Contactor और Timer के Terminal No. 13, 14 & 15, 16, 17 का सही मतलब क्या होता है आज यह जान लीजिये

Electrical Technician
42 followers
2 Video Views·Oct 7, 2024
Friends, we all electricians always work on this type of contactor, but there is a detail written on the contactor,
like you will see here 13 and here 14 is written.
Now you do not know what the meaning of this is.
If there is 23 and 24 written on any of your contactors, what does that mean?
Similarly, if there is 21 and 22 written on your contactor, what does that mean?
If you do not know, then I am going to tell you through this class.
As you know, the power terminal here, for the power terminal, we mostly use L1, L2, L3 and T1, T2, T3 for the output power supply.
Similarly, you also know that the power terminal, like 1, 2, 3, this power terminal, the power supply that comes on it,
here we denote it with 1 number terminal, 3 number terminal and 5 number terminal.
For the output terminal, we use 2, 4, 6 here.
Similarly, if you look at the top of any contactor, then there you get to see 13 and 14.
In this way, the number is written.
I will show you here.
If 13 and 14 numbers are written, then these two contacts will be anode contacts.
This is the numbering of anode contacts.
You will also see here that this contactor is not written here.
Anode contact is not written here.
Only 13 and 14 are written here.
So if you look at the terminal number 13 and 14 on any contactor, then it will mean that this contact is anode contact.
Now after this, the number of NC contact is 21 and 22.
If you can see 21 and 22 somewhere, then you will understand that the contact is NC contact.
Now suppose you don't get 21 and 22 here.
You get 31 and 32 here.
In the same way, you get to see 43 and 44 here.
Now you tell me here that these two contacts are anode or NC and which contact is this?
You have to tell me here.
Answer this quickly by commenting in the comment box.
See friends, if you get a number like this on any contactor, then there is no need to see the first digit.
You just look at the second digit.
For example, here is 1 and 2.
You will know that the contact here is anode or NC.
See, our anode contact is the last digit of the anode contact, 3 and 4.
It means that if you can see 3 and 4 here, then it will be your anode contact.
I am talking about the last digit, not the first digit.
You just have to look at the second digit.
If the second digit is 3 and 4, then it becomes our anode contact.
You have understood the anode contact.
In the same way, if your last digit is 1 and 2, then it will be our NC contact.
Now a question will arise in your mind.
What is the meaning of the first digit here?
It means the contact number.
If this is the first contact, then its number is 1.
If this is the second contact, then its number is 2.
If this is not A1, then it is not A2.
If this is the second anode contact, then its numbering is 33.
For anode, it will be 3 at the end and 4 at the end.
Why is it 3 here?
Because this is the contact of the third number.
First, second, third.
Since it is the contact of the third number, it is 33 here and 34 here.
Now comes the timer.
The numbering of the timer is also a standard.
If you see here, it is A1, A2, 25, 26, 28, 15, 16, 18.
Now what does this mean?
How will you identify this contact?
Which contact is anode?
Which contact is NC?
Which contact is common?
Before telling you that, I would like to tell you that if you work in the electrical field,
if you do not have the knowledge of electrical work,
if you want to gain good knowledge from zero level,
then our course is for this.
Like the most basic course is 100% practical course of dual starter, reverse forward and star delta starter.
The fee of this course is only 200 rupees.
I give you such good knowledge for 200 rupees,
so that if you go to work in the industry,
then the knowledge you should have at the basic level,
which no one tells you quickly,
to gain that knowledge, you have to work for at least 1-2 years,
then you get the knowledge.
I am going to give you that knowledge for only 200 rupees.
And with the help of 200 rupees, you will learn everything.
In which you will get to know what is dual starter?
How does it work?
How will you do wiring?
How will you do troubleshooting?
In the same way, I will tell you the wiring troubleshooting of the reverse forward starter.
In the same way, I will tell you the wiring troubleshooting of the star delta starter.
You will get to learn everything there.
So if you want to join this course,
then you will get the link of this course in the description.
You can join by clicking there.
Apart from this, we have one more course,
which is electrical wiring master course.
This is the most important for you.
If you have the knowledge of dual starter, reverse forward starter,
then you should take this course.
I will tell you what you will learn in this course.
Look, you are working in the industry at this time.
There are a lot of modifications and wiring in the industry,
where you get confused somewhere.
Like when I was working in the industry,
I had an electrical panel.
There I was told to put a timer in the panel.
After putting the timer,
we have to turn off the starter of the panel through the timer.
We have to turn off the motor in half an hour.
To turn off the motor in half an hour,
I got the timer.
I used the timer on delay there.
But I didn't know how to connect it there.
Then I asked one person.
He told me to supply power to the A1 and A2 terminals of the timer to connect.
The timer will start working.
I connected it.
After connecting,
I found out how to use the NONC contact of the timer.
I got confused there again.
Then I asked him to tell me whether I should use NONC or NONC.
He told me to use NONC.
I used NONC.
After using NONC, I found out that it was not working.
Then he told me what to do and which contact to use.
Then he told me to use NONC contact.
Then I got confused where to use the power supply.
How to supply power to NONC contact and NONC contact to NONC contact.
So, if you have a doubt in your mind,
then you should join our course, Electrical Wiring Master Course.
This course depends on the topic itself.
Where you have to use which device.
How you have to wire it.
Whether you have to use NONC or NONC contact.
If you know that you have to use NONC contact,
then how you have to wire it.
From where you have to supply power to NONC contact.
So that our logic works according to that logic.
You will learn all these things through this course.
If you are an electrical engineer or electrician,
then you should have knowledge of BFD.
In our BFD course, we tell you how to wire BFD.
How you have to troubleshoot BFD.
How you have to program BFD.
How you have to operate BFD using PLC command.
There is a PLC in this BFD.
How you have to program PLC.
Apart from this, if you want to operate BFD using HMI.
Then how you have to operate it.
This is told through our course.
After this comes our course on Electrical Drawing.
If you don't know how to read electrical drawing.
Then we have a course for that.
Where we teach you how to read electrical drawing.
Along with that, how you have to troubleshoot using drawing.
They also explain to you in detail.
So this course is also very important for you.
If you do troubleshooting.
Means if you are working in maintenance field.
Then this course is very important for you.
After this comes our PLC programming course.
If you want to learn PLC programming.
Then you can learn by joining this course.
All the courses I have told you.
You will get the link of all these courses in the description.
You can join by clicking there.
Whichever course you want to join.
If you have any doubt.
If you need any suggestion.
Then my mobile number is.
8989044606
You can contact me on this mobile number.
You can talk to me directly.
Now friends, let's talk about the timer.
The numbering given in that timer.
What does it mean?
As you can see, the timer I have.
In this timer.
Here is the terminal number 15.
Here 26, 25, A1, A2, 16, 18 and 28.
Such numbers are given here.
By the way, I have already written the meaning of all these numbers here.
But still I will give you a little explanation here.
As you can see.
The timer here.
The A1 and A2 terminals in this timer.
I will write to you.
The A1 and A2 terminals are always the terminal of the coil.
Means if you want to operate this timer.
If you want to count the time of the timer.
Then you have to provide power supply on this contact.
So the terminal of the coil is A1 and A2.
We provide phase supply on A1.
We provide neutral supply on A2.
Then comes the terminal number 15 and 25 here.
As I told you in the last class.
If you have a terminal of the same number here.
Like 15 and 25.
So the first terminal in it.
The first number.
It tells you what is your contact number here.
So this is contact number 1.
So here 25 means contact number 2.
This means that in this timer.
There are two contacts.
Means you will get two anodes here.
So the terminal number 15 of this timer.
The first digit here.
Means this 1 tells the terminal number.
And 5 will tell which contact is here.
As you will see in this timer.
There is number 5 here.
So the number 5 means common.
This is common.
Similarly, there is 5 here.
Means this terminal number 25.
This is terminal number 15.
This is also our common terminal.
Then comes our terminal number 16.
And terminal number 26.
So if the last digit is 6 here.
If the last digit is 6 here.
Then you understand.
This contact is our NC contact.
Which was the last digit in your contactor?
1 and 2.
If you see 1 and 2 in the contactor.
Then understand that it is NC contact.
And in the timer here.
You will see 6 here.
6 means NC contact.
Then comes 8 here.
If you see 18, 28 or even 38 here.
Then you have to see the last digit.
Here is 8.
8 means NC contact.
So we denote NC contact with terminal number 8.
How do we denote in the contactor?
In the contactor, you will get terminal number 3 and 4.
If you see 3 and 4.
Then it becomes our NC contact.
Okay friends.
Friends, before ending the video.
I would like to tell you.
If you are our course.
Like our PLC programming course.
Our how to read electrical panel drawing course.
If you want to join this course.
Then for this.
Our mobile number is given here.
By contacting this mobile number.
You can ask for the course link.
Or the video in the description of this video.
I have already provided the link.
By clicking there.
You can directly join the course.
If you need any kind of help in joining the course.
Then contact this number directly.
Whatever help will be made.
I will help you.
I hope you liked today's video.
Thank you very much for watching this video.
