180SX - DREAM BUILD EP6

Tuning Pro
54 followers
In this episode of Mighty Car Mods, we've got the 180SX down at Haltech to throw on the dyno
to try and get our massive 180 kilowatts at the wheels.
Welcome to another episode of Mighty Car Mods. That's right, it's time for the awesome slash
dirty Nissan 180 to go on the dyno and see if all those mods that we've done, particularly the
engine, the fuel system, the ignition system, have been worth it, especially with our mad new S15
It is a very, very exciting day. Now, we originally wanted to go to the dyno last, but
this, when we had it booked in, there's a bunch of stuff that hasn't been done. It doesn't have
the badge on it yet, it doesn't have my old Nismo old logo cap on the oil yet, because that is,
that's when we know that it's all done. We've still got to fix up the wing stuff, you probably
saw last episode, that didn't fit properly. That is something we're gonna have to do later, but today
it's about getting it on the dyno and seeing what kind of power we make. Now, Martin, at
pressure, it's possible that we actually make more than the 180, and that means this project has been
a complete not a failure. No, well, not a failure at all. Look, it is completely possible that that
happens, but also, I would say, this car hasn't been driven for ages. It's sat around for a long
time, and when we did drive it, when we first got it on the track, it was very, very unhappy. So,
being it's not registered yet, we haven't been able to put any Ks on it, this is the first time
we're really gonna be driving it in any anger on the dyno. So, I'm crossing my fingers nothing
explodes out of it. Rods, oils, fluids, coolant, anything that's supposed to be inside the car.
Driven in love, Martin, not in anger. So, that's what the dyno's for. We're gonna test it as long as
everything works. We're tuning this thing and then it will be ready to rego and drive. But we did
set up from the very beginning that we wanted 180 kilowatts at the wheels. You did say that. If we
don't get 180 kilowatts at the wheels, the mission has not been accomplished. That means you fail, but
if it makes 240 kilowatts at the wheels, I'll be cheering and I will have won. Ah, well, it's not a
in every way. In car-ness. Um, all right, uh, Scotty, of course, is going to be helping us the tuning
fork. He's been helping us for years. He knows about his cars. We, of course, will be taking a
guess of what kind of power it can make and the winner will be getting a prize. Uh, in fact, right
now is your opportunity, before we go any further, to guess below what the number is. Don't fast
forward, just look right now below, put your guess in of how much power you think it's going to make
and, um, let's see. Actually, you'll get a prize too. You know what? Someone, we're going to give
you a prize too. Let's load it on the dyno. Let's spin it up. Let's see how we go. While we are
aiming for the specific figure of 180 kilowatts, it doesn't mean that the car will actually make
it. In fact, it could make more or less. That is just the physics of the system and the name of the
game. And that's assuming the car works at all. Other than driving on and off a tow truck, it's
still completely untested and a full send on the dyno could be the exact thing that makes this car
go kablamo. I'm down here with Tuning Fork, also known as Scotty Hilzinger. Thank you very much.
Hello mate. Before we start, I know people come down here all the time and they go, they've got
a magic number. I want 500 kilowatts. I want a thousand kilowatts. So I am coming to you with
that today. All right. These, it always makes me nervous. Okay. I want, and I don't want any more
or any less, 180 kilowatts at the wheels because it's a 180SX. Can we do it? All right. You know,
it's amazing. This is probably the first request ever. I think with this, we can make the lower
number of 180. Can we? Yeah, I think so. Okay. What I'm nervous about is if we can't get enough
boost out of it and we make more than that. So this is an unusual request. We can't make more,
so it just needs to be one. All right. The world is full of YouTube builds and everyone making a
million kilowatts. These, what are they stock? 100, 105? Yeah, not much. Approximately. So I think
180 makes a really fun car. Would you not agree? Can you help me pull down the veil of the too
much power on the internet, steam? If this makes 180 kilowatts, the thing is going to run forever.
You can take it to any track day. You can hold it flat and then you can use your driving skill
and your car setup to actually enjoy that rather than just make 400 kilowatts and then first corner
you're done. Scotty Hillsinger everybody. Scotty Hillsinger. We also have over here, Martin of
course is still here and David's here as well. He's recovered from his jellyfish sex incident
and he's back. So we're here on the Dono, 180 kilowatts. We've gone through all the mods. The
car's here. It's freshly painted. Please don't lean on it. I mean, where you were holding it was fine.
Yep, that's okay. Now it's not finished yet, so don't be checking too closely the panel gaps and
there's no badge over there and there's no wing and a few holes. Don't worry about any of that.
We're getting to that, but we're here for you because, oh let's be honest, we're here for me.
Come on, we're here for me and my car. But I'm very happy to be working with you again today.
Always a pleasure. Well, what we'll do before we get too carried away, let's just do a bit of a
health check. So we'll warm the thing up and then check oils. Just check everything and make sure
that we're not missing anything. Then we'll do some revving stuff and make sure that all the
belts are going to stay together. We don't have any funny noises. Yep. Then we'll get into the
tuning part of it. No point in doing the tuning part until we make sure the thing is going to
hold together. Great. All right, let's do it. Thanks for having us down. Pleasure. With a car like this
that is untested, we're starting our session by running it up at low RPM to give everything a
check. And sure enough, we already have a problem. We're not getting boost control. Well, a couple of
little gremlins, but nothing crazy. So the first one was just some boost control plumbing, which
that happens all the time. Even I forget which input, which one's the in and which one's the out
on the solenoid. So I always just look it up. The other thing that we've got there is there's two
two pin plugs in the 180SX. One of them's an EVAP solenoid and the other one is the boost control
solenoid. So we've just got those two back to front. I like how you very politely said we have
these gremlins. It was me that installed this. I think it's polite to say we. So it's not actually we at all.
It's just fake. We shares the blame and it's not live. You can just tell me that I got it wrong.
In other news, we is tuning up really nice. The injector setup is all really good. Okay, good.
The fuel pressure seems to be set. Well, that's at 43.5 pounds, which is about pretty much normal
what you'd be expecting. But the injector size and everything is all working really well. Okay, good.
I can sort of tell that because the way that we tune the engine is how efficient it is. So
basically, every time the camshaft spins around, it's a two litre engine. Two litres of air should
go in and two litres of air should come out. Except for when it's boosted, but we kind of,
let's just talk about it as if it's an aspirated thing. So the efficiency of the engine at 100%
efficiency, two litres in, two litres out. Knowing how much air is there, I can then set my air to
fuel ratio. I just need to then map out how efficient the engine is, which being a four
stroke engine, it's roughly 50% efficient at idle and roughly 100% efficient flat out, which is
normally 90, 95, something like that. Okay. When all my numbers in my fuel map all kind of line up,
it tells me that I'm not manipulating anything or trying to make up for inefficiencies in fuel
system or injector size or anything like that. And at the moment, everything's looking really,
really good. The O2 trims are all working well, so not much to report. As soon as we can get this
thing ticking and get some more boost in it, things are good. A quick general question. If
we're running a turbocharger with one bar of boost, so one atmospheric pressure, 14.7,
are we now putting in four litres of air and four litres out? Like, is it double? Because
we're literally adding, we have the normal aspiration and then we have the same amount
again. Yep. We're expecting to double, yep, double the oxygen content that's in there. Yep. And if
we're putting 15 pounds of boost into it, we would also expect to put 100% more fuel into it, would
be the rule of thumb. Yeah, okay. There are inefficiencies, so you don't always exactly double
the power. Is that to do with heat as well? It's heat, it's inefficiencies in flow, it's the exhaust
restriction and it's the exhaust turbine restriction as well. So the back pressure from
atmosphere on the exhaust system makes a difference and the more stuff you're pushing out,
the harder it is. So there is a diminishing return there. You can't put two bar or 30 pounds
of boost in it and get three times the aspirated power. I could hear you talk all day, Scotty.
Are you the same? Do you feel like you could just listen to this all day? I could. I love it. And I
get to do it in person. I feel very lucky. I feel very lucky, Scotty. I do enjoy it. I still really,
really like it. It's nice. It's good to be able to do all this stuff. You've been doing it for a long
time. I thought we'd been doing it for a long time. We've been doing the show for 15 years.
You've been doing this for 20, right? Nearly, nearly 20 years. Wow. Long time, hey? And you've
seen some things. Every single day, I think I still learn something, which is probably the
attraction to it, you know? It's really nice. Luckily, this is a fairly simple fix. Swap two
of the lines around and then re-pin the plug, and we're ready to try again. Dave's just rewired it.
New Deutsch connector with his fancy, look how fancy this is. Look at that. So special. Anyway,
now we are testing it, and Scotty can activate it from inside the car, and now we're hearing
relays going click, click, so we know it's working, which is awesome. Now that we've got some boost
control, we're going to spin it up again on the dyno with a target of 12 pounds of boost initially,
and see what kind of power figures we can achieve. On full throttle, go. Just touched the rev limiter
at the very top. So 149 kilowatts on 12 pounds. Time to page up. So we'll put two degrees of
timing in it. We're so far away from anything that's a drama, but what we'll see here is
if we're even close, if we get a significant gain. As soon as we don't get a significant gain,
we'll pull out of it straight away. Okay, cool. A little. Enough. We're going to move it up to 14.7,
one bar, and that should get us closer, if not achieving our 180 kilowatts at the wheels.
Let's do it, Scotty. Beam us up. Page us up, Scotty. Target pressure is now 15 pounds. 15.
I'll start our data logging. Come up on it. Full throttle. Let's do it. 180, 180, 180.
That's going to be close. Go under. It'll go under. So picked up a lot of mid-range because
the boost is coming on earlier now. Yes. Top end. Not a lot of peak though. Yeah, not a lot of peak.
So, what do we do now? Up we go. 17. 18. 18. 18. Three at a time. You've got confidence.
Yeah, I've got confidence in you. Not in myself, in you. All right, here we go. 18 psi for 180
kilowatts in the 180SX. Let's do it, Scotty. I feel good about this one, people. Feeling good.
Look at that curve. Look at the curve. Let's check the numbers. You done? No, no. We need to see one
eight. So, do we go 18.5 now or we just go to 19 or we just go to 20? Let's tidy up the ignition
timing. That'll do it, won't it? Let's have a look. Let's put in. We'll put two degrees in up here and
just see what happens. See what it wants. Okay. All right, here we go. On. Full throttle. Go.
Is it too much? Was it too much? Never too much, is it? I think it's going to be like 183.
Good job. Excellent. Thank you, Martin. Thank you, Scotty. Good job. Admittedly, a relatively
straightforward job, but the one thing I do just want to point out with it, that
that's a beautiful car. With keeping the tiny turbocharger on it, have a look at this thing.
It is making over 150 kilowatts for the meat of the rev range. Yes. Yeah. And that is the thing
that if we go and put a GT35 on this or a GT30 or whatever. It's going to do this, right? Yeah. And
the difference will be that down low, you don't have that drivability for that amount of time.
Yeah. So, yeah, I get it that it's mad to have three and four and 500 kilowatts and I definitely
appreciate that, but I also appreciate targeting some of these. Is this the lowest powered
performance modified car you've had on here other than a Honda? Very, very, very long time. Your
aspirated Honda is 140, 150 kilowatts. Not our Honda. Not our one. So I get it if you might get
slightly frustrated that it's only making 180. No, no, because we're back in 1994 now. Yeah.
95, 96. People didn't want to blow their warranty straight away. Like this is 1996, 1997 era power.
Imagine owning a 180SX with warranty, like VMs. Yes. The shape of this car back then would have
been like pretty radical. Yeah, yeah, yeah. This is lining up with what I remember because 22 pounds
220 kilowatts. Yeah, okay. On a stock S15 turbo 220 on low 20 pounds of boost was the number.
Yeah, because they are not, even though they're famous engines, they are not these massive power
houses, are they? The combo on it is perfect. The thing hasn't missed a beat, so. Look how nice it
idles. It's idling. It makes mad choo-choo noises. 900 RPM. It's got good vacuum. Turn it off,
Scotty. Just turn it off. No, no, just we're done. Turn it off. That's it. Yeah, we're done.
We're finished. I thought you were worried it was running out of life, just idling. I'm so happy
with that curve. Thank you very much. Always a pleasure. You are the boss, Tuning Fork. Yep.
You're the big boss. Oh, thanks, guys. I always enjoy a day on the dyno. You know that. It was a
lot of fun. Martin, I'm stoked. Yeah, you should be. That's mad. That's going to be so good to
drive. You can tell from that curve. That's straight away. Put your foot down. It's going
to make mad sounds. You're going to be gone sideways. We've hit the power figure and nothing's
exploded, and I am absolutely stoked. Now, we've just got to finish a bunch of little jobs in
preparation for our street registration. 183 kilowatts at the wheels. I am stoked. Perfect
power for this car. It's looking amazing. We've just come back from the dyno, and Marty and I have
done a bunch of little, like, fiddly things. Fix-ups. The most probably important thing is I
changed the coolant overflow bottle. These do have a reputation for cracking, and ours was
starting to have hairline cracks all through it. If that lets go, you get coolant everywhere. It's
not a fun time. You can buy aftermarket ones, which is awesome, like remade ones. So, I just
replaced that, which was super easy, and my next job was also to tuck away all the ECU stuff. So,
rather than having it hanging around in the footwell and you end up stepping on it or
getting crap on it, we've just tucked it all in and put the factory panel back in place.
Now, at the back of the car, I had to do the number plate adapter. It's got one of those
weird, like, JDM flappy ones, and also run the wiring and the lights for the running lights that
light up the number plate at night. Put all the interior back together, so the kick panels and
stuff. If you have a look inside now, it is just absolutely bellissimo. I would actually say
there's probably not many 180s in the country that are this clean. So, there's a couple of tiny
little things that still have to happen. The whole car needs a little bit of a kind of a clean and
A couple little things fixed up. It's not registered yet, as we spoke about. It still
needs the blue slip, so it has to go through all of the safety stuff, check all the lights and
everything. That, we expect to be happening in the next one to two days. The wing, we have to repair
the back and repaint all of that stuff. That is going to happen, and then it's ready to actually
reveal it in its finished form and go for a drive. And drive it. Yeah, it drives really nice. The
power steering also kind of fixed itself. The big drama we had, literally, the day that we were going
to the dyno was the high pressure feed for the power steering just gave up. Just leaking. We fixed
it, we put new fittings, and then there was like a pinhole leak in the actual rubber that was
spraying stuff everywhere. So, just having a bad time. So, we ended up just replacing it with a
Dash 6 AN line and some bump tubes that go onto the power steering thing. But, I did it late at
night and I wasn't watching and then I had a tiny kink in it. So, I had no power steering and I
thought, oh well. Worked that out, repositioned it, put it back together, quickly slapped it on the
truck to take it to the dyno. And once it was on the dyno, it fixed itself. Because it just bled
out all the air and now it has power steering that works fine. So, that's good. The last 20%
always. But, I think right now, being that it's mostly finished, it's time. It's time for this
item, Martin. Badge engineering. It's time for this to go on. This is a Type X emblem. It's called
Emblem Rad because it is. And that is going to be going right here. I imagine it probably has some
like sticky stuff on it. If it doesn't, we can find something. If it doesn't, we will put some on there.
No, no. We're good. So, here we go. Oh, it's got. We've got to drill some holes. Oh, do we? Yeah.
Cool. We've got to drill. Either that or these have got to be snapped off. But, I'm pretty sure.
Take them off. We're going to just go. Oh, they look so good. This is pretty exciting, isn't it,
Martin? Really? I mean, you've just got to love what's been going on over here, mate.
All right. There's that one. Now, before I get too excited and do the badge, we also have to make
sure that the car is covered. Now, all of our cars are insured with Shannon's. They're a sponsor of
the show. And the 180, even though it's not been registered, has been with Shannon's as laid-up
cover, which means it's been covered while we've been working on it. So, it might be off the road.
You might be restoring it. Whatever. Laid-up cover means you still have some coverage. Laid-up cover
stops when your car moves under its own power. So, in our situation, the car's been dynoed. It's
roadworthy now and ready to be taken for an inspection. In our state, you can drive it there
to get it inspected. So, at that point, you want to call up and change it back to full comprehensive.
Yeah. And so, as well as having all of the different insurance for cars, Shannon's also do
CTP. They do home. They do roadside and stuff like that. But what's important for us
is that we get a choice of repairer and also agreed value. So, some insurers, you might call
and they go, oh, we think it's worth this. Whereas, with Shannon's, there's an actual value. And we know
that these cars have been going up in value. You can't get them for five grand anymore. When we
were looking, you couldn't even get them for $20,000. So, it's a matter of having a chat with
them and working out exactly, you know, agreeing what we think the car's worth. And then, that will
be locked in. That is the car's value. And so, we need to get that ready. We need a CTP, which is a
compulsory third-party insurance that we have here in New South Wales. Get the comprehensive done.
So, I'm going to call and get that done. So, look, we'll get the badge on. Then, we'll sort all of
that out. But if you need a quote for your car or house or bike, you can check that out at
shannons.com.au. And then, we can go get our number plates and drive it on the street, which is what
this is all for. So mad. Martin, we need to do this together, mate. All right. I'm gonna peel the first
bit off. You peel the next bit off. All right, Martin. Are you ready? You get your finger on there
as well, Martin. Say when. When. Yes. There it is, everybody. In between now and when you see it next,
we are going to save you the pain of having to go to the RMS to do all the registration. We're not
showing you that. Pick up the number plates and stuff. We have done that once before. What I will say is
that if you've enjoyed this build, this here now would be your last chance to get one of the
signed posters. They're gone. To celebrate the 180SX. And then, they will be gone. We'll reveal the car
next time and then these will be gone. So, you can check those out. They're autographed and we will
send them to you anywhere in the world. We do them individually. As your order comes in, we go, oh,
there's Johnny Smith. We sign it. We wrap it up and off they go. They're sent in a tube with foam
and stuff. And also, the brand new chopped hoodies are available right now as well. So, what have we
done? We've restored and brought back one of these to look pretty much as good as it when it rolled
off the factory line maybe 30 years ago or thereabouts. It's heaps of work. It's heaps and heaps
of work. But, I reckon it's totally worth it. This thing can just go for ages now. Especially now
they're actually worth something and people are more likely to look after them. It's what we see
with so many cars of this era. You know, it goes through a few people. It ends up in someone's
paddock or backyard and they don't have the money or time or whatever to fix it and it rots and rots
and rots and it's beyond saving. Which is what we see with a lot of the sort of show cars we've
ended up with actually. This one, luckily, was already pretty good and with the paint job and
all the mods and all the modernization that we've done, I reckon it's going to go for ages, man.
Yeah, I think this project kind of became an analogy or a metaphor for boost. The more it went,
the more we had to do. You know what I mean? Originally, it was just, oh, it's a bit smoky.
We'll change the turbo and just, you know, do some wheels and off we go. Next thing you know,
it's parts from all over the world. From Europe, from America, from Japan, from Australia,
the paint. It does look as good as new. So, anyway, we're going to finish off all of this stuff and
then next episode, we will be able to reveal the final one. We hope you can join us to check that
out. Thank you very much for watching. You can get the poster, you can get the hoodie and Martin
and then we move on to some other stuff. So, thank you very much. We know this series went really
well. We saw a lot of people in the comments who are really enjoying it. So, thanks for your kind
words and comments. You can follow us on the socials, of course, Instagram, Facebook and TikTok
and check it out. Thanks, everybody. See you next time. I want jalapeno chips. Bye-bye.
Jalapeno chips. From Washington. 100%. They're so good, man. Washington jalapeno chips.
As good as you're going to get. Yep.
