How To Remove Door Panel 99-06 GMC Sierra

Auto Retech
2 followers
This video is brought to you by www.1AAuto.com, your source for quality replacement parts
and the best service on the Internet.
Hi, my name is Mike Green.
I want to help you save time and money repairing your vehicle.
I have 20 plus years experience restoring and repairing cars and trucks.
My company, 1A Auto, sells high quality replacement parts over the Internet.
In this video, I'll be showing you how to install these parts.
By the end of this video, you'll know how to install them and where to get them.
That's going to save you time and money.
Thank you and enjoy the video.
In this video, we'll be removing a door panel from a 2004 GMC Sierra.
You might want to remove the door panel if you want to replace a door handle.
You'll need to do it for a mirror, window regulator, window motor, and things like that.
For this repair, you'll need a medium size flat blade screwdriver, a pair of needle nose pliers,
a 7mm socket and driver, and a Torx driver, a small size.
It's a fairly easy operation, actually.
You start out by removing the little trim plate around the door lock.
It's actually the lock button itself.
You pry the back side out and then it pulls right out very lightly.
Then I'm wrapping my screwdriver in a rag to make sure I don't scratch the paint.
Then you just work it into that triangle and you pull those.
There are two clips and they actually pop pretty easily.
You can pull on it with your hand a little bit while you're prying with the screwdriver.
It'll come out.
Next, we're going to remove the trim plate around the door handle.
Again, on the back side of it, towards the rear of the car, just pry a little bit.
Then it comes right up around the door handle.
Next, I'm going to remove this little plastic pin at the front of the door.
It's just a little push-in pin.
You pry under it with a screwdriver first to get it going.
Then I've got a pair of needle nose pliers and I'm pulling it right out.
Next, I think there are three screws here.
That's a little trim piece.
I'm just pulling it off with my fingernails.
It's a little Torx screw, as you can see.
You need a smaller size Torx bit.
We're going to probably speed up the tape a little bit while I do this.
Next, there's a little screw right behind that door lock.
There it is, close up.
That's a 7mm.
Again, we'll speed up the tape a little bit.
Then there's one last screw up underneath the door pull.
Again, that's a 7mm.
We'll speed it up.
Now you actually just lift up on the panel and it comes out.
Then you're going to reach in behind.
This is the lower light.
That's the courtesy light that pulls out.
That's in the lower rear corner.
Then I'll move the camera up a little bit.
This is the back side of your window switch and door lock switch.
This truck has power door locks, power windows, and a power mirror.
There's actually three connectors.
I believe there's actually just four.
The first couple come, just push your thumb towards the door panel.
There's a little lock and then they'll pull out.
The next one, we're going to do a close up.
This is the bottom side.
You're looking at it opposite of if you're looking over it.
There's this little gray lever.
Get those wires out of the way.
There's a lock for that lever.
You press down and then that lever rotates forward.
You can see now I'm actually doing it on the panel.
In a second, you'll see the lever kind of pressing up on there.
The lever pulls forward.
You can see the lever right there.
The next one also has a tooth.
Then you unhook your speaker here.
I actually kind of pull it off of the door panel.
It just kind of slides onto the door panel.
I'll get it with two hands.
Again, it's just a little locking connector.
Once you've got that done, your door panel is free and you can continue on with your work.
This video was brought to you by www.1AAuto.com.
Your source for quality replacement parts and the best service on the Internet.
You can call us toll free, 888-844-3393.
We are the company that's there for you on the Internet and in person.
Thank you very much.
