MY 981 CAYMAN S GETS A GTS CONVERSION FOR THE LOW!

Nour Hummadi
114 followers
1.1K Video Views·Oct 2, 2024
Hey guys, welcome back to another video and in today's video, we're finally working on the Porsche, finally trying to get this thing on the road, and as you guys can see, we got some sick wheels on the beast.
We got some wheels on it on the last video. We have the car just kind of posted up right here. Absolutely looking absolutely amazing.
One issue I'm kind of having with this car is the cooling system will not bleed. I don't know if we're not doing it right. It is a really weird system to get it to bleed.
We bought the tool, but I think it needs like a really big air compressor and our air compressor is yay big.
So yeah, that thing's super tiny. I think it's like literally what a five, two gallon. So that might be our issue there.
But anyways, we're having issues bleeding the cooling system. It keeps overheating as soon as you pull out of the shop and it just will not hold cooling.
That being said, that's literally one of the last things we need to actually get it running and driving.
But another issue that I'm actually having, I've been kind of dealing with behind the scenes, that's the reason why the driver seats out of the car, is the wiring of the car.
The rear body control unit that controls the rear wing, that controls the trunk, that controls some of the stuff in the rear over here.
It's actually located right down here. So this thing was actually never opened before. So when you open it for the first time, you kind of have to break the seal.
I broke the seal and as you guys can see, yeah, that is really, really, really bad.
Apparently water got down here, corroded all these wiring. The wires are literally just falling right out of the connectors.
So I need to really just wires are falling right out as I'm pulling it out.
So I don't know what happened here. I don't know how far back I need to cut it.
I called Porsche. I asked him to see if they can actually sell me some of these wires, some of these pigtails.
And they told me we don't sell that, you know, so that was nice.
So to get all this stuff in the back of my Porsche actually working, I needed to get those wires.
For those of you guys who don't know, I founded this company called Nandi Auto Parts.
We part out a lot of BMWs here and I'm actually located on the street where there's a bunch of other dismantlers on the street as well.
Unfortunately, everyone that I called that is parting out Porsches doesn't actually have access to the wire.
I'm assuming they already junked the car or they don't have the wiring anymore or whatever the case may be.
That particular area is kind of like, it's kind of a common area for water to get down there.
I'm not sure how I need to figure it out to make sure it never happens again, but it looks like it's a common thing.
So that being said, I could not find that wiring anywhere.
On top of the fact waiting super long to get parts for it, to get it rebuilt, to put together for you guys.
It also took a very, very long time because of an inconvenient issue like that.
And yeah, this build has just been taking way too long.
So I'm sorry for that.
So I did what every reasonable person would do and I just went ahead and just bought another Porsche.
The exact same color.
I wish this thing was honestly on the market when I was looking for my Porsche.
So then I can honestly just take all the parts and rebuild mine.
This thing has good headlights.
It actually has a GTS front bumper, which is super sick.
It has a GTS taillight.
I say one because it's kind of damaged on the other side.
But look how sick that looks.
So that is super nice.
That one, that smacked over there.
And it had, what's also super sick, a GTS OEM diffuser.
All these parts are OEM.
The diffuser is shown right over here.
So that looks super nice and mean.
So that's obviously going on my Porsche.
Super excited for that.
So yeah, super happy.
Came with all these goodies.
I actually did not know that when I was bidding on this car.
I was just bidding on a normal Cayman.
This is a normal Cayman.
I have a Cayman S.
It's a completely different breed, honestly.
But they look almost identical.
And most of the parts are honestly interchangeable.
Same way I actually have a GT4 bumper on here.
I can put a GT4 rear bumper.
You can actually put a GT4 bumper on a regular Cayman as well.
So that being said, we got this Porsche right over here from auction.
Chilling like a villain.
I do actually like these wheels.
And I do like those calipers.
But I think my setup does look a lot better.
But anywho, this car thankfully is in absolute mint condition.
Sarcasm.
But all the buttons are actually working.
So everything actually works.
Thankfully, as soon as I got in this car, as soon as we bought it,
I pressed on this button and thankfully the trunk opened up.
Everything in the rear of this car is working.
Which means the rear body control module is not flooded.
Which also means that we should be good in terms of wiring.
So yeah, we will be getting to that a little bit later.
I'm going to go ahead and do some business stuff and just take apart the car.
And then once I actually get to the seat and the wiring,
I'll go ahead and show you guys that.
I'm still waiting on my soldering equipment.
So we can get that cut up and then solder it onto this bad boy.
So guys, this is where we've gotten so far on the Porsche.
The whole front clips off the car.
Nothing sold yet.
But it's only been what?
12 hours?
Roughly.
Roughly 12 hours.
Pretty much our following is mostly BMW people.
So Porsche parts, we're still kind of testing the water.
But we're getting stuff listed on eBay.
I think it's only been up for maybe less than 12 hours.
So we'll let you guys know if things end up selling hopefully quickly.
Because it's an expensive car.
I'm not going to lie.
But anywho, coming around to the interior of the car.
Thankfully, so I removed the passenger seat.
This kind of scared me right over here.
But after lifting up on this,
there's a little bit of water corrosion.
But I don't know if this is repaired.
I don't know if that's factory.
It looks repaired.
So it looks like at one point this harness was also flooded.
It looks like a common issue with these cars.
It just gets damaged down there.
They repair the wires.
Call it a day.
I don't know.
It's weird.
It's a weird thing.
Oh, here's the E91 M3 that y'all love so much.
That one day I'll give it life again.
But she drives.
So that's cool.
Coming around to the driver's side,
which is the only reason I bought this car.
We got some good news.
Opening this up, there's no corrosion whatsoever.
The module looks phenomenal.
It works.
We tested it out with the trunk and everything.
And all these wires look phenomenal.
Literally look brand new.
So that is the...
That right there is the reason we bought this entire car.
So super happy that came out the way it did.
I'm actually going to go ahead and cut it back.
Maybe 6 feet.
Like 2-3 feet back.
Just for my peace of mind.
So when I get to work on that car,
I'm going to take my time.
Go through all the wires.
Make sure everything is just cut, soldered, replaced.
I'm not going to do the tapping kit.
I'm actually going to solder it all.
Because I want it all to be proper.
And I'm going to heat shrink.
Whatever it's called.
That's going to be later on in this video.
I want to finish up this Porsche.
We got so much things to list on this car.
So I really want to take everything apart on this car.
Get this car out of here.
We're going to chop up everything on this.
We're chopping off the front clip.
We're chopping off the quarter panels.
Might even the roof.
Because everything on this car is super hard to get.
So if people need parts,
reach out to Natty Auto Parts.
Because we got it all.
But anyways, with that being said,
I'll catch you guys probably...
For you guys, about 5 seconds.
For me...
What do you think?
Day? 2 days? 3 days?
2 days, man.
I'll see you guys in 5 seconds, 2 days.
Alrighty.
So I went ahead and moved all the other cables out of the way.
These are the 4 wires that are pretty much ripped off.
They're all off one connector.
So it does make things a little bit easier.
And they are thicker wires.
So that is pretty good.
Now looking at the wires,
unfortunately, they are corroded.
So I'm going to go ahead and just cut back maybe an inch
for each one.
And hope, and hope
that that is pretty much
as far as it's corroded.
Because if it's corroded all the way back here
or somewhere way back here,
that's going to be a
fun time.
About 15 minutes later, guys.
I got all these stripped down.
Looking fantastic.
This is a new connector.
No corrosion.
Looking beautiful.
This is the old one.
Take a look at that.
That is just GG.
So, yeah.
Saying goodbye to this connector.
And then coming in here,
I stripped down all the wires.
Got them all.
They look honestly fantastic.
I shouldn't have any connection issues.
Kind of spinning out the wires
because unfortunately,
my smart self forgot the keys to this car at the house.
So the car still has power.
I don't really recommend doing this when the car has power.
But,
I finally have time to do this
and I'm going to do it.
So, that being said,
I'm going to go and resolder all that onto that.
Hope to God,
nothing bad happens.
And then,
yeah.
I'll be able to connect the module.
And I don't know if the trunk is going to open
because I don't have the key.
But,
regardless,
in this video,
I'll show you guys if it works or not.
And about 30 minutes later, guys.
Check that out.
Fully soldered it up.
Electrical taped them all individually.
Then electrical taped them all together.
So that looks absolutely fantastic.
I'm going to go ahead and clean up this entire mess
so I can check back in here
in a few months
to see if any more water is actually coming in here.
And if there's a way to prevent this issue,
if any of you guys know about this issue,
please let me know.
I don't know if it was because of the windows.
I don't know if you guys can see the door panels.
They're slightly peeled over on both sides.
Can you see this one right here?
It's peeling up.
So, I don't know
if it came through the window at the auction
or this kind of drainage issue
and the water ended up there with the modules.
Because some BMWs have this issue.
So,
I wouldn't rule that out
of the equation.
Any who's.
Now that that's knocked out,
super happy about that.
Let's go ahead and get the module all fully connected.
Clean up the area.
And then,
I'll show you guys
once I actually get some power to this area
and see if all the trunk stuff works
because my smart self forgot the key.
So guys,
it turns out
I actually did not need the key.
Check this out.
Holding that button,
the trunk actually opens.
So,
no coding necessary.
I did what every reasonable person would do.
Didn't want to get the module coded.
Didn't want to get a new module.
And didn't know how to get wires.
So,
we just got another Porsche.
But any who's,
I feel like that was a reasonable thing to do.
And thankfully,
the car is in perfect,
technically working shape
as of right now.
Obviously,
I'm not sure
if there's a bunch of other issues
that need to be taken care of.
But that module was getting no power
by those four main power wires.
So that being said,
that module should be fully working.
And hopefully,
all my electronics are working.
Now,
it could have actually blown some fuses.
Not a big deal.
But for now,
since we actually can get into the trunk,
let's go ahead and do the GTS upgrades
because I feel like
we don't want to just end this video with a repair.
We should honestly do some upgrades.
And I got a few good ones here for you guys.
Now,
the crazy thing about this job,
guys,
just as easy as it is
to get the headlights off this car,
the taillights are just as easy.
I don't need to remove the bumper.
I don't need to remove anything else.
There's literally just like this one,
right here,
this piece right here.
Remove that
and then one bolt.
Literally just one
that holds this entire taillight together
and then we can go ahead and upgrade.
So for any of you guys
trying to upgrade your car
Honestly,
even exhaust.
We're showing you guys that pretty soon.
You can probably do your headlights,
taillights,
and exhaust retrofit,
upgrade,
whatever,
and less than an hour.
Genuinely mean that.
Now,
if you're asking me,
how long does it take to do an alternator?
Three years,
but we're not doing an alternator,
thankfully.
So let's go ahead
and upgrade our GTS taillights.
Just one 10 millimeter
and then this bad boy
should literally,
theoretically,
come out.
Okay,
so that was pretty easy,
guys.
You literally just need to shove something back here
because there is a tab
and it looks like
one of my taillights
is missing that tab.
So I'm actually going to remove it
off this taillight
and put it onto mine.
Easy peasy,
lemon breezy.
Guys,
it looks so much better,
but unfortunately,
I don't know if you guys can see
when I removed my taillight,
there was a tab on it
that I basically removed.
As you guys can see here,
it just goes on like that.
This one has it as well
that I removed
off of the donor car,
but this one,
unfortunately,
that I got in the mail
got shipped out to me
as you guys can see
all the lettering and stuff.
The tab was broken
and honestly,
I was like,
if it doesn't affect anything,
I'll just run it,
but unfortunately,
it does affect the way
it gets mounted.
It's popping out on the side
and that's going to bother me
especially considering
how much I paid for this taillight.
So I'm going to go ahead
and hit him back up
and see if I can get
some kind of refund going
or just maybe a partial refund
and then just kind of do something
to make that work.
But that is super unfortunate
because I really wanted
to get both sides on.
I might just get it on for now
until he tells me what's up
because there's literally
one screw,
it's easy.
So I'm going to slap it off for now
and just run it
and then see what happens
but that is really,
really,
really frustrating
because that's frustrating.
I mean,
it sucks when you get parts
and they get damaged.
Here at 90 Auto Parts,
we make sure to pack
everything very,
very,
very well
so you don't have that issue
but I guess other shops don't.
You know what I'm saying?
So it is what it is.
So guys,
I actually got the taillight in
and it's actually sitting
really,
really flush
but the thing is
there is no limit.
So that little plastic thing
back there,
as you tighten in the taillight
it gets kind of harder
and harder on that side
and you pretty much
know when to stop.
This,
there's really no cap
so it's literally
right against the frame
is where it stops.
So this taillight
is inwards
more than the other side
but I guess
it is what it is for now.
Again,
if he's willing to send me
a partial refund
I'll be willing to keep it
but because,
you know,
the gaps are different
it kind of bugs me.
You know,
we'll have to see
but I'll keep you guys posted.
Taillights looking fantastic.
Let's go ahead
and do the diffuser.
So guys,
you have both diffusers
side by side.
The GT4 looks different
from this.
This is a regular Cayman.
There's a GTS
and there's a GT4.
I actually wanted
the GTS taillights
which I absolutely love
plus this GTS diffuser
is going to make
this rear end
really pop
and it's not actually
copying the GT4 theme.
The GT4 front bumper
does look better
so I went with that
but yeah,
kind of mixing everything
up from all the Porsche
OEM parts
these are all OEM parts
by the way.
Does need a little bit
of cleaning up
but after some love
it's going to look
absolutely fantastic.
This definitely looks
a lot better than this.
I cannot wait to get it on.
As you guys saw
another few days later
it literally took
about 10 days
15 days
to get this video
together for you guys.
So many things
with the Porsche
it just takes so long.
Again,
the wiring was a huge concern
and I don't want to
get into too much
more talking
into this video
but the GTS tail axis
looks phenomenal
the GTS diffuser
looks phenomenal
thankfully the wiring
did work
so that's a huge plus
in the next video
we're probably going
to install some more mods
and then I did make
an appointment
with Porsche
to actually get
the car looked at.
I need the cooling
system properly done
I'm hoping they'll
look at it
even though it has
a branded title
and then I'm also
hoping they'll
want to do an oil
change there
because it is
kind of a little
more complicated
on Porsches
and then also
to diagnose my radio
because that doesn't
work so I want
Porsche to look at
all that kind of stuff
because I don't
really have anyone
to look at that
kind of stuff
but yeah that
appointment is
coming up pretty
soon here
but in the meantime
the car is going
to continue to get
upgrades because
when this thing's
running I want to
definitely be able
to enjoy this bad
boy.
Without further
ado guys
I'm just going
to have to
conclude the video
if you guys are
looking forward to
another Porsche video
make sure to smash
that like button
and if you guys
want to see another
crazy M build
make sure to smash
that like button
I have something
kind of crazy that
again a limited
handful of people
has ever done
and I'm considering
on doing it again
kind of again
on this YouTube
channel in a
different way
so let me know
down below guys
if you guys want
to see a crazy
another M build
or if you guys
are enjoying the
Porsche content
want to see some
more Porsche content
let me know down
below without further
ado guys I love
you all so much
remember to stay
on the next one
peace out.
