Haltech IC7 Dash Install into Supergramps

Tuning Pro
54 followers
In this episode of Mighty Car Mods, we're installing an all-new digital dash into Super Gramps.
Welcome to another episode of Mighty Car Mods. We had a very exciting delivery today. This has
literally just come in today. We have a brand new Haltech dash, which is going in to Super Gramps.
Now, Haltech is a sponsor of this show and we're really proud to be working with them because
they're an Australian company and you see Haltech ECUs in cars all over the world. In race cars,
drift cars, drag cars, circuit cars and about to be Super Gramps. We've been dealing with Tuning
Fork, Scotty and Dave at Haltech for years now. They actually helped us get this working, get this
car working without the Elite that's in it. It probably wouldn't do what it does with ethanol
This, not even in the the official packaging because it's pre-release, is an all-new display
dash. So this is the IC7 display and here it is. Oh, it's like a Nintendo Switch except it looks
like Pro Car. Yeah, so that display will plug in via the CAN network, which means literally like
four wires to communicate with your ECU. It'll communicate with Haltech Elite like what's in
Super Gramps or the older Platinum ones or even it'll do OBD2 to normal cars too. So if you just
want a dash, you can check the compatibility list and this might be able to display stuff coming off
your factory ECU, which is pretty cool. You can also get a mounting bracket for it, optional extra.
There's a couple of different ones you can choose from, which is really cool, that sort of shades.
So obviously this is meant to, in a lot of cases, go where your instrument cluster normally goes.
Yeah, so behind your steering wheel you've got a little shade there. You can adjust parameters
of the display there and a few other features which we'll go through later. It's got different
looks. We have not actually seen this yet. It has not been powered in. We have never seen this before,
but to give you some context of what it's replacing is this is what is currently in Super Gramps
here. So that's a kind of, it's a big difference, but from what I understand is there are
customisable displays, including one that's kind of designed to look retro like that. Exactly. But
we're gonna see it as you guys see it and you may also have like a stripped out car for the track
and something like that. You might not have all the dash stuff. You literally just go blip, plug it
into your ECU, your Haltech, and just go blip and you're ready to go. That's it. So the wiring
there that comes with, that's the same kind of plugs that the Haltech Elite uses, so they're
really easy to customise. You can put like your blinkers and your headlights and all the stuff
you'd normally have on your instrument cluster on this. Fuel level senders, run them into your ECU,
display them on here. Pretty much it's the flexibility of what you can do with this that
makes it really an exciting thing. You can just throw it up there and put speed and tacho and get
on with life, but you can also customise it in a big way. We've got a lot of data acquisition
happening on this car in order to keep it running, so temperature sensors in each of the cylinders,
temperature sensor at each side of the intercooler to see how efficient that is,
ethanol sensors, all this stuff, and now we can see it. So not having to plug in a laptop anymore
and the display that's in it, it's useful but it's not quite, it won't quite do what this will,
which is really exciting. And because of that, you don't need to have fear of the data. Fear of the
data. Is that some obscure reference? No, it's a fear of the dark Iron Maiden reference for our older
viewers out there, but instead of fear of the dark, it's fear of the data. So what's really cool about
this is you've got your CAN connection, so you've basically got this little plug like that, you've
got this extension that'll run down to your ECU, and that'll just plug, bang, straight into your
ECU. In our case, we might have to do a little bit of fan-doodling with our CAN hub, but being that
we've already got a dash in there, that's running off one of the channels on our CAN hub, so we,
in theory, should just be able to go click and it will just work. We're also going to install it
into the dash. You could put it where your instrument cluster goes, that is an option.
I quite like the factory dials and the factory look, and I want to put this in the dash,
like in the, sorry, centre console, sort of in the dash there, so that I can just look across
and see it, and I have the flexibility of getting my speed, and revs, and the normal stuff you get
on there, temp, fuel, and then on this, I can display all the extra stuff. Does that mean if
you're going to fit it in there, that we are going to be actually cutting up your car? Yeah, we're
going to cut up the car. Luckily, you can still buy those bits, so if we stuff it up, we'll just
have another go. But yeah, we're going to try and install it in the dash. It's not a standard, like,
DIN size, so you don't just put it where your stereo goes. Like, if you want to put it in the
dash like I'm doing, you've got to cut stuff up. If you want to just have it in front of your
existing instrument cluster, that's another option, and you can use the various brackets to do that
with. We're going to try and get it into the dash as best we can. I don't know if it's going to work.
You're going to come with us, and we're going to give it a go. A dash like this is a window into
the inner workings of your car's ECU and engine. Customised readouts of things like temperature,
fuel, oil pressure, boost, and timing, means you can see exactly what's going on at any point in
time. The dash has a 7-inch display, programmable multi-colour LEDs, and connects via the CAN
network to our Haltech ECU, or to OEM ECUs via OBD2 also over CAN. The gauges and alarms are
completely customisable via the included software. All right, so that's a little bit about the unit
itself, and now we just have to work out where it gets installed. So I left the dash apart from the
last time we were playing with this car, so that we could work out what's going to happen here. So
this is where I mounted the old IQ3 dash. This is the one that Haltech have been supplying for
quite a while now. I think it's developed with Race Pack as well, who make dashes for people who
are doing race cars and stuff like that. It's just a bit more old school, like it looks a bit more
previous generation than what we're dealing with now, so this one... Which goes well with your
little coilover thing down here, Martin. Absolutely. So this old dash is plugged in in a similar way,
but you've also got like this plug, and you make your own little buttons, and like this is how you
control the old dash with this kind of stuff, whereas the new one has the buttons actually
built in, which I think is kind of cool. It does feel really Nintendo-y, doesn't it? Yeah.
A Nintendo Switch Lite is what it looks like when the joy-cons are attached to it.
So, you know, a lot of people put these dashes in here, which is sort of the purpose of why they're
this shape, and that's the idea as well with the new one, is that you can just grab it and mount
it up on your steering column, wherever, like fit in there, depending on the size and shape.
I don't really want it that far forward. I want it over here. So what we're going to try and do
is get it either in there or in there, and there's sort of two spots we can put it. That will actually
fit up under there with a bit of cutting. Up the top, I've already got in advance, because I want
to put... Always wanted to put a screen in this car, actually. That was the purpose of having this
space. This cutout here, which was an optional extra for this car, so you could get like a
navigation unit or whatever to put on here. This is, as I said, a little bit over a standard din size, so
it's going to fail a bit on our vents, but it could still actually work like that. So we've just got
to work out exactly how we're going to mount it, but in there would be ideal, because then there's
still room for a stereo down here, or down here, which tucks it in really neatly, and then up the
top we have our stereo instead. So we've got a lot of options, being that we have so much space.
Yeah, cool. Maybe we should run some thinking music, Martin, while we like sit here and have a think.
Should we do that? Sounds good to me. So with the thinking music playing, that is exactly what we did
while we worked out where we could install the new dash. At least with everything gone from here, we
can kind of see where it sits best. We're doing it right, aren't we, Martin? We're putting the most
important stuff first, and then we're going to make the rest of the car fit. Like, take out all
the controls, take out everything, and then make it fit that. I think it'll be worth it. I just think
it looks really good when it's, like, installed flush properly, rather than just hanging off
the end. Oh, cool. So that's all the real estate we've got to work with. So that's a matter of
making room. Of how that goes. So that needs to go up, and the thing is, behind here is just a bunch
of plastic. You can even see your fingers on the other side of it. Yeah, so there's just a bit of
plastic there, which I reckon we trim out. I'm just going to cut that. An air hacksaw is perfect for chopping
plastics, and after that, we'll be using our new Ryobi rotary tool, which is excellent for this kind
of job. Just don't forget to use your safety goggles. Got my RX-7. What? Rotary tool. Okay.
To anyone who's freaking out about the amount of butchery that's happening to this dash right now,
just remember, not only are these cars at every wreckers these days, we've got a 3D printer.
Everything plastic can be fixed with a 3D printer. And let's be honest, like, these cars are worth
nothing because no one wants them. Like, except for you, really. Me and quite a few other people, thank you.
A few people that are firing up. Shout out to my liberty friends. I mean, they're firing up right now, but relatively
speaking, no one else wants them. So they're cheap. Because a lot of the time when we're making these
videos, a lot of people, they do get upset about the purity, Martin. Because they're like, you wrecked
the purity of that car. But I would say the purest car is the car that is done the way that you want
it. Or the way that you want it. You know what I mean? Who wants purity if you don't want it? Yeah.
It's like someone going, this is pure milk, but you don't want that. You want a milkshake.
Or chocolate milk. Would you rather drink pure milk that you don't want or milk that's got stuff
added that's more delicious and whipped up with ice cream? Oh, well said. You know what I mean? Yeah, man.
Anyway. Like picking up what you're putting down in your ice cream truck. You're blowing my saxophone. I'm blowing your oboe, man.
Yeah, this is not the recommended way to install it, is it, Martin? What are you talking about? Of course it is.
This is our way to install it. This is the way to install it. This is not what it says in the
instructions. What are you talking about? It's meant to go up here, man. No, it's not. It's meant to go
over here. Dude, put it in your back seat if you want, so your passengers can see how sick you're
doing at the track. No, I mean, that's true. But I'm just, like, I'm concerned that people are going to
be like, oh, do I have to, like, get a rotary tool and cut this? And then do I bend that? And then do I
grind that? No, you don't have to. Have some faith that when you see this finished, you're going to
think, that looks excellent. I'm so glad we went to all that effort and didn't just put it on our
dash. Oh, I have total faith. I just, I don't want people to think that this is the way it has to be.
Oh, this ain't no how-to. No, this is not, this is not a how to put your dash on. This is not how-to, this is I do.
Oh, but look, dude. That's really good. Thank you. Thank you for believing. So I reckon that'll, I
reckon our, um, our plastic covered, uh, thing should, should go in there still. Except that I bent it.
But it'll go in there, sort of, somehow or another. Let's not concentrate on that just too much right
now. And then that will fit up in there. It's going to work, dude. It's going to work. I'm getting
excited. Are you excited? Yeah, I am. I'm excited. And you don't need the little taco at the top?
Nah. That's, that's got like, um, you can use that for warning lights, but it actually comes up
if you set a warning level. Because people might not be able to see it. There's lights along there
that would normally be visible. Um, but they're going to be kind of up under. You can put blinkers
and revs and stuff. But again, it's, there ain't no race car that I need to worry about that. And
also for warnings like temperature and fuel pressure and oil pressure, you can blink warnings
up. Customize it. We're going to go through all that. Okay. So the air con unit is back in there.
Subaru people, why is this on two little noggins so that it can do that? Is it so you can change
the angle? No, because there's fascia. There's fascia. I don't know. Why does it do that? Why
do they call it a fascia? I don't know, Martin. There's fascias on houses too. Look at that. That's
going to look nice, man. A little hidey hole in for it. So now what we've got to do is adjust this
to fit, basically just fit over it. So we're going to widen that out so we can get to our buttons.
Yeah. And we'll probably remove our hazard switch elsewhere. We've got a whole lot of other dash to
go in. We can move that too. So we'll remove that, chop it out if we need to fill that in. And that's
the plan. So we might make a little template actually, so we're not messing around with our
dash too much. That's a good idea, Martin. Make a template out of some, what is it called? Computer-aided,
no, cardboard-aided design. CAD design. That's the thing. I borrowed that from
binky, I think. Anyway, that's going to go in there. So let's, let's get chopping.
Cut a fair bit of strength out of this. I'm just getting the rough shape first.
Being that there's got the hazard switch in there, I'm probably going to have to repaint the thing,
but that's okay. Just to kind of get the shape. Now I'll grind out the details, the fine bits,
and hopefully that will just sort of fit nicely around the screen when it's up in the dash.
And the good thing is, Marty, is that if there's any problem with this, we can have as many goes
as we like, because the wrecker down there has these parts for like a dollar. Yeah. With a whole
lot of hacking behind here, it looks like it's all going to fit in. If there was no hazard switch
there, that would just be done basically. The hazard switch just means we have to sort of
fill it and shming it a bit more, but I'm very, very happy with how that's sitting.
I think that looks great. That looks really good, man. Yeah. Worth a bit of extra effort,
I think, to get it right in the dashboard, like it's meant to be there. The cut around the bottom
is good. Hacked. Yeah, hacked is the right word. We fill in that section, and the only thing we
don't get is the little bars across the top, but again, we don't really need it for this car.
We'll save that for our beep. What? The BMW. We'll save it for the beep. BMW drift car.
I'm just doing the beep myself to save me having to beep it later, or you having to beep it later
when we edit this. But I just said the BMW drift car. Yeah, but I beeped all of them. No. Yeah.
No, you didn't, because I'm editing this one. There's a couple of different ways to connect
the dash into your car, depending whether you're running the Haltech or you're running a factory
issue, whatever it is you're trying to do. They give you a diagram, which is really cool, that
shows you what each one does. You've got the CAN bus basically uses like a CAN high, CAN low,
power and ground, and you can see that here. CAN supply, ground, CAN high, CAN low,
and that's like a little network, just like a computer network, that everything talks to each
other, sends data down those wires. So we are going to, rather than pull everything apart,
because I've already got a dash in there, I can recycle the wiring that I've already got.
All I'm going to do is hack the plug off for the old dash, and they actually give you pins,
so you can rewire this plug into the back of the dash, which will save us heaps of time.
If you're running a brand new one, you just use the wiring that comes with it,
which is that. Send it from one end from your ECU and the other end into the back of this cable,
which is like a little thing like that, a little tail on it, and away you go.
But for us, it's going to be even simpler. Chop, pins, done.
All right, Martin, we got the plugs, they're ready to go. Now, Dave, the legend,
Wiring by Dave, left us a message saying where the wiring had to go. So this is what we've got
to do, Martin. Listen up. Black is white is high, green is ground, red is power.
Thank you, Dave.
What a legend.
All right, Martin, it's time.
Some people love these things.
Some people leave these on because they think it's protecting stuff, but in a lot of cases,
it all heats on and then actually wrecks the thing you're trying to protect. So just take it off.
So we plug that in. This little plug at the top is USB, we'll use to program it. But for now,
let's just see what happens if we do that. And because we already have all the Haltech
gear in the car, it should just turn on.
Turn the key, Martin.
Three, two, one. Yeah, dude.
Woo!
It worked.
Very cool.
Well, something happened.
Well, no, it can't be.
There it is.
Look at that.
Well done, Martin.
How good is it?
That's really cool.
We've got a whole bunch of things already set up on this screen, which is cool. Coolant
temperature, which is just above ambient. Air temperature, which is probably quite accurate.
Fuel pressure, trims. We've got air-fuel ratio, what gear we're in, speed. That will just work.
That's awesome.
That will just work straight up.
So you go over here, Martin.
I change pages here.
This is your brightness on this side.
Yep.
Here, blip, blip, blip, blip, blip. And you can decide where all of this sits. Like,
you can fully customize this, including different looks on your laptops.
That's right.
But there's also different styles. Like, look at that. That's just a full data readout.
That's pretty cool. And that one, you'll be able to configure. So there are a few
things I'd like to put on there, but that's the old school looking one.
So it looks like that.
That's cool.
Awesome. You can just scroll through. And that's the twin dial one. So that,
if you had it up here, would be pretty cool because you'd have your speed and your taco.
Yep.
Oh, that's awesome as well. Very cool. Check engine lights, battery voltage, speed,
throttle position. Really good for sort of configuring stuff.
Oh, I like that one. That's cool.
Yeah, that's mad. So many options.
Very cool.
You can go through and fine tune that on the laptop, which we will have a go of later.
But that's the default one. I think between that and that one,
that's where it's at. Yeah. In terms of how useful that is.
The dash is wired in and it works. So now we're going to tidy up the plastic surround
with some filler and paint. So it looks factory.
This is just a matter of gluing in some support material,
applying some filler and then sanding it back.
We've made up some metal brackets, which will attach to the dash using the included screws
and then screw that into the dashboard support itself.
After a quick test fit, we can remove the trim and apply some low gloss black paint
to match the existing plastic trim and then leave it overnight to dry completely.
With that done, the dash and centre console can go back together.
We've also extended the hazard switch wiring, which we're going to relocate to the centre console.
Now we can customise our display using the included software
to show the stats that specifically apply to Super Gramps.
In this case, we're looking for boost, exhaust gas temperature readouts for each cylinder,
intercooler temperature drop, oil and fuel pressure,
gear, check engine codes and just about anything else we can cram onto the screen.
We can also customise the labels for each reading.
After a quick tidy up, this install is done and dusted.
So there it is. That is our custom install of the new Haltech IC7 in Super Gramps.
You've done a great job, Martin.
Thanks, Ben.
Well done.
I'm really happy with how it looks. Thank you for your help.
I'm happy with how it looks.
There was holes in the dash for such a long time
because I was just hoping that one day there'd be a mad screen
that could display all that sort of stuff that's really handy
to be able to see when you've got a car that's doing what this is doing.
There's only one more hole to fill, Martin.
The big one down there.
Oh, that one.
Yeah.
For the stereo.
Yeah, for the stereo.
We'll get to that.
We'll do that later.
There's only a handful of things.
Not even. There's like two things left to do on this car.
Don't say it.
I know.
Until what?
We're soaked. Until it's...
Don't say it.
The D word?
Should I say the D word?
What's the D word?
D for done?
No, F for finished.
F for finished.
It's not going to be...
Did you say a couple of things until it's finished?
A couple of things until it's...
It's not going to be finished.
Well, finish the list of all the things that I've wanted to achieve with this car
and we're getting very, very close.
I'm really happy with it.
Love the dash.
Love all the way everything's working in there.
It's looking good.
Sounding good.
Put it away, man.
No, I'm just reminding our friends.
There's two things to talk about.
Okay.
Neither of them are to do with this book.
Okay.
But I apologize on Marty's behalf for throwing this book last week.
No, I threw it.
I'm apologizing on your behalf for throwing the book last week.
But I don't apologize for throwing it.
No, I'm apologizing on your behalf.
But I don't want you to.
But I just did.
This is super awkward.
So there's that.
And also, so there's that.
That's the first piece of news.
And the other bit of news, as you probably saw in completely unrelated news,
but also important is, as you know,
Marty and I are beginning a plant-based diet.
Oh, not this.
No, no, no, don't go away.
We spoke about this, man.
I got you something.
You walked home because of this.
I know, but we're not actually beginning a plant-based diet.
Thank you.
But we're doing it for one week.
What?
And by we, I mean I.
But I got Martin, because I know you hate broccoli, right?
So this is a broccoli chip.
I don't know what I'm finding in here.
I know this is the wrong show for this.
But from what I understand, this is like full pieces of broccoli
that have been chippified.
Oh my God.
There you go.
It's going to be delicious.
And look at this big one here.
So there it is.
It's a broccoli chip.
Smell it.
Smells like old plastic.
That's really good.
That's excellent.
Oh, it's fish.
It's fish flavor.
That's bad.
Here you go, mate.
Oh.
Oh, it's still in my mouth.
