Carving a Woodspirit Face (Hand Tools)

Carving Art Channel
11 followers
Hey guys, Doug here again and we're going to do another wood spirit practice carving tutorial
video kind of thing today.
People have been asking me to make a video using the cottonwood bark, black cottonwood
bark that I've been playing with recently and I've put it off for a while and that's
why we call this wood carving practice wood spirits because I still bumble my way through
but I pick up a couple of tips and tricks along the way and yeah, I can share a little
bit.
You might get a tip or two out of it but I am in no means an expert in this field and
before we even get going, if this tweaks your interest at all, I highly, highly, highly
recommend taking a little course from Alec LaCasse.
I'm going to put his link in the description for his fundamentals of wood carving class
school online videos.
It's super good.
But yeah, I've picked, I've hardly scratched the surface but even the little that I've
watched, I've picked up quite a few little tips so I'm going to put that link in the
description but cottonwood bark is fantastic to work with.
I've really been liking it.
I made a little house while ago with it too so yeah, we'll be doing some kind of these
little whimsical houses in the future but today, I just got a little piece of bark up
on my board here and yeah, let's just jump right in on it.
I'm just going to take my old, old chisel here and just start clearing some wood off,
wood off, some bark.
From now on, when I say wood, I mean bark, all right?
That's the dirty, dirty part of it.
Don't get caught up on the chisels that I'm using.
The, if it looks flat, call it flat.
If it's a gouge, we'll call it a gouge because it'll be seven, eight, nine, a scoop is a
scoop in this case and you'll get to work with whatever you got but remember I mentioned
earlier about the, on one of the live streams, we went through the sizes and whatever so
we don't have to get too caught up with this, all right?
So I got a somewhat rounded area here and if I take a marker, I'm going to put a center
line roughly down there, all right?
Okay, so the rule of carving I guess would be if this was the top of the head and this
isn't, this is going to be the hair so we're going to be generous on this rules anyway
but if we took that, let's say this is the, let's call this the chin but this is all going
to be beard after, all right?
So halfway mark, in fact, that's even generous and halfway again, all right?
So basically, I'm going to, I'm going to scooch this up a little bit but this is our, where
our eyes are going to be and this will be the bottom of our nose, all right?
Something like that.
If our head is, if it was a full head, if it was three inches across, that would mean
it should be about four and a half inches, that's pretty well bang on actually, about
four and a half inches down, okay?
So one and a half times the width is the length but we may not fit the whole face fully in
but you get the point, right?
I guess that's, let's go a little bit deeper, let's go with the number eight here, three
quarters of an inch or so and we're just going to make a trough across the bridge of the
eye here, the bridge of the head, all right?
I'm trying not to get my hands in the way but it's almost impossible, all right?
And then we got the bottom of the nose here, let's just get that out of the way, up the
side of the nose, all right?
And roughly, that's our setup, now we're going to deepen everything to a lot but that's
a rough setup but all right, I'm going to go with the number eight here, a little bit
wider, get some more meat out of here and the nose here, end up being a bit of an angle
both ways here, we go pretty long on that, it's just number three, we got a long way
to go with this nose still so just taking a little bit at a time, all right?
Let's go back to that little number eight here and come up again and dig that in again,
want that nice and deep, I'm going to take a little bit out of the side of these two
as we go right off the wood with it, we'll thin up the head after, okay, we're not here
yet, we're going to put a little dot here, both sides, roughly where the eye is going
to be, a little line, okay, but the nose here, I want to bring that nose down, I want to
find the edges of the nose and we need to make a little cut here for these little nose
flares and for that, we'll go with the number seven, we're probably going to go smaller,
it's going straight in, all right, yeah, we need to go a little bit, a little bit more,
a little bit more around but that's the side of the nose flares regardless, I really want
a ball of the nose so either that means I got to whip that nose back up in there, okay,
yeah, I'm going to go a little bit smaller, we'll go with the number nine, I guess, let's
get that straight in, yeah, there's technical words for all these but I don't know what
you call them, nose flares, all right, well, I'm going to take that right up into that
eye, now normally I would go really deep under the nose here to make it stick out but this
is all going to be beard so it doesn't have to quite come out, the nose is not going to
be quite as pronounced because there's going to be a little buffer up here there, like I said,
just working through it, all right, the beauty of this cottonwood bark too, it can be sanded,
really nice too, so we'll get to there, you see something there starting to happen,
starting to come a little bit, just going to just clean this all up before I start
drawing any more lines, it doesn't take much with this bark, see how nice that is,
like we're going to go over this many more times but I just want to just see where I am really,
just kind of cleans out all the marks, you can just stick that, you can fold her up and stick
her in there, I'm going to mark somewhere around here from the nose flare, up in here,
I'm going to put the corner of the eye, obviously the same on both sides, I'm not going to measure
but I am going to take, you're going to see me, I'm going to do a little deeper cut again,
something like a little C here, all right, on both sides, like I said, we're going to,
we're going to mainly focus on one eye that you can see nice and close and I'll do the
other at the same time but off camera, all right, and then a little bit on the outer edge here too,
all right, now I'm just kind of eyeballing this but I should be measuring it, I'm going to have
some trouble over here, the bark, I'm lucky enough to have the bark, see this, I've just got the bark
curls right here on the edge of the eye, so hopefully I can get this eye in without peeling
off that piece, probably can do this side but really I'm just going to make a, with this number,
number eight, I'm just going to dig this in, that, oh my god, like I said, many times already, this
corner of the eye, this is the deepest, deepest area, so I want to make sure I get it nice and
deep and that basically starts, this is your eye, a little bit of a mound here, all right,
same on this side, I guess they call that, this is the tear trough here, you can see already that's the
start of the mound of our eye here, all right, I'll do the other side and come back, all right,
now I'm going to go and I'm going to draw the eye shape on here, all right, and again we're still
working on that, the ball of that eye, all right, this is not the actual eye, it's just a little
slit in the middle here, still working on that ball, so I'm trying to draw this on both sides
evenly, I'm just going to come up, not with that one, I'm just going to come up and around on this,
you see that, no you can't because my hand's in the way,
I'm going to come underneath here too, just come around here, I used to do this, I would have a
really sharp angle on there, but it's really not, it's really really out like that, so
that's how we're going to do it again, now before we get too carried away,
let's put that eye on there, cut that eye in there, all right,
just with my my knife, and you would think I would always horse this, push my knife in hard,
not with bark, you want to come back a few times if you have to,
but just little slices, don't try to take it too deep at once, so lining that eye, all right,
I'm going to carve up to it, I picked a little bit of a corner out of here, you can really see
we want that eyeball round, coming back in each side, deep in the corner, carving up,
hope you can see that, then we're going to carve down,
something like that, it's hard to work with a camera that's right in my ear right now,
okay, got my little brush here, now I got sandpaper, I'll just sand that eye a little
bit in there, you can see, and now I know a lot of the comments are going to be
from expert wood spirit carvers, for some reason you're watching me
practice carving wood spirit, but anyway, you're going to say sandpaper is harder than your tools,
and I say yes, you are correct, but I know how to sharpen my tools, so don't worry about it,
all right, so like I said, it doesn't take much, just a little swipe,
and there's your eyeball without any lashes,
kind of setting in some rough eyebrows, just so that we can get that forehead up, we need some,
do it again, try to do it again, all right, we need some eyebrows here, just a little one,
this is a 15, I'm just going to stay right above that, I'm just going to, I'm not going to go too
crazy here, go down that way, and over here, and right off the edge, all right, all right,
just kind of setting them in right now, starting from the middle, all right, and going over,
middle, and down, all right, we can get those up, some good depth in there after,
and get that little, it's a little shadow in here, this is not the tool to be using,
but all right, have to clean that up, let me cut that just a little bit more,
using the side of that v-tool, a little bit more height on that,
so these eyes, they're mostly hooded, this guy should be at the plastic surgeon,
getting his hoods done here, same thing on the other side, let's get that eye bag
set out a little bit more, this is just number eight, about a quarter inch or so,
I'm just going to get that, get some wrinkles in there,
all right, a few times like that, I'm just going to smooth them out with the sandpaper,
I don't know if the camera picks that up, but just some of them bags that I know I have,
all right, where's my brush, all right, I will try and match that on the other side,
get some of this down here, that's good, of course we have to have crazy hair coming down here,
going up, almost have these sticking out straight, but see how they're kind of rolling into the
the head, there's no sharp, no sharp edges, so we can just kind of start and go up,
a little curl in it, at the same time we're going to turn around and come back down with a little
curl, all right, so I'm just going to have to go all the way to the edge, a couple extra for
good measure, that's basically the camera, just enough, I'm probably going to put paint on this,
so just enough that I can do a little dusting of paint that will catch on there,
okay, back to the beard area, I can see already I got way more cheek on this side than on this side,
so I have to get this down in a little bit deeper, take my knife and get that in there
deeper, and start bumping the camera, of course,
same with this temple area here, that can all be thinned out a bit, you see that,
I'm going to get some, get some temple in there, get that head thinned,
I'm doing that too, now we can actually get a couple,
get a couple little crow's feet in here, this side, all right, still gotta get that thinned
down here, off of here, but I don't want him to be super, super sad guy, so I want to bring his
mustache up, all right, you're not going to get that corner on this side,
but if I did it long and draggy, he'd be like a angrier, he's already not going to be super
happy, but he's not going to be angry, all right, take my knife and stand over top of the camera,
all right, that's a, that's a pretty chunky, too much on the front here,
I have to get that down, let's just start over here, there, nice and deep,
okay, a little bit different now, because we've got this, hair's going this way here,
let's just start a little bit lower here, rough, really rough area here,
of course, we can't, no, no straight area, no straight lines,
every time I put down a tool, I lose it immediately, that's a big detail, I want to get,
so I just want to get past the edge, and give it, create some shadows over the edge,
I'm just going to take my number 11 here, right, wonky little lines here,
my sandpaper, I just think, every time we can do a little bit better, and that's what,
what I call it carving practice, because still picking up little tricks here and there,
and like I said, I make no claim to being a professional of any kind, I'm just winging my
way through it, and having fun, and that's the whole thing, if it's not fun for you,
don't bother doing it, but I'm going to paint this man, the eyes, a little shading of the beard,
and then I'll come back, because I know nobody likes to watch the painting video, so I'll come
back with this all finished up, and yeah, we'll wrap it up, still a little bit shiny, gonna have
to buff in the morning, I just put the Howard Speed Wax on it, so it's a little bit shiny, but
there is our man, now I think he turned out okay, see what was fun about this one,
was I went deeper, and the deeper I got in the bark, the wider I could go, whereas for example,
this one here, you can see, had to go very narrow, because of the depth of the bark, so
you can see it's flared out, so the deeper you go, the more face I got on this guy, so there he is,
I like him, and I do like putting a little bit of paint on, a lot of guys keep it really natural,
but for me, I like a little bit of goofiness, and a little bit of color and character, so
that is our little guy, so if you do go check out Alec LaCasse, like I said, he'll take you
10 times farther than I can ever do in this, and yeah, if you go there, tell him I sent you,
maybe someday I'll squeak a coffee out of him, but anyway, that's the video, but on that same
note for the coffee, thanks to everyone who did buy me a coffee this week, I always appreciate it,
and I look forward to making another video for you soon, so thanks for watching,
and catch you on the next one, see you guys.
