Film Craft 105: The Cinematographer - 7. Exposure Lenses

Studio Solution
24 followers
#Education #filmmaker #teachnic filmmaker
The other way to control the exposure of your image
is by limiting how much light is allowed to enter the lens.
This is done by adjusting a setting called the iris
or the aperture.
And aperture settings are measured using a term
called f-stops or sometimes t-stops.
And just to keep you on your toes,
f-stops are a whole other set of numbers
for you to keep track of.
And best of all, they're inverted and logarithmic.
So this means an f-stop of 22 means
the iris is close to a pinhole,
only letting in a tiny bit of light.
f-16 lets in twice as much light,
f-11 a little bit more, f-8, f-5.6, f-4, f-2.8.
And if the camera's set to f-2,
the aperture is wide open and the lens
is letting in as much light as possible.
Although some lenses can go even wider to 1.4
and others are limited to like f-4 or 5.6.
So they don't let quite as much light in.
Look, I know this seems like a random series of numbers.
And you'd think that the bigger the number,
the bigger the aperture.
But it doesn't work that way.
Sometimes I swear, I think they made all this stuff
so complicated just to ensure job security for camera crews.
Anyway, it's not really important
that you memorize the numbers.
But it is important that you understand the concept.
You can restrict the amount of light coming into the camera
to control the resulting exposure of your image.
Changing the f-stop won't affect
the graininess of the image either.
So most of the time you set your camera
to a fixed ASA setting and then you adjust
the f-stop as necessary to make sure
that all the shots are properly exposed.
Now if you're in a situation where the light is very bright
and you stop the lens down all the way to f-22
or whatever its minimum f-stop is
and the image is still too bright,
you can add a filter in front of the lens
to further reduce the light.
These filters, we call them ND filters
or neutral density filters,
which is a fancy way of saying they have neutral color.
They're pure gray.
And wait for it, they have their own numbering system too.
An ND3 filter is equivalent to one f-stop.
So if your lens was set to f-8 and you add an ND3,
that would be the same as making your lens set to f-11.
ND6 is equivalent to two f-stops.
ND9 is equivalent to three f-stops.
I know, total madness.
But again, the names and numbers aren't important.
What's important is that you understand
you have options to limit how much light
is coming into your camera lens.
And that way you can make the image properly exposed
no matter the circumstance.
Besides, if you hold up an ND9 to your eye,
you can see that it's a whole lot darker than an ND3.
So it's pretty intuitive that it's gonna make
your picture darker if you slap it on your lens.
Many professional cameras have ND filters
built right into the camera too.
So you can reduce the light without having
to add a piece of glass in front of the lens.
Just flick a switch and voila.
By the way, some of you who may be familiar
with still photography may be wondering
about using shutter speed to affect the exposure.
Since when shooting stills, we typically balance
f-stop and shutter speed to find the optimal settings.
But with video, you can't really adjust your shutter speed.
The cameras can adjust it, but you shouldn't use that
as a way to control the amount of light coming in.
Because see, in video, the shutter speed
should pretty much always be set
to twice that of the frame rate.
So for example, if you're shooting at 24 frames a second,
your shutter speed should be set to 148.
And if you lower the shutter speed significantly below that,
the images are gonna appear smeary and stuttery,
which is a cool special effect,
but not applicable for most normal scenes.
Likewise, if you go higher,
the images become unnaturally sharp,
which again is an interesting special effect.
And we use it sometimes for sports videography,
or it's been used in feature films in battle scenes.
But again, this should be thought of as a special effect
and not as a way to limit the amount of light
coming into the lens.
