trip it in this condition, it has been
installed below it, earth
fold relay, below this,
differential relay, different types of relays have been
installed below it. Now all these are relays, what is the
work of these relays, what is their function,
you have to understand all these things. Now
if you want to see
from where this relay is getting power supply and where it is connected, then you will have to understand.
Here At
present, I am telling you a single
line diagram, as you
will see, here Pem Kam relay has been installed,
here Pem Kam is written, it means
that this is our relay and not of this relay.
Complete details are given here and you will
see that our power supply is being generated from here, the
generator is built here, the
power supply is going forward from the generator and
along with this power supply, the Com relay has been
connected, which means that a the whistle has been blown
Feedback is coming from the whistle. It
means that the relay is our over current relay. The
power supply to this relay is coming from the power supply generator. A
whistle has been installed along with it and through it a signal is being
given to it that Whether there is over current or
how much current is flowing,
after this the power will be supplied
to our SV bracket, then after turning it on, the
power supply will be supplied to this bus bar.
Now after this you will see. Another
bus bar has been made here, as you
will see in the next page, there is a bus bar here, this is
our section two. If you look in this, this
is our section one, section one, section two, let
me explain, see such a big
electrical panel. We connect all these electrical
panels through only one SV breaker. We are
power supply distributors to
different incomers,
like incomer one, which
is this If you turn on incomer one, then this much
power supply will go to this much area,
all the panels there are here, all the
feeders there are, the power supply to all will
go through this incomer. Now after this you will
see that here we have a bus
coupler. Before I will tell you about it,
here we come to Incomer 2, which is Incomer 2.
If we turn it on, then on this
side of it, which is the bus bar, it means that
all the feeders are installed on this side. Be it this one,
be it this one, be it this one,
power will be supplied to all the feeders installed.
Now if you want here,
connect the bus bar of the first section and the bus bar of the second section together. To do this means that if you
want to supply power to both of them by turning on only one incomer, then
for this you have to turn on the bus coupler. So what is the bus coupler?
You
can see the diagrams of this bus coupler here, our diagram is here. bus
coupler Indicator light has been installed along with the bus coupler.
OC & SC relay has been
installed here, which means that over current and show circuit
relay has been installed. This is our ACB breaker. In
this way you can see the details in the single line
diagram.
Here I told you the basic overview,
how the power supply is coming, how the power
supply is going out. Now friends,
if you have understood the power supply, then after this
you have to see the control supply,
like you learn to read the drawing here. If you
want to do this, first of all you will have to
see which relay is installed on the top of the panel,
as you will see, this
relay was installed which I just
told you, now
from where is this relay getting the power supply? The current which is
our relay, if this relay trips on over current,
then we have to see from where the signal of over current is
coming, after this you have to
see where the power supply is being given to operate this relay.
After this you have to see this When
this relay is operated,
how is the
signal being given to the indicator light
or is it tripping the SB breaker? This is a relay,
how through this relay, the
alarm is being generated in the announcement panel here,
so every
detail that happens, you have to see it in the drawing,
if you want to learn to read the drawing.
you near the panel Stand there,
look at that device, after seeing it,
read it in the drawing here, how will you read
all this process, which is one of my
courses, how to read electrical panel
drawing, I have explained it in complete detail in that course,
I am a
youtube4 There are all electrical panels
like ACB breaker, the biggest problem is in
ACB breaker, BCB
breaker, there is a problem in all of them. If
you are told that this breaker is a fault, then there is a
fault in this breaker. If you trouble
shoot it then you won't be able to do it
because you don't know how to read drawings yet.
If you know how to read drawings then
you can easily do trouble shooting on it
even if you have never worked on SB breaker.
If an electrical fault
occurs, I am not talking about a mechanical fault.
If an electrical fault occurs, then to
sort out the electrical fault, it
means that to solve it, you will
have to read the drawing and if you do
not have to read the drawing. If it comes to this then you will
not be able to solve this problem at all.
I am
giving the example of ACB breaker here at the present time,
but in my course,
you will get the
complete diagram of BCB breaker explained.
How to turn it on, how to turn it off, how to
trip, how the signal is going through it,
every concept that is there,
I have explained it completely through one of my courses, the
name of that course is How To. Read
Electrical Panel Drawing:
If you join this course then I
can say with guarantee that you will not have such a thick
drawing, even if you have a heavy
drawing then
you can read it easily.
You can trouble shoot the fault in that panel.
If
you want to join my course, then for this
you will have to download the Electrical Technician app and
classes are conducted inside that app only. Joining those classes
To join,
you will have to pay only ₹ 1. For ₹ 1, you will get the
complete SB breaker, BC breaker, LT panel,
ST panel, this is our LT panel, the
drawing of LT panel, how to read
it, now I have told
you completely. Outside, I am telling you about the
relay installed inside it, how the relay is working,
what is its function, I have explained everything there,
apart from this,
how will you read the drawing of the ST panel, the
BCB breaker installed inside it.
How does it work? How do we
turn it on? How do we turn it off?
What is the function of the TNC switch installed here? What is the function of this
relay? What is the function of this relay? Trip
supervision relay. Function of supervision relay. What happens,
how is the power supply being supplied, if it
trips, what
work will be done when it trips, i.e. from which circuit the
power will be supplied, which circuit's power
supply will be broken, I have explained every concept
there. I I have
not only taught you to read the drawing, I have
also taught you trouble shooting there.
If there is a fault in your electrical panel, then
how will you trouble shoot it? By
looking at the drawing, I have
explained everything in my course, so if you
really want to If you want to have such knowledge that
you can read any drawing and
do trouble shooting, then you
can join my course, you will
get such good knowledge in just ₹ 1, which you can get at
any time while staying in the company. You will not be able to learn.
If you want to join the course, then
I have given the link in the description.
Apart from this, you will also get the link
to download my app Electrical Technician App
in the description.
Apart from this, if you have any question in your mind.
Or if
you have any kind of doubt while watching the classes then to
solve the doubt you can call me on my
whatsapp.app number which is written 8989
0466.
Whatever doubt or query you have, you can get
it solved by contacting me. I will
meet you. Thank you
very much for watching this video in the course of electrical drawing.
