Edmund Blair Leighton English Painter

Edmund Leighton
2 followers
Hi, I'm Tim McShane for the British Columbia Museums Association, here to talk about collections management.
Today, we're going to go over some techniques to construct a simple storage mount to ensure artifacts aren't damaged while they're in storage.
Just about every artifact will benefit from some consideration as to how it's being stored.
For larger pieces, such as furniture, this might be as simple as some Ethafoam pads underneath their feet.
For other pieces, tools, kitchenwares, it might be as simple as an Ethafoam lined shelf that they're placed upon.
The Ethafoam provides a barrier between the material of the shelf and the artifact.
This is particularly important dealing with wooden shelves, where they'll off-gas organic compounds from the wood itself or from the finish used on the shelf.
For metal shelves, the barrier will provide some protection against staining from rust should the environmental humidity rise too high.
Smaller, lighter pieces can often be jumbled together and can damage each other by constant abrading and knocking against each other.
This can be addressed by boxes or shelves that are lined with a layer of Ethafoam, and then a second layer of Ethafoam that has cutouts to contain specific artifacts.
While these boxes will take up more shelf space, they can be stacked, which in the long term will actually save you shelf space.
The boxes themselves also provide a handy surface to be able to write the accession numbers for the artifacts on the outside of them, so you never have to actually handle the artifacts.
And any time you can reduce handling an artifact, you're prolonging its life.
Particularly fragile pieces, such as these beaded necklaces, may require some additional support.
Here we have the necklaces tied down to a Coroplast backing board.
The board takes the strain off the filament that the beads are strung on, as that filament, whether it's a thread, sinew, no longer has to support the weight of the beads.
The way we have them tied down here maximizes the amount of space that we can use by having concentric necklaces on the same board.
And the board itself also provides a handy place to record the artifact's accession number, again limiting the amount that the artifact itself needs to be handled.
Awkward-shaped artifacts that may require more support include balls, large bowling balls.
They can be supported by a hollow cut into a chunk of Ethafoam that accommodates the curvature of the ball to keep it from rolling around while it's set on a shelf.
For other solutions, include a simple collar out of a strip of Ethafoam, just cut to length and notched, and that will support a ball as well.
Otherwise, even just a simple piece of tissue paper wrapped around into a bit of a nest, with the ends tucked under itself, and that will support the artifact as well.
This can be given some further stability by gluing the pieces down onto a piece of Coroplast, and really simplifies the carrying of the artifacts.
Storage mounts are often in close contact with artifacts for long periods of time, so it's important that they be made out of quality materials.
Undyed, unbleached acid-free tissue is a good material. It also makes a good barrier, a good covering for other materials that you might not be so sure about.
Brand name Ethafoam as well, really good, stable material that will last over the long period of time.
But you have to be careful, though, because not everything that looks like Ethafoam acts like Ethafoam.
You can also find some cheaper materials that are going to break down and become acidic.
This stuff just crumbles away. It has a really bad smell to it as well. It smells like vinegar.
And that's the acetate in the plastic breaking down and emitting acidic vapors, which are going to go into your artifacts.
I hope you found this quick look at constructing storage mounts helpful. Thanks for joining me.
