Airlayer on a huge trident maple, Two bonsai out of 1!.

Eisei-en Bonsai
37 followers
Hello and welcome back to the channel, Life of Bonsai.
In this video, I'm going to be doing a huge air layer in this Trident Maple.
Now for a while, you know, I've been wanting to know what to do with this tree.
And ever since mid through last year, I decided that an air layer would be the best way.
The tree is pretty much fully awakened, still maybe some buds here and there, but it's really
pushing good growth.
So it's the perfect time for me to start doing an air layer and making two trees out of one.
So I'm going to be showing you the process of this air layer and once it takes, I'll
be making another video to show the update and if it was successful, which I'm pretty
sure it is, Trident Maples, I've heard that they can air layer real good.
So without further ado, let's go ahead and get started with this air layer.
And here's a close up of the tree.
So I'm thinking of doing the air layer somewhere around right here.
There is a scar right there, which let me turn the tree and show you.
It's quite heavy and I don't know if you'll be able to see in the video.
I don't think it's going to show.
It's hard to tell.
But there's a scar right there and I'm thinking maybe do the air layer over the scar and that's
going to give me a better cut when it comes to growing the apex for the rest of the tree.
So the decision has been made and for what I just learned as I was, you know, getting
into air layering this thing is that if I do the air layer right on the wound, that
area of the wound is not going to have any roots or there won't be any root growth.
So I would have to either air layer or do some other things and it won't look too pretty.
So there is an option of doing a higher air layer, but that's too short.
So I'm going to be doing a lower air layer right here.
And then once it takes, the wound is up here.
So I'll be carving that and creating a hollow to create a pretty interesting China Maple.
So let's start doing that.
So first things first, I do need to clean the area.
So this little guy is going out and I do have to do some chops on this thing just so I can
be able to do the air layer nicely.
So I need to, I think I'm going to have to remove these branches from the tree to the
side and get rid of all this growth.
All right.
So I have this branch and this branch back here, so that should be enough.
And now I do need to start cutting off the bark to be able to start the air layer process.
So I think I would do around right here.
That way it's not too, too low.
So you'll start marking down this area where I'll be cutting the bark off.
Around.
So now I'm taking you up closer.
And here we go.
I'm not turning back now.
Not turning back.
So I do want to remove all the bark off the tree.
If I leave any green, even if it's just a little strip right here, that is going to
be acting as a bridge and that would most likely cause the tree to heal and recover.
And, you know, the air layer won't be successful.
So I definitely want to make sure that I completely peel the bark off and take off that green
without leaving any bridges.
So this is what I'll be doing.
And I'm going to go all around the tree until I'm done.
So I have all that completed.
As you can see, completely peeled all around.
And the next thing is just to prepare my sphagnum moss, which I'll be using.
And I'll be using some clear wrap to wrap this area and have the sphagnum moss on it.
And here is the trickiest part.
To place the sphagnum moss on the air layer area, which I dislike.
I always find it so complicated, especially on upright things, which gravity really doesn't
help a lot.
But I think we're going to make it happen for sure.
Now, just to tie the edges, the bottom and the top, real tightly.
Just to not allow any moisture to escape from the bottom or the top.
And I think that's pretty well placed.
That should be really good.
So I'm going to trim this little...
I used a little rope, whatever you call it, to be able to tie it down.
And some wire.
And I think that should be it for the air layer.
Now, the waiting game begins.
So this is our air layer site right here.
Pretty well secured.
And I used that plastic wrap to wrap your food or whatever.
And I did a couple of layers of it.
I like it because it's pretty clear so I'll be able to see if roots are growing.
Now, there is two things that I could check for.
If it's successful, if I still see a lot of growth at the top and then once I get more
growth towards the bottom, then I'll be able to know that it has been successful.
So I'll keep you guys updated with this huge air layer.
Please subscribe, share, and you have an amazing day.
