Rebuilding the Meissen Fountain | Conservation | V&A

Ancient Artifacts Channel
16 followers
We are extremely delighted to have this piece as one of the centrepieces of our new
Europe 1600 to 1815 galleries because it's such a spectacular ensemble. It really gives you an
idea of baroque garden sculpture and it's I think now the largest original piece of
Meissen sculpture that exists anywhere. It is a wonderful piece to have on display here.
The Meissen fountain was originally acquired by the museum in 1870
and at that time it was described as much shattered so when we first tried to sort of
put it together we sort of immediately saw that we had lots of pieces but
there were also quite a few pieces that we probably didn't have.
A lot of these pieces have been in store since 1870. Many of the pieces that we had were
just damaged, they were broken in bits, sometimes there were little bits missing,
so we restored many pieces that were damaged but of course there were other
bits that were completely missing and for those we had to go the way of reproducing the parts.
We did a lot of research into the background of the fountain and where it first led us was to a
garden in Dresden just outside of the centre and that was actually the summer palace of Count
Heinrich von Brühl. Mainly a big garden and a tiny little palace to it but at the end of the
garden he had this huge sculptural fountain created. We also started to do research in
the archives in Dresden and at the factory in Meissen and there we actually read in the earliest
reports that von Brühl himself asked Meissen to make a smaller version of his garden sculpture
in porcelain. We had a real breakthrough at that first visit to Dresden when we discovered that
they had actually a 19th century copy of this fountain so we worked together with the people
there and we were allowed to take scans of all the pieces that we were missing here and so we
could use those to start reproduce the pieces. We decided we wanted to make the replacement parts
for this fountain in porcelain but the main problem with working with porcelain is that
it shrinks quite a bit so whatever you make as a model has to be a lot bigger than what you end up
with. So then we ended up with all these enlarged models and then we had to translate them into real
physical models and there were two techniques that we used for that. For the fine detail in
the two water wheels for instance we used 3D printing techniques which gives a very fine
resolution but it's very very expensive the material that you actually use. So for all the
bigger rock work and wall work we used a computer steered routing machine.
We went to Stoke-on-Trent and we worked with a small workshop that specializes in making
plaster moulds for the ceramic industry and we had them make plaster multi-part moulds for each
of the parts. Those were taken to London again and then at the RCA and used the traditional techniques
of pressing slabs of clay into those moulds and fitting them together to make the porcelain parts.
The detail that some of the figures have is absolutely amazing. You can actually see the
water staining on some parts. A fountain like that would run with rose water which was scented of
course with rose petals and gave a wonderful smell as well as a sound and a visual feast.
The composition of this is a sort of chariot, a shell chariot with Neptune and his bride on top
and it's drawn by those two seahorses towards us so it's actually quite a dramatic baroque scene.
The whole process starting for the first time seeing all the broken bits in store and having
the idea of doing something with it to doing all the research and then finally seeing everything
come together was actually quite emotional. It was wonderful because for the first time
you could really appreciate the composition of the piece together.
