#stepbystep#tips#embroidery#howtomake For my Fans! In this video, I am embroidering a grid of squares and finishing the edge of the product with serrations. Для моїх Шанувальників! У цьому відео виконую вишивку мережкою квадратики та завершую край виробу зубцюванням.
How to process the edge of embroidery. Processing of the edge of the product. Design of embroidery corners. Embroidery on the corners of the napkin Author's ideas for embroidery. Popular squares. Embroidery design. How to make corner embroidery? How to frame the edge of the product?
Як обробити край вишивки. Обробка краю виробу. Дизайн куточків вишивки. Вишивка по куточках серветки Авторські ідеї для вишивки. Популярні квадратики. Дизайн вишивки. Як зробити кутову вишивку? Як обрамити край виробу? Також щиро дякую всім за підписку та коментарі до моїх відео. Also, I sincerely thank everyone for subscribe and comment on my videos.
Dear lovers of needlework!
I congratulate you!
Today, for your attention
, here is such a charming decoration,
which I made
with a net.
With this decoration, you can complete
the finished embroidery,
use it as the main embroidery
, and also add
to the overall composition of the ornament.
In this way, you can
decorate not only products that have corners -
tablecloths, napkins
, but also the edge of a towel, a path...
Also, finishing the edge of clothes
, especially embroidered ones,
will be exquisite .
I tried to show all the important points
so that anyone who wants
to can reproduce this embroidery.
I perform the decoration on a piece of
white home-spun fabric No. 30.
This is a cotton fabric
that is made
specifically for embroidery.
Before
work, I cover it
with an auxiliary thread.
Now I use a needle for embroidery
of medium thickness
with a wide eye.
For embroidery, I
took muslin threads.
They are in the color palette number
603.
In this work, I
will embroider
with two threads.
You can adjust
this decoration to your products
by choosing embroidery
materials
that you are comfortable working with.
I pull out one thread,
which I fold in half
so that
a loop is formed from one edge.
I retreat from the edge
about 5.5 cm
and fasten the thread.
I begin to embroider
the first corner square.
For one column, I take
three threads of fabric.
Here you see,
here are these three threads of cloth.
I charge them.
Now I
count the center of this square
and insert the needle with the working thread,
here it is
in the center of the square.
Each side of my square
has four columns,
each of which
has three threads of fabric.
I bring the needle
with the working thread
from the center of the square,
grab three threads of fabric,
perform a column
of the upper side of the square
, return to the center
of the square
and again
bring the needle
with the working thread
from the center to perform the next stitch.
After making one side
of the square
, I will make
three more sides of the square in this way.
Now I embroider
the columns of the side of the square.
Each time I
count three threads
of fabric
for one column.
You can take
the number of threads in a column
and the number of columns
for one side of the square
arbitrarily , depending
on the embroidery ornament
you have chosen
. A corner square in embroidery
has
all four sides embroidered.
I finish embroidering the corner square
and now move on
to embroidering
the next square.
To do this, I
calculate
the center of the square.
Here is the middle
of the side. I count
six threads of fabric
from it .
Here is the center of the square.
Now I'm moving on
to embroidering the next square again,
leaving the fourth side of the square
unsewn
.
I will embroider
all the following
squares
in the same way,
only with three
sides. I will embroider
the fourth side
later.
Again, for each square,
I calculate
the center of the square.
Now the thread ends.
I bring it out
to the wrong side,
pull it through.
Now I take
a new thread and continue embroidering.
I fold the thread in half,
making a loop.
I will show you several possible
thread anchors
so that you can
apply them
in the right place
when embroidering
this decoration.
You see, I fixed the thread
and continue to
embroider.
Now I'm doing
a corner square.
I will move
from one row
to another.
All four sides
will be embroidered
in this corner square .
You see, I am sewing
the fourth side
of the square.
And I go to another line.
I calculate the center of the square again
,
here it is.
And in the same way,
I continue to
embroider squares.
Every time
I make sure that
I have three threads of fabric for
one stitch
.
So that my square is
equilateral.
I continue to embroider
until I need
the number of squares.
Such squares
will be placed
on this side.
I'm showing you the fastening of the thread again
,
you see.
I've
run out of threads.
Look, I'm turning her
inside
out again.
I'm stretching.
I'm taking a new thread.
You see, I have
a different way
of attaching the thread here
, because I
ran out of thread,
but I continue to
embroider the square.
So that I
get a square that
corresponds to
the pattern of my embroidery,
I fasten the thread
in this way .
And I begin to perform
another side,
the fourth side,
a square.
This is the fourth side
I will embroider
all over the product.
I ran out of thread.
I fix it again
.
Here I fasten
and embroider
in the usual way.
I embroider
the fourth side of the square
all over the product.
Look,
now I'm moving
from one square to another.
I make
the transition
from one
row of embroidery
of the fourth side
to another row,
you see,
at the corner.
But here, in the corner, I decided to embroider
one more square.
But for that, here he is.
I need to find
the center of the square,
you see.
This is the middle of
the sides of both
side squares.
And I embroider
another square.
I
will embroider
such squares
on the opposite corners
of the product.
Moving again
to perform
the fourth side.
And I finish
all over the product.
Next.
I pull out one thread at a
time. You see, these threads,
I cut them with scissors
and pull them out.
You can pull it out
from the wrong side
of the product.
I pull out here
from the front side
, then I will bring
the threads
to
the wrong side of the product.
Here are the threads I'm pulling.
Here they are.
Now I bring out these threads,
this is the wrong side
of the product,
I bring out the threads
on the wrong side
and pull them through with a needle.
Now I turn the product over
to the front side
and make a net
with a single stick. I take
three threads of fabric
for one stitch .
These three threads correspond
to the same threads
that I
combined into columns
when making the square.
Having completed the execution of the net
on the inner side,
I perform
the embroidery of a single twig
on the outer side
of the embroidery.
From the wrong side, I fasten
the thread,
bring it to the front side
, and make a net
with a single stick,
combining
three threads of fabric for one stitch.
The same threads that I used to connect
making
a grid of squares.
I make a corner and continue in this way
throughout the product.
This is what
embroidery is.
From this place
, I count 24 threads of fabric
on both sides.
I work from the front side
of the product.
I fasten the thread
in the tone of the fabric
and knit a
single strand from the edge of the fabric,
taking
three fabric threads for one stitch.
I pull the threads that
are opposite to the threads
of the completed grid of squares.
I will make a corner.
I go to the next row
and again continue to perform the chain of
a single twig.
Having completed the execution of
a single rod,
I bring the needle and thread
to the wrong side of the product.
Here is
the working
thread,
I am pinning it.
I return to the front side
of the embroidery,
fasten the working thread
and make a net
by joining two rods.
Next, I make a stitch above the decking
. I pull the needle with the working thread,
bring
the needle
to the wrong side
between the columns and
pass it under one thread,
joining the two rods
again
to make
the next column.
Now
I pull the needle with the working thread from top to bottom.
I bring it to the wrong side.
From the wrong side,
I bring it back to the front side
to perform the next column.
I make sure every time that
I have
the same number
of decks in all columns.
I perform a stitch
that lies on top.
This is how I bring out the needle with the working thread
to make another layer.
I thread the needle with the working thread.
Now,
I bring the needle with the working thread
to the wrong side of the product
and fasten
the thread.
I move on to the front side of the embroidery.
I fasten the thread.
For the right column,
I perform the movement,
bringing the needle out
for the left column
and turn
to perform the flooring.
I bring out the left column
with a stitch that covers
this flooring.
Having completed all the columns,
I proceed to the implementation of the corner.
I bend the corner,
folding so
that my stacks coincide with
the corner.
This is how I will sew the corner.
I take an auxiliary thread
in the tone of the fabric
and sew the corner.
I reach the columns,
fasten the thread.
Here we look at the corner.
This will be the edge of the product
from the columns.
Now I need to fasten these columns.
For this, I take a needle with a working thread.
I fasten the thread.
I insert the needle with the working thread
from the front side
in the middle of the column
and bring it out to the wrong side,
also in the middle of the column.
I make sure
not to sew
a corner.
Here he is, a corner.
I tighten the thread a little
so that
the column is bent in half.
I repeat this along the entire edge of the product.
I performed one row
of fastening the column
with a thread.
So that
the columns are fixed on both sides,
I insert
a needle with a working thread, also from the front side,
in the reverse direction
on the wrong side in the middle of the column
and turn again.
With such simple movements, I fasten
the columns.
Here is the front side.
This is the wrong side
of the product.
Let's see what seams
are made.
It remains
to perform the bending.
Now from this point on both sides
I count nine threads of fabric
and pull out a track
of three threads.
This is the downside.
I cut a corner.
Now I make the hem of the product
and fasten it
with an auxiliary thread.
Here,
what a hem.
Now, from the wrong side of the product,
I knit a single rod
while bending the product.
I fasten
the thread
and make a single twig,
taking
three threads of fabric for one stitch.
Pulled threads on the corner.
With them I perform the action
as with an ordinary twig.
I will make a corner.
Here you see,
two threads.
I combine
the second three strands
of the twig.
The threads of the twig that I combine
must match.
This is how I finish
the entire product,
performing a mesh and at the same time
hemming the product.
I fasten the thread.
Here is
the front side of the product.
The next step, I make a net
by joining three threads of fabric
from the opposite side.
I fasten the thread
and make a network with a double twig.
I combine the pulled threads
with the neighboring twig.
I bring out the pulled threads
to the wrong side of the product,
pull them
into the adjacent rod,
into the hem.
Now I am finishing the execution of the network.
I bring
the working thread
to the wrong side.
Let's see.
Extraordinary beauty.
This is the wrong side of the product.
This is the front side.
I love it!
Well, just magical and beautiful!
I hope this video will give you many interesting
creative ideas.
Oksana Blaguta was with you.
Thank you for viewing.