36 Video Views·Oct 29, 2024 #DadHowDoI #RobKenney #siding How to Fix a Hole in Siding
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #siding #fixsiding
hey kids so today i'm going to show you
how to replace a piece of siding there
actually was a hole here and i just
replaced it so i'm going to show you i'm
going to walk you through what i did
uh but i do have a dad joke for you
before we get started so
a guy walks into a hardware store
and he says i need a ladder to work on
my siding and to get up on my roof
so the guy says we have a six foot
ladder that will work for your siding
and an extension ladder that will get
you up on your roof do you want them
both
and the guy says i'll take the former
now and the latter ladder later
so anyway let's get started
okay so i have this hole here because so
this um when we did our kitchen remodel
this used to be our kitchen and our
kitchen's at the other side of the house
now so this actually used to be a vent
for
our dishwasher
and there used to be a
a pipe coming out of here and running
straight down so obviously this is
what's left and when we were redoing the
inside i put a this is a two by four
right inside there nice and solid but i
obviously need to fix this and so um
what i'm gonna have to do unfortunately
it's affecting this piece of siding and
this piece of siding so this one's going
to be fairly easy because i'm just going
to cut it right here and cut it right
here and pop this out
and then you know
it probably got some paint that's kind
of sealed so you just take a knife and
run it alongside there so that it
doesn't uh pop this out too and kind of
make a mess we want it to be nice and
clean
and then we'll have to kind of pry
things out and we'll pop that one out
and then with this one because it's kind
of here and it's part of with the window
here i don't want my my groove to be
right here i probably want it like right
here somewhere over here where it's
staggered
okay so i'll probably cut it like here
and just replace this piece and then but
i'm going to replace this whole piece
and then we don't have to mess with this
at all
all right so looks like i got a nail
here i'm just going to pull that out
okay
let's see here i might even be able to
use this piece right here
um i'll cut it off here take that and
then end up putting it here uh may as
well because i think that's enough of a
piece to fit there so i just use a knife
so we're just going to kind of cut away
here
it's kind of tight so
you get what i'm doing though i'm
basically just going to run a nice
straight line there right all right so
hopefully you can see now now
i can
you probably can't exactly see that but
you know what i'm doing right i'm trying
to i'm trying to get that free from the
paint or if there was caulk two that was
holding it together
okay
so that's what we're trying to do here
okay
and then we'll end up caulking uh the
new stuff later so
and it'll be fine and painted later
okay
basically we're trying to mess with this
and this so i just want to make sure
it's free good
okay
okay
and then we'll go here
so we're going to remove that whole
thing
okay
like that we're just going to want to
try to pry that out of there
okay
i can see where the nail is here to it
so if i can get up underneath there
let's see here
okay
okay
you see that nail
right there
that just popped loose so now i can yank
that out
[Music]
to help set it free let's see
much easier now
and there was that nail right here that
i already removed
okay
there we go
kind of set it free
okay and
so actually i can go ahead and cut this
now i'm gonna cut it
uh you know what remember how i was
gonna use that other piece i got plenty
of siding from when they when we did my
remodel on the house so it's no big deal
i'm not going to be able to do that now
because that that split right there
right
i have to go ahead and cut
cut that
so that it can free up because we're
going to need to shove that other piece
up underneath there right so let's go
ahead and
just cut aside
and cut the side i don't need that i'm
going to try not to go ahead and mess
with that
let's do that
okay
now
okay we're just trying to get that away
from there
enough to where we'll be able to slide
the next one up underneath there okay
i might be able to pop that out down
okay
there's a nail right there
i want to remove that so that this thing
can slide
up underneath there
and i can see a nail right here too
okay all right so here's what i'm going
to do now
i'm going to draw
a line right here
all right so here's my level and so now
this makes it good so i'm not
wonky like this i can actually make sure
that i'm level
by checking the bubble here and i'm
going to get as close as i can over to
this thing over to this where the hole
is
okay and let's make it level
okay that looks good right there
so that's where i'm going to make my
line right here because i want to remove
this i don't want to remove that i'm
going to leave that alone okay
uh so
and i'm going to show you the tool i'm
going to use
this is called an oscillating multi-tool
i will do a tool tuesday on this because
it's such a great tool and so what what
this does
you know there's different ways you
could do this you could score this with
a knife and go over and over again be
really careful with it especially since
you're only doing one
um
or
you could use a you know
just a regular saw and kind of work on
it and be really careful but this will
make quick work of it because what
happens is this blade right here just
goes back and forth really fast okay so
i'm just going to be able to go like
this put it here and work it down
okay but what i want to do
is you got to be careful because i don't
want to go into
the siding behind me it's not going to
be a huge deal but right down here we
definitely don't want to do that right
because then you'll see that um and
really like i said overkill it's
probably not that big a deal because we
can just run a bit of caulk there but
what we can do is we can kind of pull
this away a little bit and then
stick something underneath there a piece
of metal or something to stop the the
blade from going all the way through so
that's how i'm gonna do it just to show
you all right so i just got this piece
of real thin sheet metal okay um i have
scraps all over the place stuff like
this i'm sure you can
understand that um if you ever
have been in a
somebody's shop they have stuff that's
just hanging around so i'm just going to
do that just to protect it and then
again this line doesn't need to be
perfect but what you could do i mean
there's a couple things you could do you
could put something up here as your
guide and then just have that thing just
go right down or
you can just freehand it let's see how
that goes i'm just going to try to
freehand it
okay
and they make these oscillating tools um
cordless
so
but i happen to have a
outlet right here so i'm just going to
go ahead and do this here
[Music]
so
[Music]
there you go
and then you can see
uh
what you got underneath here right and
so that so as we
as we rebuild this now you want to
always do siding
from bottom to top right um so normally
if this wasn't here and you were just
doing your own siding obviously start
from the bottom and just layer it and
layer it and layer it but now we're
going to have to kind of work with this
we're going to put a piece of siding in
here
if you can see my home
this is built in the 70s and it's kind
of a strange thing that they've done
here this is like a
insulation of some sort i put the
backing in here of this wood and then
put a lot of insulation on the inside
when we were doing our remodel but this
is a little bit hokey
but this is covered too and we live in a
relatively mild climate the real way to
do this was probably to pull all this
out and actually replace it with
with plywood but we're not going to do
that right so um
anyway so we probably do want to put
something in here
just
ah i mean i don't know that it would
hurt if i end up just putting siding and
putting siding nobody's ever gonna know
that's there
but i will
so
i gotta see what i have that i can maybe
just fill that gap with uh
so let me go see what i can come up with
all right so here's what i'm going to do
i found a piece of wood that was able to
cut down to this size it's a little bit
bigger than what i what i need there
which is perfect so
then i'm just going to go ahead and draw
a line around it
make it nice and clean like that and
let's see here
[Music]
[Applause]
so there we go
put a couple of
nails in there
i need to get these measurements i'm
gonna go ahead and
shoot this in
okay we're gonna put that one in there
okay
that looks pretty good and these little
gaps here we're just going to fill those
in with caulk so that's no big deal
okay and the last piece
right here remember we pried this up
this one up so that we could slide this
in the back
okay
okay
all right you know what there's a one
nail here that i'm fighting so um
because
we want the same reveal here right and
this is not quite the same this is a
little smaller this is a little bigger
so we're gonna have to remove that nail
okay
so i've been fighting with this for a
little bit so i just want to be
transparent with you there was a nail
here that i was fighting with trying to
get it up there and then there's
actually a nail here and
these side cutters work great for this
for removing these so i had to kind of
get inside there
and
keep working at it and finally i'm
pulling this thing out okay
because i was fighting that and that's
why that thing wouldn't slide up in
there so we should be good now
okay so now we're just sliding it up
inside
i was actually
i put a notch in here trying to work
around it see that i just cut a little
notch because you're not going to see it
i was going to try to do that but it
just i still was fighting it so i just
went ahead and
got that nail out so now
now we're good to go
you can just see what your reveal is
here this is four and a half
and if you need to tap this if for some
reason you need to tap it you want to
get a separate block
and put it here and then just tap on it
you don't want to tap on your siding
right because then you'll you'll leave
marks in your siding but if you put a
block of wood here
and you just tap on it that'll keep you
from from making those marks right so
all right so i think we're about good
yep looks good let's go ahead and
put her in
[Music]
all right so now all you'll do is just
go back through it here and these
fill up in those with caulk and then we
actually have some spare paint we had
our
house painted uh a couple years ago we
ended up getting with some getting some
extra paint so i'm just gonna paint over
this even though this actually is our
this was painted and it was removed from
our backyard so you want to make sure
that it looks nice and clean and there
we go
all right so i hope that was helpful for
you you know it might be a little bit
different on your house you might have
vinyl siding this is cedar siding uh the
sighting might be running a different
way but you get the general idea of what
you're looking at in order to in order
to repair a hole if you have it on in
your sighting so
thanks for watching and god bless you