505 Video Views·Oct 6, 2024 #DadHowDoI #RobKenney #HowTo How to Change a Car Battery
Remove the negative cable first
Remove the positive cable second
Remove the mount
Remove the battery
Put in the new battery
Replace the mount
Remove the plastic sleeve from the positive post
Replace the positive cable
Remove the plastic sleeve from the negative post
Replace the negative cable
DONE!
Here is a link to my Amazon Affiliate store;
https://amzn.to/3TUvqKX
If you want to help support my mission of encouraging and empowering people,
please visit my Amazon store. When you buy things from my store that you would normally purchase through Amazon anyway, a small percentage goes to support my cause. I have also included items that I can feel good about recommending.
Blessings,
Dad
Subscribe: https://rb.gy/rdm2sl | Make sure to enable ALL push notifications!
Watch the latest videos: https://rb.gy/rdm2sl
Watch More Dad how do I?:
Dad Chats: https://rb.gy/rdm2sl
Tool Tuesday: https://rb.gy/rdm2sl
Most Popular: https://rb.gy/rdm2sl
Follow Dad how do I?:
TikTok: https://www.tiktok.com/@therealdadhowdoi?lang=en
Facebook: https://www.facebook.com/dadhowdoi
Instagram: https://www.instagram.com/dadhowdoi/
Affiliate link to my book;
My Book: https://amzn.to/3idKKzq
About Dad How Do I: Welcome to the official "Dad, how do I?" YouTube Channel! Here you will find "How To" videos by a dad who has raised 2 adults (and we still talk). I will do my best to provide useful , practical content to many basic tasks that everyone should know how to do. On this channel, you will find a variety of content like How To's, Story times, Dad Chats, and more! Make sure to subscribe and enable ALL notifications!
#DadHowDoI #RobKenney #HowTo
Disclaimer:
This video is produced by “Dad, how do I?” and it is provided for informational, educational, entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. “Dad, how do I?” does not make any claims of the safety of the projects, techniques, or resources listed on this site including this video, and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes or vehicles, they are doing it at their own risk and “Dad, how do I?” cannot be held liable if they cause any damage to their homes or vehicles. “Dad, how do I?” assumes no liability for property damage or personal injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Dad, how do I?” recommends safe practices when working with tools seen or implied in this or any other video on my channel. Due to factors beyond the control of “Dad, how do I?“, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Dad, how do I?”.
hey kids so today I'm going to show you
how to change a car battery I did this
on my van back in 2020 and I'm just
going to show you how to do it on my
2009 Hyundai Sonata it's going to be
similar on most cars but I just want to
walk you through it to give you the
confidence to be able to do it um cuz
recently I had a check engine light come
on in this vehicle we took it in and
they told us that our battery could be
um going out soon and so we thought
we'll just go ahead and switch it out I
actually got nine years out of this
battery the um before I said that they'd
last between 5 and 12 I think 12 is
stretching it and it really depends on
your climate we have a fairly mild
climate but we will be heading into
winter I thought let me go ahead and
change it but I did get nine years out
of it so uh pretty pretty happy with
that um but first I have a dad joke for
you did you hear about the robot that
went on a crime spree yeah his batteries
ran out but the police are refusing to
charge him so anyway let's get started
first thing you want want to do is
locate the positive and the negative you
want to disconnect the negative the
positive will be red or have a plus sign
on it and the negative will be black or
have nothing on it or a minus symbol so
you want to disconnect that one
first I'm using a 10 mm socket which is
pretty common for this particular task
now we're going to disconnect the
positive now that the negatives
disconnected so we just disconnect the
positive
my battery had this insulating cover
that just was around it maybe that
helped with the life of the battery I'm
not
[Music]
sure your battery will be held in place
somehow and so this has got this little
tie down down at the bottom here see
that so there's just a little bolt on it
that I'm going to have to loosen to lift
that out of there to get down in there I
actually needed two extensions so I have
a shorter extension and a longer
extension to be able to get all the way
down there and then I just loosen that
up this was a 12 mm socket for that
bolt and once you loosen it with the
wrench you can just spin it by hand to
to remove it the rest of the way
and then I pull that clip out of there
and just make sure you put this
someplace where you can find it right
it's easy to get excited and get into
the job and then you forget where you
put the stuff so set it somewhere
obvious so you know where to find it
when you need to put it
back I like the design of this tie down
you just slide the battery forward then
so it's clipped on the back just by you
sliding it back there and then so you
slide it forward and pull it
out so you can see see it's a little bit
dirty as you can imagine over the years
so I'm just going to go ahead and vacuum
that out there's different debris that's
built up over the over the years just to
get that out there and start off with a
nice clean bottom you know if you don't
have a vacuum I guess it wouldn't be the
end of the world if you left that there
but you may as well since you have that
battery out of there go ahead and clean
it
up now I'm going to go ahead and clean
up these leads here just to make sure
that there's a good connection onto my
terminals so may as well since you have
it here right so there's this wire brush
that's specifically made for this and
you can clean it up good so I'm going to
do that to both the positive side and
the negative
side all right before we put our battery
in let's just take a look at things make
sure we're ready to go and we're just
going to go ahead and put the battery
back in and we're just going to go in
reverse order of how we removed it so
we'll go ahead and get the battery up
here you can see there's covers on the
battery terminals right so you're going
to end up removing those I have seen
memes showing those things still on and
so you got to make sure to remove those
but we don't need to remove them just
yet let's get the battery in place
first make sure you're putting the
battery back in the correct way right
you're going ahead and have the positive
side on the left side just like you
removed it and the negative side on the
right side I'm just checking to make
sure it fits but we still need to
actually put that um insulator back on
so we need to have that make sure you
have the the cutout out on the bottom
right so that allows for those clips
that are going to hold the battery in
that's why those cutouts are there and
then there's a cutout on that other side
I'm not sure why that's there maybe to
make room for the the positive side but
you don't really need that so anyway so
we're going to slip that down and then
we can go ahead and slide it
back okay so now it's in place and then
we just got to put that other clip back
in we haven't connected anything yet
right we're just going to go ahead and
you see your hole down there so you know
what you're doing put that clip down in
there cuz you're going to have to kind
of feel for it as you're putting the
bolt back in you want to kind of feel
for that bottom hole it might take a
little bit to get it started and then
once you get it started you can go ahead
and use your ratchet and tighten it all
the way down
[Music]
okay so we want to connect the positive
first so your red one right there you
got to remove that Red Cap let's remove
that and then we'll go ahead and connect
the positive right just the opposite of
how we removed it right when we removed
it we removed the negative and we we
removed the positive second now we're
putting the positive back on and then we
put the negative on
last make sure it's seated down in there
good and this one has a cap that might
fall off like that that's okay just snap
it back on and then it'll cover back
over the top so but before we do that we
want to just tighten it down so make
sure it's a good connection there right
and then tighten it back up don't
overtighten this but you want to make
sure it's snug so that it
holds now we're going to attach the
negative you got to just make sure to
remove that plastic cover first right
you don't want to leave that on
otherwise you won't have good
connections you got to remove that and
then we're going to go ahead and attach
it and basically what we did with the
positive side we're going to put that
down in there and then tighten it up
good and that's all there is to
it so they wanted to charge us $235
that included labor and the battery to
replace the battery I was able to buy
this battery at Costco for
$115 those are prices without tax and
remember you have to do the core charge
so you you go there you buy the battery
if you don't have the old battery with
you you have to pay a core charge and it
was a core charge of
$15 and then um I didn't have the
battery with me so I paid that core
charge and then I um once I changed the
battery you got to bring it back and
then you get your $15 back back that's
all that core charge is for you so all
right all right I hope that was helpful
for you um yeah I think you could
probably handle this yourself you just
need a few tools to be able to to get
the job done look at it beforehand to
see if it's something you think you can
tackle before you bite it off or if you
don't want to mess with it then you just
got to pay a little extra so anyway I
thought that would just be a helpful
video for you as a refresher and you can
always go back to my other one to see
how it was done on my van um and I'll
link that um to this video so all right
thanks for watching and God bless you