Carving a 🐢 out of Epoxy & Wood

The Art of Sculpting
60 followers
All right, let's get right into it. This is a 545 pound solid piece of buckeye burl. This costs
around a thousand bucks and I'm going to chop it up and hopefully be able to get, you know,
two or three sculptures from this single piece. I'm currently in the process of moving and that
means that half my tools are at the new house and half are here and I cannot seem to find my
step ladder which means it is at the new house. But I look down and I find this planer. It seems
heavy enough and sturdy enough to stand on. I do not recommend doing this but you got to do what
you got to do with what you have and it luckily worked out. I had leverage to make that top cut
and here I get to open up this beautiful piece of buckeye burl. What I don't like about this
piece right here is not only do the fins extend beyond it but there was a little bit of a void
inside so I make another cut. This one looks solid and I just love the color pattern in it so we're
going to go ahead and use this one. The first thing you have to do when working with buckeye burl is
take off all the bark and debris and all the cavities inside it. And here I am at the new shop.
You could see just this clutter absolutely everywhere but I brought my burl over and it's
time to start moving things around so I can put it on the table and start working on it.
Once it's nice and cleaned up it's time to use some penetrating epoxy to seal the entire piece.
I tend to go overboard when I do this sealing process. I will do two separate layers of
penetrating epoxy over the course of two or three days and then on top of that I will do a tabletop
resin which is a thicker resin to really seal everything in. I learned the hard way that a
piece of wood will float to the surface if you just pour epoxy in there so my new method is I
will pour a very thin layer of epoxy on the bottom let that cure and that'll just act as a clamp and
it'll hold that piece of burl down for my main pour. If you guys have seen any of my previous
videos you're familiar with me using dye for all my epoxy pours. I do not like the kind of yellowish
tint of epoxy when it's straight out of the bottle so I will tint it purple and black and that'll
actually kind of neutralize that yellow color and make it more clear with a little bit of a bluish
tint to it. Once all the bubbles are degassed from the vacuum chamber it's time to do the pour and I
use around eight and a half gallons on this pour right here. On this final bucket right here I
noticed I had a pretty good size leak underneath this plastic so I luckily had some nice white
gooey stuff to shove in there and block it up. A couple hours later I decide to go check on the
leak and see if that's plugged up. I open up the fridge and I am stunned. The epoxy is already at
170 degrees Fahrenheit which means it is already reacting and the inside of the fridge is 72
degrees even though it's set at 50 which basically means my freezer cannot catch up with the heat
that is off putting on this epoxy. I'm literally sitting here watching the temperature rise inside
the fridge and I'm freaking out. I already see a couple bubbles in there, there's fractures, and it
is just looking terrible. It is now 95 degrees inside this fridge. This is an absolute disaster.
Immediately put into crisis mode. I mean if this thing starts smoking and heating up it could
literally catch on fire or catch something else on fire. I don't know if you guys have ever had a
curing cup of epoxy start smoking. We'll amplify that by eight and a half gallons. That is a very
very dangerous place to be in. Basically I just put a fan on overnight. I had it full blast right
at it and here it is the next day. You can see just fractures everywhere. So the big question is
why did this happen? I've done this before the exact same way and it's worked perfectly. Here's
what I think went wrong. I accounted for the refrigerator temperature but what I did not
account for is the sitting temperature of the epoxy. Now I keep this epoxy in my garage right
here. So that means it is the same temperature as the garage. When I pour this it was a 90 degree day
and that is way too hot to start mixing epoxy. I think I mixed that 90 degree epoxy and it was
curing immediately even though it's supposed to be a 24 to 48 hour cure. So I'm going to change this
up on the next one. But before I do I had a really cool suggestion from a couple of you over on
Instagram. They said to mix pigmented epoxy and pour it into all these different fractures and it
could have a really cool look. So that's exactly what I did. I thought that was a great idea. Thank
you guys for recommending. I quickly ran into my next problem on this one which the problems just
kept piling on on this one. I could not get it out of the fridge by myself. It's not the weight. It
is heavy. It's around 100 pounds but it's the angle that it has to come out of the fridge.
Straight vertical. So I knew this was a task for another day and luckily my dad was here the next
day which, sorry pops, I hope you didn't pop your back on that one. Anyways, we finally got it on
the table and now I get to demold. And I run into yet another problem. I did not put mold release
in this mold. This has been an absolute disaster. I basically just scrapped this one completely.
Someone actually came and picked it up on Instagram. I said, come on over, take it,
if you want it, it's yours. So I'm really interested to see what they did with it.
In the meantime I am searching for a new piece of buckeye burl and I stumble upon this little one.
But this one really intrigues me. It has so many little angles and knobs and all these little
intricate parts and to me this looks exactly like a coral reef. So I get back to work. I clean it
all up. I do the three coats of penetrating epoxy and tabletop epoxy. I remake a mold,
this time solely out of FRP which is FRP fiberglass reinforced plastic. That sounds right.
Fiberglass reinforced plastic. Yep. And I forgot to mention this time around I put all of the epoxy
that I'm using inside the fridge for 48 hours beforehand. I had it at 60 degrees. That means
this epoxy is 60 degrees when I'm pouring. You gotta be kidding me. Wow. The epoxy nightmare
continues. There's bubbles leaking out of this burl and I don't know why at this point. I do
have a theory that I'll share later but here it is the next day. Pretty much fully cured and again
this should not be curing this quickly but there are just, again, there's bubbles everywhere
leaking out of here. There is one point of happiness in this bad dream. I figured out a
way to lift this thing up without any help. I got a little eyelet, threw it in a stud in the ceiling
and then I got a little ratchet and I could just ratchet this thing straight up, put it on the
table all by myself. So here it is. It's actually a very good pour. It's crystal clear. There's
maybe one small fracture but that could be worked around but there's just bubbles everywhere
making this unusable for me. I am saving it for possible future sculpture but I'm not going to
be using this for the turtle. So back to the drawing board. I get a new piece of burl. I do
the penetrating epoxies and this time as you can see I am using a less aggressive piece of burl.
This is what I think is happening. As I'm filling up the epoxy there are deep cavities within these
intricate pieces of burl that do not fill up with epoxy. This is creating a big air pocket. When the
epoxy starts to cure it off-gasses building up the pressure in these cavities enough to push out
all this air. This is just a working theory. It makes sense to me. So when this go around
I'm going to back fill every single hole and cavity that I can find on this burl piece.
Right now I am four weeks into this. I've used now 21 gallons of epoxy which is an absurd amount
of money. I've almost diminished my entire piece of buckeye burl and I still don't have a carvable mold.
Until now. It worked and it was a picture perfect pour. There are three bubbles in this entire piece
right here and that is on the surface so it does not matter. No fractures, no cracks, crystal clear.
I am beyond pumped. I feel like a little kid on Christmas morning unwrapping the biggest present.
This is beyond exciting for me. Everything went smoothly besides for some reason the melamine on
the bottom side did not want to release so I don't know what happened there. But we are ready
for carving and like all my sculptures I hire a 3d artist Laura Mercado to do a 3d rendering and I
use the profile overhead and underside views to help me out with my carving. So without further
ado let's get to why we all decided to click on this video and that was to watch a carving of a
I've ever been more nervous to do a carving. Up to this point this has been very very frustrating
and this has taken three times the amount of time that it should have taken to get to this point.
But I can't really think about that. All I can think about is just cutting to the line
and using my templates as guides to make the next cuts. I completely forgot about the melamine that
was on the underside until I flipped it over so I got out the big chainsaw again and I just went to
town and and hacked it away as quickly as I could. I'm really lucky actually that I drew the template
line slightly above this because I didn't even see the melamine on the bottom and it actually
raised this sculpture you know three quarters of an inch and when I was doing my template lines I
didn't even account for the melamine on the bottom so luckily I happened to make them three quarters
of an inch above the bottom. But that could have been a disaster in the making and that would have
been pretty accurate with how this was going up until now. But all is good so far.
Just kind of carving away the bulk of the materials and I'm pretty much done with the
chainsaw. Now I'm going to switch over to my angle grinder and this is when the mess really starts to
happen. You really get to see the sculpture kind of take shape in front of your eyes when you're
carving with an angle grinder with a very aggressive disc like this. And you can see I
wasn't kidding about this getting messy. This is uh this is not like sawdust. Epoxy dust is on a
completely new level and if any of you have ever worked with epoxy and sanded or done anything like
this you'll know that it is a devil dust. It sticks to everything. It's electrically charged
or has a lot of static so it doesn't just blow away and come off. It is very very sticky. It
sticks to your tools. It sticks to you. It even sticks to the air hose that you're trying to clean
things with. So not a fun mess to clean up. Anyways to get back to the sculpture I'm refining
all the details. I just traced on the turtle shell and I think the shell is really the highlight of
this piece because it's so detailed and intricate and I'm going to have a smooth surface on top
which means I'll get to polish it crystal clear. I really wonder what my new neighbors think of
me coming out of the garage in a full hazmat suit mask on and moon dust everywhere. They probably
think I'm cooking meth or something. Hopefully they watch some of these videos and they see that
I'm just carving a turtle. That's all I'm doing here just carving a turtle nothing suspicious.
Anyways I refine the head, draw on the scales, and then use my die grinder to kind of refine
the shapes of the turtle head. Once I have all the details kind of carved in and close enough
to how I want the finished product it's time to start sanding and I can still shape a lot
with the sander but this is one tedious process. One of the hardest and most tedious parts of this
is actually inside the turtle shell all these little grooves that have little saw marks and
burr marks. I have to basically hand sand almost all of these lines and here I switch to this small
orbital pneumatic sander to really get into tighter areas that I can't reach with the big orbital.
This is actually the first time I've used this UV cure stuff and it's actually really cool.
It's very much like epoxy but without the wait time. I just get to put a little UV light on it
and it instantly cures and then it's completely sandable like epoxy. I'm actually going to fill
a lot of holes with this here on out so it's a very cool product. One of the difficulties in
working with epoxy is if you want a crystal clear finish you have to sand all the way up to 5000
grit. So on this sculpture I went from 80 grit all the way up to hand sanding up to 5000 before
putting on polish and that really makes this thing crystal clear when it's finished. Nothing has
been more rewarding in my sculptural career than putting finish on this sculpture. This sculpture
has had so many drawbacks. It has been eight weeks since pouring my first mold that didn't work
and this is just extremely rewarding to put the finishing touches on this sculpture.
Now that the sculpture is done it's time to start looking at display options. I've had
this piece of buckeye burl that looks like driftwood drying in my garage for almost a year
with this specific purpose for this turtle. I want this turtle to look like it's swimming
upwards in a diagonal swimming motion and this thing is going to be perfect. Right here where
I'm grabbing this, this perfectly placed branch is actually going to be where the turtle is mounted
on. So I have everything kind of dialed in and I'm sanding it and shaping the edges to look like they
are old live edges and to me this this is a perfect display piece. It looks just like a piece of
driftwood although it is buckeye burl and it is not driftwood. It was sitting in the Fresno heat
for years so it's just a perfect display piece and I can't wait to get this thing on there.
Before we get to the big reveal I want to ask you guys what do you want to see me carve next?
Let me know down in the comments. I try and read as many comments as I possibly can
and if you like this video please consider subscribing so you can stay up to date
on all my future projects like this big boy right here.
All right let's get to the final reveal. I'm so glad with how this sculpture turned out. It's
better than I ever could have imagined. I love the pedestal and the angle the turtle is at and just
the shell and that crystal clear epoxy I think really make this thing pop. Thank you guys for
watching this video. If you like it be sure to hit that subscription button, give me a thumbs up
and I'll see you guys next time.
