27 Video Views·Oct 29, 2024 #DadHowDoI #RobKenney How to Install a Kitchen Faucet
This video is sponsored by American Standard
In this video I show you how to install this faucet; https://bit.ly/DHDI_Faucet
The steps shown in this video will also help you to install most other kitchen faucets.
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney
hey kids nice to see you again so today
I'm going to show you how to install a
kitchen faucet and today's video is
actually sponsored by American Standard
and I don't know about you but uh for me
when I think of American Standard I
think of quality uh bathroom products
like toilets and sinks and that sort of
thing but boy they sure have some nice
faucets as well and so they reached out
to me and I thought it's perfect cuz
when I remodeled my kitchen I could show
how to install that so this video will
show you how to install a semipro
kitchen faucet uh the install on other
semi-pros is generally uh about the same
uh they should be close and this gives
you a nice understanding of how that's
all hooked up so I think this will help
you with you know other faucets as well
um but first I have a dad joke for you
so uh you know at one point I thought
about going into building countertops
for kitchens but then I realized it was
counter production
ah so anyway let's get started this is
how you install uh an American Standard
it's called the studio s uh faucet and
this is new construction right so we're
in the middle of a kitchen remodel as
you can see it's a little bit of a mess
here but I wanted to walk you through
how to install this and you know when
they cut our our Island the countertop
or the yeah the countertop and for the
sink and they asked us how many holes we
wanted and we opted for three I think
it's a good idea to just go ahead and
get the three cut because you know
sometimes you'll get a sink that will
have two knobs but what we're going to
use our three for uh so that then
they're there for somebody if they want
to switch the faucet uh we're going to
have the faucet here and the faucet
actually has uh the the control right on
the faucet I'll show you that in just a
second and then um we're going to have a
push button for our garbage disposal and
then we're going to have a soap
dispenser here so we just opted for the
three and then that way you got options
right cuz if we just did two and then
later somebody wanted to change the
faucet then they'd be stuck or they'd
have to drill a new hole so I'm just
going to walk you through that now uh so
here is the faucet it's called a studio
s okay pretty nice
faucet and it's fairly easy to install
Okay so it comes let's
see comes with this and
you know get a closeup of all this here
in just a minute I I backed up because I
wanted you to see these three holes that
we had and now we can we can move it in
a little closer but there's uh just a
few parts that come with it okay I
actually have these already sitting out
here the first one is this it's a it's a
ring and you can see where it goes it's
going to go up right inside this there's
a spot for it so I'm going to move the
camera so you can see all this
stuff okay so this is what what the
faucet consists of I'm just going to go
and set this down gently
here okay as you can see this is the
control here right for the for the water
okay and it actually has a a spray
nozzle built into it and as you can see
on these hoses they're marked with a red
stripe and a blue stripe so red is hot
of course and blue is cold and then this
is the spray okay so what it's going to
do is when we get um down underneath
we're going to feed all these through
here okay through the center one and
then when this up when we're up
underneath there this is going to I'm
going to show you this now because it's
going to be harder to see when you're up
inside there this is going to go here
it's going to slide in and then this is
going to slide over the top of it just
like that okay so but I'll show I'll try
to show you that from underneath but I
thought I'd show that to you now while I
could okay so this is the piece here I
want to make sure you can actually see
it
okay that's the piece that's going to
slide over the top of this and fit in
there okay and then you got this one
that's a little uh flatter than that one
I guess it's got a little this one's
sticking up just a little bit more uh
and so that will be the next piece when
we're underneath we're going to put that
on then we're going to put this
on okay like that and then we're going
to screw this on okay we're going to
screw it onto these threads RS and we're
just going to spin that around and then
once you get it tight then you take
these these screws right here and you
just tighten those up to make sure it's
good and tight okay and then that'll be
what that looks like from down below
okay okay so you can see you got a
couple rubber gaskets here okay and
one's a little thinner and what this
one's for is we're going to slip that on
we slip it on over
these guys here and it goes all the way
up in here and then it actually fits
right inside here I'm going try to show
that to
you it just fits right inside there okay
and that's going to sit on the
top
okay all right so now we're going to go
ahead and feed our hoses down inside
okay just like that I got a little bit
of piping down there so I'm fighting
that a little bit but there we go just
like that one thing I noticed on this
too is if you wanted to have this I
we're going to have it on our right side
it looks like you could
actually put it on the left side if you
wanted to but we're putting it on the
right
side okay so that's that and then I'm
going to show you from down underneath
what all that looks like
okay let's try it
again fairly tight up in here oh we need
that one
[Music]
too okay
now that guy is going to go over
there we got the biggest
sink cuz we wanted to make sure we had a
big sink but boy it's uh sure it's tight
back
here
okay remember the order that I told you
that all those pieces went
in it's kind of hard to show you now so
here here we go though okay now that we
got let's see so the rubber is first
right then I got this piece that's going
to push against it once I tighten those
screws
[Music]
down let me make sure you're seeing
that yep I think you're seeing that so
I'm just going to keep keep cruising
here
[Music]
I got a lot of threads on
it kind of nice actually cuz I was able
to get it
started down here fairly close to me
right okay we're getting close to it
being kind of tight okay and those
screws sure are handy
to get it kind of tight and then now
we'll just use a
screwdriver hand tighten it right now
but we'll just use a screw driver and
tighten all three of those up
okay and then that'll make sure that's
secure all right let me get a
screwdriver okay I'm going
to try to use my drill
[Music]
all right so I'm going to go ahead and
connect this guy while I
can okay so that just slides into
there and Clips in and there's a little
collar that slides over the top of
it okay okay that's locked in
good okay so this is my hot and this is
my cold okay and so I'm going to hook
those two up I'm going to use teflon
tape which I've showed you before in
another video all it is is just it's
like a plastic well it's t made a tlon I
guess and it whenever you're connecting
metal on metal you always want to use
teflon tape okay metal threads because
that just keeps it makes it a nice seal
and we have um you know these things are
facing this way so I have uh uh some
threads here and I actually have some
threads here because um my dishwasher
will connect to that my dishwasher isn't
here yet so I had to cap this I just put
a a cap on it I used um Teflon tape and
then I put a cap on that particular one
cuz when you turn this on uh you're
going to have water going out both those
um so I had to cap that it'll come off
of here for my for my faucet and then
this will be the one for the uh for the
cold okay it's going to be a little
little tight here so I don't know if I'm
going to be able to show this to you but
I can at least kind of show you what I'm
going to
do if I can get to it and still keep my
camera in place okay so this guy is
going to connect right here okay but I'm
going to put on some Teflon tape on it
and then I'm going to tighten it okay
and then same thing with the the blue
one it's going to connect right here
okay and I'm going to put some Teflon
tape on that so so what you want to do
because I'm not going to be able to show
you this I don't think you just put the
Teflon tape on clockwise okay so we're
going to put this on and we're going to
wrap it clockwise the same way that
we're actually screwing the the nut on
okay so um I'm gonna try to record this
if I can but it might be hard um because
I just don't have a whole lot of room
under
here and then that guy is going to go
right onto
there got the red stripes onto the hot
[Music]
okay let's get it start it first
okay so now I'm just threading that
on okay and then I'm going to tighten
that
up I had my wrench right
here okay don't overtighten this right
just want to make it snug but don't
overtighten it
okay all right so we're good there we're
going to do the same thing on the
cold okay we're going to try to do get
get a shot of this but you just saw how
I did the the hot water so you just do
the cold water the same
way thankfully there's a little wiggle
room with the the pipes so I can move
them around
[Music]
okay I'll have the Moment of Truth here
in just a second see if it actually
makes sure things don't
leak we've been without a kitchen faucet
for about 3 weeks
so we are excited to get this going
okay now let's see is that not the right
[Music]
size I think I might need a different
wrench for this one let's see no there
we go I just wasn't putting it on right
okay again don't overtighten you just
want it snug though you don't want it
loose and you don't want it too tight
okay I think that looks pretty good I'm
going to go ahead and turn on the water
now okay the Moment of Truth we're
turning on the
water okay let's try the other
one okay should be good let's go try out
our our faucet from
above okay moment of truth let's check
it
out woohoo
there going to be air air in the Lin and
show you for a little
bit all right so here it is uh you know
we've owned it for about 2 months now
and we absolutely love it uh you know
couldn't be Happ happier with it it's
very well made and as long as you you
install it correctly I think you'll have
it and love it for years um cuz it's a
nice solid base here and then it's got
the nice coil to cover up the hose
that's coming through here to make it
practical you know I like practical
things uh and you know it's fairly
simple and yet it's really nice looking
and so you just turn it on there for
cold and turn it up for hot and then you
have the um
lever here that just turns this into a
shower if you want it and then this just
unclips like that right and then you can
do like that so and then it goes right
back in uh pretty simple yet it uh
really adds to our kitchen we're very
pleased with this faucet