#embroidery#hobby#relaxing For my Fans! You will learn how to fasten the working thread and how to start the magical hardanger embroidery. Для моїх Шанувальників! Ви дізнаєтесь як закріплювати робочу нитку та як розпочинати чарівну вишивку хардангер.
Я вдячна, що вас цікавлять мої роботи та у мене в запасі ще є багато гарних ідей, які я маю намір показати, тож підписуйтесь і ми будемо творити прекрасні речі разом! I appreciate your interest in my videos, I have many more interesting ideas in store that I intend to show, so subscribe and we will create beautiful things together! Оn my channel, you will find clear step-by-step videos for all needlework lovers, which are made with hard work and passionate love for creating beauty! На моєму каналі ви знайдете зрозумілі покрокові відео для всіх любителів рукоділля, які зроблені наполегливою працею та пристрасною любов'ю до створення прекрасного!
Всі опубліковані роботи виконані мною особисто та показані в доступній формі. All published works are made by me personally and are shown in an accessible form.
Також щиро дякую всім за підписку та коментарі до моїх відео. Also, I sincerely thank everyone for subscribe and comment on my videos.
Dear lovers of needlework,
I congratulate you!
This time
I bring to your attention
a delicate
openwork embroidery
with undercutting
of the edge of the product.
You can decorate
a wide variety of products with this embroidery
.
It can be used
in the corners,
across
and along the length of the product.
I divided
all the work from the selection of material
to the execution
of the finished product
into stages.
Here's what it looks like.
I am embroidering
on a uniform Anchor
embroidery fabric with 25ct DMC Perle #8 cotton threads,
colors
#B5200
and #754 . A blunt needle
with a wide eye.
I take
four threads of fabric
for one stitch .
I leave a part of the thread
that I will fix later
and perform embroidery, alternating
horizontal and vertical rows
in each of which there
are five stitches.
All the upper stitches of the embroidery
are parallel to the threads of the fabric.
For embroidery
, I take as a basis a square
with
four threads of fabric on the side.
Now I am embroidering
two sides of the square
on the corner of the product,
making
a diagonal line
for five squares.
I bring out the working thread
left at the beginning of embroidery
to the wrong side.
I fix
I embroider five stitches
through four threads of fabric.
You see.
This is how I perform
the required length
of the sides of the product
and the corners,
embroidering the square
in two steps.
First, I embroider one part of the square
along the entire contour of the product
.
Look here.
I finish embroidering
the first part of the squares
and immediately proceed
to embroidering
. I embroider
the even side of the product.
Now look at the
diagonal embroidery.
I do the corner.
I am finishing the embroidery
on the outer part of the product.
I pull the thread
to the wrong side.
I fasten
and cut off the excess thread. I take
four threads of fabric
for one stitch .
I leave a part of the thread
that I will fasten later.
Look, I make
five stitches,
retreat
four threads of fabric
and
make five stitches again.
Stitches should be sewn
on one line.
This will be the embroidery corner.
The stitches must be sewn
on the same line
and parallel
to each other.
I perform
all four sides
of the product in this way.
This will be a corner of embroidery.
Here, look,
this is the working thread
, and this is
the beginning of the thread.
I bring it
to the wrong side
, fasten it
and cut off the excess thread.
I need to go over here.
I bring the thread
to the wrong side.
I turn the product to the front side
and continue the embroidery.
I am finishing up the embroidery
on the inside.
I bring
the needle with the working thread
to the wrong side. I fasten and cut off the excess thread.
I make
five stitches.
For one stitch, I also take
four threads of fabric.
I leave the beginning of the thread again.
Now I'm moving to another line.
I am finishing the embroidery of the central part of the product.
I bring out the threads on the wrong side.
I fix them.
For one stitch I
again take
four threads of fabric. I leave
the beginning of the thread
.
Now I am embroidering a corner.
I go to another line.
You see.
I embroider the corner stitches
on the same line as
the main embroidery.
I make
three small windows in the corner.
I finished the embroidery of the corner.
I pull the threads to the wrong side.
This is how I do all four
corners.
Next, I continue the embroidery on
the front side of the product.
I pull the thread.
This is the middle of the square.
I
stitch across one thread of fabric.
At the same time, I make stitches and
fasten
the beginning of the thread.
During embroidery, I
pull the stitches a little
, due to which
I get
a hole in the middle.
I make the four sides of the square like this
.
I pull the needle
to the wrong side
and move to the next square.
I turn the product to the front side
and then continue the embroidery
from the front side.
I move to the next square
and continue the embroidery.
I am finishing the embroidery of the squares.
I pull the thread
to the wrong side
of the product.
I fix the thread.
Now let's see.
I hope
this video will give you many interesting
creative ideas.
Oksana Blaguta
was with you .
Stay with me and see
the continuation of the embroidery
of this product.
Thank you for viewing.
Make this beauty 💖