Hong Kong-style Curry, with Beef Brisket

Hong Kong Cuisine
97 followers
Today, we wanted to show you how to make a classic at Hong Kong cha-tsan-ting – curry
beef brisket.
Now know that it's not like there's one master recipe for Hong Kong curry – different
restaurants will have their own versions.
That said, Hong Kong curry could kind of be conceptualized as a mix between British and
Thai curries.
The historical starting point does seem to be the British sort, but over the years more
Chinese spices were tossed in the mix and a bit of Southeast Asian flair was added in
the form of Hong Kong curry's distinctive hit of lemongrass and coconut cream.
But right.
To get started with Hong Kong style curry, you'll need Hong Kong style curry paste.
This stuff, or a brand like it, is generally what most cha-tsan-tings start off with, so
if you've got some handy, your life's easy.
But something tells me that this stuff wouldn't exactly be available at most local supermarkets
in the West, so unfortunately we gotta take the long route and reverse-engineer this stuff
from scratch.
Our homemade version here is basically a mix of this bottle and a couple other brands.
No guarantee that this is exactly how it's done in the factory or anything, but the taste
is on point in our opinion.
So this was the spice mix that we ended up settling on.
20 grams turmeric powder, 10 grams cumin powder, 4 grams chili powder, 2 grams star anise ground
till fine in a coffee or spice grinder, 2 grams licorice root also ground in a coffee
or spice grinder… this stuff can be a bit of a pain so just do the best you can, and
a gram each of ginger, cinnamon, white pepper, and clove powder.
Then of course, our requisite weird tough-to-source thing, 2 grams Chenpi trident-age tangerine
peel powder.
This ingredient is actually not even that common here in China, as you can see this
is actually for restaurant use, but the curry paste we were mimicking definitely had a kick
of this stuff.
If you can't find it, feel free to sub in orange peel powder or lemongrass powder instead,
and with the powders prepped, we can fry them.
So first, add eight tablespoons of peanut or vegetable oil to a pan and get that up
to smoke point, about 220 centigrade.
Now shut off the heat and let that cool down a bit.
Once you're looking at roughly 175 Celsius or so, toss in your powdered spices.
Give that a nice mix, and once that's cool enough to handle after about 30 minutes or
so, jar it up.
And with that, you've got yourself some Hong Kong-style curry paste.
Now for the beef.
I called this stuff brisket before because that's how it's usually translated, but
this is actually 650 grams of kongnan or beef plate.
We tested this with brisket though too, so feel free to go that route as well.
Before you do anything though, first take your plate or brisket and toss in some cool
water to soak for one hour.
After an hour of soaking, you should see that the water's extracted a lot of the myoglobin.
So drain that out, and add in two inches of smashed ginger, a sprig or two of scallion
tied in a knot, and a solid glug or about two tablespoons of liaojiu aka Shaoxing wine,
and an optional sprinkle or about a half tablespoon of coriander seed.
Lastly, toss in a tea bag if you feel like it… like, a bog-standard Lipton would be
completely fine.
Tea contains tannins which help tenderize the meat, but the effect is kinda subtle so
totally not obligatory.
Pour in enough water to completely submerge the beef, cover, and bring to a light boil.
Once it's at a boil then, take a look to see how much scum you're looking at.
There's no need to be too paranoid here because we won't be using this liquid, but
if you've got a lot of gunk like us there's no harm in a quick skim so it won't cling
to the beef when you take it out.
Then cover, turn your flame to the lowest heat your stove will go, and let that simmer
away for at least two hours.
Two hours later now, we'll shut off the heat and let that sit in the hot water for
at least thirty minutes.
Now, if you don't mind, in the mid-afternoon our new balcony here apparently has like the
same lighting situation as like the surface of Mercury and we stupidly haven't bought
a curtain yet, so forgive us for finishing the job inside.
So take out the beef and it should be tender enough that a chopstick can easily poke through.
Now just cut that into about inch and a half chunks, something about this size is more
or less perfect.
Then in a wok over a medium low flame, toss in your beef cubes and give those an oil-less
toast for about two minutes.
This'll tighten up the exterior of the beef as well as impart a bit of browning.
And set that aside.
Now for our curry base.
So to a pot with about a tablespoon of oil, first toss in half a red onion cut into chunks
and fry for about four minutes over a medium low flame until translucent like so.
Then add in two shallots and about four cloves of garlic both roughly chopped and fry for
another minute.
Lastly, add in two inches of chopped ginger and two stalks of sliced lemongrass.
Quick aside that when working with lemongrass we're really only looking for the bottom
white portion.
Don't waste that top bit though.
You can save it for tea, or alternatively infuse it into some gin.
But after a minute or so of frying those, we can go in with two tablespoons of our Hong
Kong curry paste, giving a quick mix before pouring, and an optional teaspoon of turmeric
for extra color.
Fry those together for another minute, then go in with 500 milliliters of hot boiled water.
Quick mix, then go in with two dried bay leaves, cover, and bring to a boil.
Then once it's at a boil, swap your flame to low, and let that simmer covered for ten
minutes.
So right, at this point, this curry does the very British-feeling thing of blending everything
together.
We've heard that some Hong Kong restaurants use immersion blenders these days, and obviously
feel free to do the Southeast Asian thing of just… thoroughly pounding your aromatics
first if you're so inclined.
We tested that too, and it's also tasty, it's just that blending got us to that classic
cha chan teng kind of consistency.
So remove the bay leaves, blend on low for about a minute, then on high for another,
and pour it back into the pot.
And with that, we've got our curry base.
So, now go back in with your beef chunks and bay leaves, but know that at this point you
could honestly really toss whatever you wanted in there… this could be the base for a lot
of dishes.
Bring that all to a light boil, then season with two teaspoons of salt and four teaspoons
of sugar, turn that down to a simmer, and let that cook covered for twenty minutes.
And finally, after that time, toss in two tablespoons of coconut cream, and let that
simmer uncovered until thickened to your liking.
For reference, we went about five minutes more because we like ours a bit on the thick
side.
Then just take that out, and serve alongside some white rice and a bit of blanched broccoli
for that classic cha chan teng vibe.
So Hong Kong curry, besides pork chop, you'll also see chicken cutlets, and if you've
been on the streets of Hong Kong, you've probably seen fish balls simmering in the
curry.
But that's a little bit different, so next week we'll be making fish balls and then
also show you how to make that.
So check out the Reddit link in the description box for a detailed recipe, big thank you for
everyone that's supporting us on Patreon, and of course, subscribe for more Chinese
cooking videos.
