Step Turning With Simulation | CNC Turning Program🗜️💻 | Learn for Dreams
2 Video Views·Sep 20, 2024
say goodbye to boredom. Today we will see a cnc program for step turning. This is the given
diagram. The horizontal axis is z axis and the vertical axis is x axis. First of all we will
mark all the points like this. Now we will see a 2d simulation. Keep this diagram for reference.
This is the given workpiece. This is the layout which we want. So we need to remove this part.
Now while removing this part, keep in mind that we have to keep the depth of cut 0.5 mm.
So 1 mm material will be removed from the entire diameter in one stroke. Okay so let's start and
see the path traveled by the tool. First of all we will take the tool nearer to the workpiece
and then slowly move the tool to the origin.
Then we will take the tool here and start removing the material.
Now we will start removing material from here. Again tool will go to the home position.
Then the tool will remove the material from here.
Again tool will go to the home position. Now let's find out the coordinates for each point.
So these are the coordinates. For 0.1 it is 0.15. For vertical coordinate we consider the entire
diameter. For 0.2 coordinates are minus 13 and 15. Z coordinates will be negative when cutting
operation is being performed. Because Z axis will be negative in the left and positive in the right.
So 0.3 coordinates are minus 13 and 18. For 0.4 it is minus 30 and 18.
0.5 it is minus 30 and 22. For 0.6 it is minus 50 and 22. And 0.7 it is minus 50 and 25.
Okay now let's start with the actual program.
Program will remain same as N00, G21, G28, G71, G90 and G94.
Here G21 is turning center, G28 is home position, G71 is metric mode, G90 is absolute programming
and G94 is speed rate in mm per minute. Then N02, M06, T01. Here M06 is tool change
and T01 is tool number. Now N04, M03, S1200. M03 is spindle on in clockwise direction
and S1200 is spindle speed in rpm. N06, M08. M08 is coolant on. Then N08, G00, X27, Z10.
G00 is rapid positioning. We call the tool nearer to the work base.
Then we will take the tool to the origin. N12, G01, X0, Z0, F150. G01 is line interpolation
and F150 is speed rate in mm per minute.
N14, G01, X25, Z0, F95.
Then we will reduce the values of X from 1 mm. We will cut the layer like here.
N16, G01, X24, Z0. And N18, G01, X24, Z-50.
And again we will take the tool to the home position. N20, G01, X27, Z10.
Again we will come to the next layer that is N22, G01, X23, Z0. Cut that layer.
N24, G01, X23, Z-50. Again we will go to home position.
This process will continue till we get the final design as per the requirement.
You just need to change Z and X values.
Jab hume layout mil jayega toh hum coolant bandh kar denge aur program tape ko end kar denge.
For coolant off, we use M09 and M30 is used for end of program tape.
So this is how your entire program looks like. Program kaafi bada dikh raha hai.
Par yaha pe sirf X and Z ke coordinates change kiye hai.
And we have considered layer of 1 mm. Aur layer wise material remove kiya hai.
Okay? Hope you enjoyed learning. If you find this video useful,
then hit the like button and share with your friends. Also subscribe to the
channel Learn For Dreams and don't forget to hit the bell icon.

