Lecture 33 : WPCBs recycling: Pyrometallurgical processes

IIT Kanpur July 201
20 followers
2 Video Views·Oct 4, 2024
Greetings, I welcome you all to the new lecture of this course, where now we will be discussing
on the pyrometallurgical processes of WPCB recycling. Now, we had very recently discussed
the importance of pretreatment and how ECs are to be removed from the WPCBs and we have
also discussed the delamination. Now, it becomes very important that after delamination we
must have a very well defined route for recycling the PCBs. One of the ways that by default
we can just think of is basically we go into the pyrometallurgical process. Suppose that
we have a large stock of WPCBs that we can easily recycle. Now, that stock can be directly
charged in a suitable furnace and we can go ahead for the pyrolysis or let us say metal
recovery. Now, one of the ways that one should be thinking
of for metal recovery is that we can do it in the conventional way or we can have some
other modifications during the process. So, that we are able to tap out maximum from the
pyrometallurgical operations that we do. Now, there are lot many variations to pyrometallurgical
operations. Some of the furnaces can be rotated, some of the environments that are present
inside the furnaces can be controlled. So, inert atmosphere or not inert atmosphere,
what is the process parameter for a given furnace that governs what is going to be the
end result of the pyrolysis operation. Now, we can have extensive discussions on lot many
operations that have been explored and are being implemented at different levels, but
presently we are going to concentrate on some of the processes that generate in general
good output. And of course, it is fair enough to assume that in case we are going to for
conventional processes, we can end up with metal master alloys.
Now, that may be a good product, but at then after that we will have to think about the
refining of the master alloy and further separation of metals, if we want to go into
that route. And of course, there is the generation of slag, when the slag recycling and dust
here the process dust that is generated effluent dust that has to be processed separately.
So, metal extraction is a challenge and the generation of slag is also a problem, which
means one has to invest on these fronts as well. So, we are going to discuss pyrometallurgical
processes that are oriented towards maximum metal recovery along with other materials
as well. So, let us go and we know that we have been discussing extensively on WPCB.
So, the composition is already known to us, it is like 30 to 40 percent metal is present,
we have nearly 30 percent of polymers and we can have 30 to 40 percent of oxides refractories
basically. These are basically oxides and we also know that nearly from a general perspective
we know that 3 to 7 percent of total e waste is basically WPCB, which means it is a very
big contribution given the gigantic quantity of e waste that we are producing per year.
And considering the case of India, we have this means this is the quantity 4137000 metric
tons. So, this is basically 1000 metric tons and this value is very large and this is just
a very recent data it is in 2022 and we are talking about India. So, this is the e waste
generation in our country and we know that WPCBs have lead, chromium, mercury, cadmium.
Of course, these are present in smaller quantities, but nonetheless these are present and these
are hazardous. Therefore, recycling becomes so important, directly charging it in a furnace
may not be a very attractive option because of the generation of gases. We are looking
at just in the previous classes we had discussed that the epoxy resins are present, flame retardants
are present. These are materials that lead to the generation of hazardous gases and if
these gases are coming in contact with humans, then it can lead to lots of repercussions
and health hazards. So, one has to really think how we are going
to go about the whole pyrolysis operation. What are the important pretreatments? Important
pretreatments specifically for pyrometallurgical operations. In such a case, we can go for
crushing or shredding. Of course, why are we doing this because we want to reduce the
particle size. Then, we can have screens. Again, why we wish to have separation of particles
on basis of size and shapes. Then, we have magnetic properties. We are using what? We
are using magnetic separators or drum separators. Then, we have electrostatic separators, electrostatic
properties. So, we know that we are going to have eddy current separators. Similarly,
following that we have density separations. So, we can have fluidized bed or cyclones
hydrocyclones and finally, we can have surface properties. So, we go for fractal addition.
So, when we have such long chain of important pretreatments, it is not necessary. It just
adds to the quality of feed. So, one can totally bypass these types of operations and one can
just directly charge the PCB assembly even without delamination into a furnace. That
will do what? That will just lead to the melting of all of the components. We have let us say
appropriate temperatures. We have good slagging materials. Slagging materials means we have
good fluxes. Just melt the whole PCB itself. We will generate lots of gases. The slag composition
is going to be very complex because we are going to have lot many polymers and different
materials coming into picture. The product that we will get may not be of our desired
composition. So, removal of components and pretreatment
helps us to make the metal fraction more concentrated, more oriented. So, the raw feed is of basically
our own choice. We are able to design our raw feed for higher metal recovery. This means
material control, material properties help in designing feed of the process and this
leads to what? Improved metal recovery. Now, what exactly are the types of pyrolysis?
What are the types of pyrolysis operations? We have and of course, pyrolysis operations
means what are the operations in pyrometallurgy that have controlled atmosphere for good material
recovery because we do not want the hazardous gas to generate thermo gravimetric analyzer
in the reactor. Right now, we are just describing different
types of facilities that can help in the pyrolysis. We see that thermo gravimetric analyzer has
poor mixing. You can have good control over temperature, but you will get poor mixing
of products. Fluidized bed reactor is basically continuous operation, low operation cost and
poor temperature control. Then, we have batch reactor. It gives us high efficiency, high
labor, but it has high labor cost because one has to remove the material and recharge
the furnace. Then, there is the problem of variation of batch to batch output. This is
very crucial because we do not know what we are charging and it becomes very difficult
to really be very sure about what is the overall concentration that we will be getting from
up single batch to the next batch. This is a very big of a challenge.
So, in microwave, we know that electricity requirement is important parameter because
it is not just heating, it is also providing the microwave input. We have good control,
easy control and good heat transfer, but the mass control is difficult to handle. So, difficult
to get mass control in the process. So, we have different types of pyrolysis operations
and we see that for every reactor that we have, let us say fixed bed or a batch reactor
or we can have other heating mechanisms also and we can have microwave or we just go for
a very controlled small experimental setup. Each reactor itself has its own advantages
and disadvantages. What is it that we wish to optimize? It is dependent upon the reactor
itself. So, both batch reactor and continuous reactors can have their own nuances. One can
have different types of advantages and disadvantages associated with it.
Now, we will go ahead and see what are the important parameters. Pyrolysis process parameters
and we know that typically speaking, we have 300 to 800 degree Celsius. Of course, this
temperature, outer temperature range can go to as we had discussed in the previous class,
it could go to up to around 1300 degree Celsius, but generally speaking, it can be up to 300
to 800 degree Celsius and this is the temperature range. What exactly are we looking inside?
We have important chemical reactions. What are the chemical reactions that happen? So,
we have dehydration, debromination and dehydrogenation. So, dehydration and dehydrogenation both are
present in the pyrolysis of WPCBs. What really happens is basically, smaller molecules are
produced. Smaller molecules are produced and it leads to generation of heterogeneous mixture.
One just might wonder, what type of mixture are we talking of? This mixture, the composition
of this mixture, we really cannot predict. It depends upon what we have fed in what quantity
and what was the initial composition of whatever we have fed and then, we let us say operated
at given operation parameters and then, we get to see the output. This heterogeneous
mixture is what we get after the pyrolysis. So, gaseous products, the oil, pyrolysis oil
and char, we separate that out and there is this heterogeneous mixture, which contains
metal and other fractions. So, we cannot really pinpoint, this is going
to be the composition. It again depends upon the feed and how we process it. So, the heterogeneous
mixture, which is basically having the metal is produced by gases and char. Of course,
we are also considering oil inside. So, gases, pyrolysis oil, pyrolysis oil and char. What
are the parameters? So, this is what is general outline. This is basically the outline of
operation, but what are the parameters? So, when we look at parameters, we have temperature,
then we have power and heating rate and then, we have particle size. When we talk about
temperature, generally speaking high temperature, we know the temperature range itself. So,
high temperature generally means good reaction rate and decomposition of WPCDs.
By decomposition of WPCD means, we are going to get heterogeneous mixture, char, pyrolysis
oil and gases. The changes in temperature does not affect the mass of residue, the heterogeneous
mixture itself much. It does not affect the mass of the residue much, but it provides,
we should say promotes, not just provides, provides an opportunity, promotes the conversion
of volatile materials to volatiles or volatile materials to gases. So, high temperature can
lead to this. It really does not affect the mass. Now, when we talk about power, we can
have let us say microwave, if we are using microwave. So, microwave power can lead to,
if we are increasing this, we are basically leading to higher reaction rate, higher heating
rate and higher heating rate means, everything is actually interconnected. Higher heating
rate means early decomposition. It starts early, it ends early and higher decomposition
rate. So, not just early, it becomes quicker. Finally, we have the particle size. Now, this
is something that we can debate, powdered particles. So, suppose if somebody has used
powdered PCB, it leads to higher gas generation. Whereas, if the particle size is larger, which
means coarser particles, larger means coarser particles. So, we can have higher pyrolysis
oil generation, which means that it is not complete, which indirectly means that we have
to go for incomplete pyrolysis. So, if we are using powdered particles, we
can have gas generation. We have larger particles, we can have oil generation. Now, what exactly
is it that we wish to perform is totally dependent on what is the product that we wish to make.
Do we want gas or do we want pyrolysis oil? What is it that we wish to generate and in
what quantities? That will decide whether we want powdered particles or somewhat larger
PCB particles. Now, there are some advanced processes also, which we will be discussing.
So, we have catalytic pyrolysis, wherein we are going to use catalysts. We have co-pyrolysis,
wherein we can have different materials coming into picture along with the PCB itself. And
then, we have molten salt pyrolysis, wherein we are going to use molten salt. So, when
we look out for catalytic pyrolysis, we have use of zeolites and metals and metal compounds,
metals and metal oxides. So, it is zeolites and metals and metal oxides. So, what are
the common examples? We can have MgO, CaO and then ZSM5. ZSM5 is basically zeolite and
then, we can also have copper and iron. These are basically the catalysis, catalysts that
have been used for the pyrolysis. And then, what are the properties that we get? So, we
have generation of lower pyrolysis soil. We have reduction of time, pyrolysis time and
activation energy. So, it becomes easier and then, we have bromides converted to bromine
and or hydrogen bromide. So, when we think of co-pyrolysis, it is a bit different. So,
when we are using two or more materials for pyrolysis, it is called co-pyrolysis. So,
we can have let us say, use of Chinese for sawdust or rice husk or red mud and people
have been exploring lot many different materials. So, not just these and if we are doing this
with the WPCBs, we are going to get some different output. We have high quality, high
value pyrolysis oil which can be used as a fuel. So, and the bromine goes in char, bromine
fraction in char. So, char that is produced as the bromine. Now, when we look at salts,
generally speaking salt bath can have of course, this is just a typical example that we are
looking at Li 2 C O 3, Na 2 C O 3 and K 2 C O 3. So, it could be having all of equimolar
concentration. So, 33 percent each, if this bath is used then we are, we can also have
an advantage of let us say, bromine conversion 99 percent bromine in salt bath and basically
it is alkaline bromine, alkaline metal bromides and we have recovery of 95 percent copper.
So, metal recovery is also described. Now, when we look at the overall in general
PCB recycling, we must look at energy and material flows. These are very important and
it helps us in understanding how material is extracted when we go into pyrometallurgical
route of recycling. A generalized diagram we are trying to draw here. So, let us have
WPCBs and we had our operations. So, we did pyrolysis and we also had energy conversion.
What we get is thin gases, liquid products and then we have solid residues, but these
gases can be treated as fuels. We have fuel and this is basically energy usage. So, one
path is basically wherein we are just going from pyrolysis to gases and then to gases
to energy usage. If we are really not interested in that, then we can go for material path.
So, when we look at material path, we have liquid products and liquid products basically
means chemical materials. One has to of course, purify it and get different types of output
from it and we also have solid residue. We will now discuss what we are looking at when
we think of material output. So, separately we have solids and then we have liquids and
again we are still discussing material flow. So, we have metal fractions and we have non
metal fractions and in liquids, we have the liquid generated products, we have the chemical
materials. We need to go for debromination and of course, the purification and we get
the final chemical products. It follows a very good streamline that we are able to recover
lots of products. Now, in the case of solids, when we look at
metal fraction and non metal fractions, we have non metal fractions is basically synthetic
products and metal fractions are basically one has to purify and get the overall output
finally, recovery. Now, when we think of pyrolysis liquids, liquid oil, we get that this product
is not very good a fuel for incinerations and it means that one has to have lot many
further facilities because the presence of particulate matter in this output makes it
difficult to use in a general as a general fuel. So, when we think of pyrolysis oil,
we can get key components like phenol and isopropyl, but the key challenge is generation
of pollutants which makes this whole process a bit of a typical health hazard kind of situation.
So, one has to think around these pyrolysis products if they wish to reutilize them as
fuels. So, we have seen that in this class that lot many processes are available in pyrometallurgy
that give us wide range of alternatives and products and of course, one has to think about
refining the final metal products to get the desired composition and one has to go
into other routes in combination with pyrometallurgy to get the final output. We will discuss in
the upcoming classes. Thank you.
