10 Tricks I Use On EVERY Pair of Custom Shoes!

Painting on objects ideas
124 followers
I've got 10 tricks to share with you today that I use on nearly every single pair of shoes that I
paint. Now, most of these are techniques that you can only learn after making plenty of mistakes.
However, you can learn from mine as I'll walk you through all the little tricks that I use
to paint something like these Air Force Ones. And if you stick around, there is one mind-blowingly
cool trick that we've never shared before. All right, after we have our shoes prepped,
let's talk about taping. First, I use ProTape's crepe paper on the sole. Then, when it comes to
applying tape where the midsole meets the upper, I use Green Scotch 2060 tape that I rip into tiny
pieces. This makes working around curves much easier. Apply tape across the entire panel,
with a bit hanging off the edge if you need to tape off any additional panels. Then,
using your X-Acto knife, cut around the furthest extent of the edge.
Use a palette knife to tuck the excess under the lip of the surrounding panel.
Keep this nearby because I'll have another use for it later as well. But for now,
let's get our paint ready. When it comes to airbrushing, nothing's more frustrating than
dealing with a clogged airbrush that brings your entire project to a dead halt. To prevent this,
take your Angelus paint and add just enough tooth in that you can run it through a mesh strainer to
catch any clumps. We can then store this mixture in one of these two-ounce squeeze bottles.
Furthermore, to keep things running smoothly, pour a generous amount of cleaning solution
into the cup whenever you switch colors or when you finish a layer and need to let it dry.
You can also clean the bottom with an old paintbrush. Once you're done,
leave a few drops of cleaner in the cup so that no paint can dry up.
My next trick comes in handy when you're trying to make those buttery smooth gradients
and will use the middle bar technique to do so. Take the two colors you're trying to blend
and pour a one-to-one ratio into your cup. Cover up the nozzle, pull back on the trigger,
and by using this backflow technique, you'll mix the colors together to form a new color.
This will really hide the seam where the two colors meet.
Then, if necessary, grab the original colors and apply them back on top of the middle bar
color to soften up the blend. To create textures or paint with airbrush stencils,
we'll use that same backflow technique once again. Grab some of the original colors and
mix in lighter or darker paints. This will create various tones that work perfectly to create those
soft, subtle textures. For this animal skin pattern, I'll mix some dark green into my
lighter green and backflow those together inside my airbrush cup. You can also use neutral colors
if you're aiming for a more dramatic effect. Let's check in on how our tape job held up.
Not bad. I'll need to paint the quarter panels and toe box black before we dive into our next trick.
When it comes to vinyl, I'm sure every one of us has experienced that sad reality of removing a
stencil and seeing that a ton of paint had leaked through. Now, you've created more work for yourself
and probably would have been better off not using a stencil at all. To prevent this, you must heat
the vinyl down thoroughly. Afterwards, seal the stencil by painting the color under the stencil
as your first coat. So if any paint does leak through, it'll be that first color on top. But
what if there are multiple colors like we have here? You can use neutral paint, which is colorless.
Combining this tip along with heating the stencil beforehand, and now when we peel that back, we have
nothing to fear. Regarding some of the tiny details that you need to paint on your shoes,
finding the perfect brush to do so always seems to be a challenge.
If you still haven't found your companion yet, try this toothpick technique. With this, you'll always
have one consistent rounded tip that won't fray on you. It's ideal for things like the Nike Air
stitching on the back tab. Speaking of tiny details, our project wouldn't be complete without
touching up all of those unpainted edges around our panels. To do this, grab the palette knife we
used earlier and tuck it directly behind whatever edge you're painting. Now you have a shield to
prevent paint from getting on other panels. This one truly broke my brain the first time I saw it.
The pinky finger brace and controlling your breathing are also important things to practice.
After you finish all the painting, it's usually time for any additional cleanup needed.
If you have dried up paint on the midsole, you can easily scrape that right off with your toothpick,
or if there's any of that dreaded leftover tape residue, grab a glue and residue eraser.
All right, now all of these work great if you're starting with an all-white pair of shoes,
but if you ever find yourself working on a colored surface, light gray will be your
best friend. It's a much better primer than white and you will use significantly fewer coats.
The last thing you want is to apply so much paint up to the point that the shoes are no
longer wearable. Listen, sneaker customization is really all about problem solving. The best
artists out there are the ones who can not only hide their mistakes, but also have the techniques
to help prevent them. Now, if you enjoyed seeing all of the tricks covered here today,
but are still wondering what to do for your next design, make sure you check out this video next.
All right, guys, everybody get out there and just create.
