АЖУРНІ КВАДРАТИКИ | Солов’їні вічка | ПОПУЛЯРНА ВИШИВКА І Openwork squares

Greetings, dear lovers of needlework! This time I offer you a popular embroidery that I perform in a special way. It can be used in the corners, across and along the length of the product. Thanks to the beautiful openwork look and ease of execution, this embroidery can be used to decorate a wide variety of products , as this embroidery will add originality to each of them. For work, I selected a 16ct white canvas and DMC #300 and #741 silk moulin . Next, I will continue to embroider on the front side of the product, taking as a basis a square with a side of four threads of fabric. I fold the working thread in half, making a loop, pull two threads of the fabric and simultaneously fasten the working thread. I make stitches of different lengths in the middle of one of the sides of an imaginary square. Look, now I'm doing a corner and moving to another row. I leave the thread and as the embroidery progresses, I pull out the thread of the fabric and perform the required length of the seam. Now I move on to embroidering the same seam from the opposite side. Here, too, I take as a basis a square with four threads of fabric on each side . By making a stitch at the same time, I secure the working thread, you see. I make a corner and move to another row. I also leave the thread and as the embroidery progresses, I pull out one thread of the fabric and sew a seam of the required length. Now look: I sewed the seam on both sides of the track. Here are these corner threads, I bring them to the wrong side. I fasten by pulling under the stitches. I embroider a corner. Please note that your corner may be different depending on the length of the embroidered seam. Now, in each of these squares, I will embroider a small square with four threads of fabric on the side. Here, the point of the needle points to the middle of this square. I make the first stitch, with which I immediately secure the working thread, you see. At the same time , I tighten the stitches a little so that a hole is formed. The square is ready. I bring the thread to the wrong side. I fix Now in each of these squares I make small squares with a hole in the middle and I make each square separately, each time fixing the working thread, you see. This is the front side of the embroidery. I fasten the working thread. Now I perform side stitches around the middle of the square. I bring the thread to the wrong side. I fasten. Next, I perform embroidery on the front side of the product. I take a new thread, make a stitch with which I fix the working thread, you see. I am currently embroidering on the corner of the product. I grab two threads of fabric, wrap them around, you see. Now I return to the side of the embroidered square. In this square, I will embroider all four sides. You see, I move by grabbing two threads of fabric each time. In all the squares of the track, I will only do three sides of the square. Look, I'm making the transition. I leave the fourth side unfinished. See how I secure the thread when sewing this stitch. I pull it to the wrong side, now I fasten the thread. I return to the front side. I'm taking a new thread. Pinning this thread doing a stitch, you see. Look, I embroidered all three sides. Now I'm going to embroider the fourth side, you see. Here I turn the product over and continue embroidering the fourth side. I grab two threads of fabric again , wrap them around and return. I do this for the entire product. I will make a corner. Here I go to embroider the fourth side of the other row. I finish embroidering the fourth side of the squares. I bring the thread to the wrong side. I will continue the embroidery with the same working thread. I need to go over here. I go from the wrong side to the right place. I pull the thread on the front side, you see. I turn the product to the front side. Now I perform a finishing seam on the inner part of the product from the front side . I do this seam in two steps. I do one part of the seam first. Now I'm doing the corner. I move from one row to another. At the same time, I tighten the stitches a little, a hole forms in me. See how I secure the thread when embroidering with this stitch. I bring the thread to the wrong side. I cut off the excess thread. I return to the front side. I make a stitch, with which I simultaneously fix the working thread and then continue the embroidery. Here I have completed the first part of this seam. Now look, I immediately go over, turn around and perform the mirror image of the second half of this seam. Now I'm doing a corner. I go to another line. Now I perform the same seam along the contour of the product from the outer part of the embroidery. I fasten the working thread and do stitches of different lengths in the same way. I also perform this seam in two steps. Now I'm doing the corner. I move to another row. I have completed the first piece of stitching. Now I mirror the second half of the seam, you see. I also make stitches of different lengths. Now I'm doing a corner. I finish embroidering the seam. I bring the working thread to the wrong side of the product. I stretch under the stitches. I fasten the thread. Look at the beautiful play of colors. I hope this video will give you many interesting creative ideas. Oksana Blaguta was with you, thank you for watching, make this Beauty 💖