Ski Poles | How Do They Do It? | Olympic Winter Games

Process A-Z
9 followers
3 Video Views·Oct 9, 2024
Huge machines churn up the sand and water
and transfer the resulting sludge to a wet mill,
where they extract the heavier black particles
of titanium ore by allowing them
to sink to the bottom of the mix.
An electrostatic separator is then used
to remove other impurities.
But the titanium-bearing ores have a maximum purity
of just 60%, and often much less.
To be turned into a metal suitable for ski poles,
they now need to be refined.
Here in Henderson, Nevada, specialist firm Timmert
produce 20,000 tons of titanium products every year.
First off, they have to turn
the solid titanium ore into a gas.
They do this by heating the ore to 1,000 degrees Celsius
and adding chlorine gas,
which creates titanium tetrachloride.
The mix cools, it becomes liquid,
and now they have to separate the titanium back out.
This is the really expensive part of the process,
because to separate the titanium and chlorine,
they have to introduce another expensive metal, magnesium.
They then heat this mix
to between 800 and 900 degrees Celsius for four days,
which separates out the titanium.
Then the whole mix is craned over to another furnace
where the magnesium chloride is removed.
Phew.
What's left is this, pure titanium, but full of holes.
So it's called titanium sponge.
The problem now is to turn this sponge
into a usable chunk of metal.
The first step is to break the sponge up into smaller pieces.
That requires some heavy crushing power.
Then 150 kilograms of the crushed granules
are poured into a tube called a compacting press.
A plunger is then forced down the tube,
and using 6,500 tons of pressure,
it squeezes all of the metal granules
into a half-round compact block.
These compacts are then welded together into a round form
and melted down in a vacuum to turn them into an ingot.
Now they just need to soften the metal up
so it can be shaped into something useful.
So the blocks are heated in a furnace
to a phenomenal 1,168 degrees Celsius
until they become malleable.
These glowing metal sections are then removed
from the furnace by a series of robotic pincers
and fed into an absolutely monstrous mechanical press.
This fearsome beast uses thousands of tons of force
to slowly compress the metal rod blow by blow,
and after hours of concentrated compression
followed by further heating, cutting, and polishing,
the finished titanium is ready to ship out.
