Budget Yaris Gets BOOOOOOST // $169 eBay Turbo (Will it go or will it BLOW?)

Ex Used Car
15 followers
Last episode of Mighty Car Mods we turbocharged Yaris Hilton with a turbocharger that we bought off ebay for just a hundred and sixty nine dollars and today
We're gonna make it run properly
Welcome to another episode of Mighty Car Mods. You wanted it. So here it is everybody Yaris Hilton. Wait, who wanted this?
Uh, I don't think anybody does but we're doing it either. What else are you gonna put a hundred and sixty nine dollar turbocharger on mine?
Big block 1.8 liter Toyota Yaris, which came with a 1.3. It was slow. It was crap
It was slow around the track now
It's fast around the track because we big blocked it and then we put a cheap really cheap turbo on it
And um now hopefully it's gonna be fast except doesn't run yet. Luckily our friend Dave is here. Yo, hey Dave
How you doing man? Good to see ya
He's the wiring guru from Haltech and he's gonna help us actually make it run because as you probably saw last time
We've got this incredible little hack down here Dave. Look at this. We cut up the airflow meter. We use some super glue
I mean, that's some quality work right there. Anyway, we did get it running enough to say that the turbocharger was spinning
It's getting oil, but we've actually got to make it run
That was weird. We've actually got to make it run properly and that's why Dave's here exactly
So we've got a few things to do
When you add air you've got to add fuel and you need something to control it. The factory ECU is not capable of it
So we're gonna do some hacking to make it work
To make sure there's enough fuel to make that engine an absolute weapon and then of course today
We're gonna find out exactly how much power it makes and don't forget. There's a wager on this
My good friend I think has guessed 128 kilowatts of the wheels
I have guessed 115 kilowatts of the wheels and of course the winner gets
5,000 rupiah. So come with us on this magical journey. We're turbocharging a Yaris. Why? Who knows?
A bunch of our mates have come over to help
But once they saw what we've done, they decided to go watch vloggers buy crashed supercars instead
Make sure you rate comment and subscribe guys
Luckily, Dave has stayed around to help us sort out the wiring and Marty is remaking some intercooler piping
So we can add an air temperature sensor
If your car has a reflashable ECU that is by far the cheapest way to accommodate your newfound boost
We don't have the ability to do that on this particular car. So the next cheapest method is a piggyback ECU
This is where you keep the factory computer in place
But hand over the job of fuel ignition timing and boost control to another computer while the factory one does idle air conditioning and other
Boring stuff in this case. We're using a Haltech elite 750
We can connect our injectors ignition coil and engine position sensors to it and we can then plug in a laptop and make it all
work
We can intercept all the required signals at the factory ECU and then run some new wiring for air temperature sensor and boost control
We can then run a hose to the ECU for vacuum and boost then crack out the laptop and tell the software what kind of
Engine it is and try to get it to run
With all that done. It's time to start the car or try to anyway
The factory ECU and the Haltech are battling it out for control over the engine with a few settings tweaked
We reckon we've got it figured out
Yeah, check engine light. Awesome
Now we know the computers able to run the engine we can get started on the next stage of mods
So a little Yaris runs absolutely awesomely
Yep
But we just want to make sure that it's actually going to keep running and nothing is holding it back from making the maximum
115 kilowatts at the wheel
I've got repairs on the line, man
You do 5,000 of them, which is worth quite a lot in Australian dollary dues
So we are replacing the injectors which are down here
We're also going to take out the spark plug so we need to do replace those and then Martin
I do believe you're putting in a fuel pump
The Haltech went in really easily
I'm actually a lot simpler than I thought it was going to be because we're just running our
Fuel system and ignition system. We have to tell the Haltech where the engines positioned and that's about it. Luckily the
Corolla ECU is dumb enough that it goes you can use my pedal
Because the pedal the e-throttle is the reason why this is tricky because it's got the electronic throttle and that usually goes
It's like driveline protection. It's
It's emissions. It's idle. It's all these other things where the pedal is just like no. No, you can do what you want
Yeah, it doesn't know that computer still here and still plugged in but doesn't know what the engines up to
Yeah, it's like someone's just put you know
They put like a couple of blankets under a quilt and it looks like someone's sleeping
But they're not because they're outside doing burnouts in the street. What exactly? Okay. Okay. Okay good. So
They get my cable ties then they're the Mighty Car Mods cable ties good. You want to fix up your mad car
Here's a message from our sponsor us
We've got Mighty Car Mods cable ties and Mighty Car Mods gaff tape, cloth tape, duct tape, duck quack tape
No, whatever you want. No, does it goes in ducts? No, no, dude
It's not duct tape. We've had this conversation. Dude. It was used originally in the military for doing underwater applications
It's called duct tape because it can go on. Anyway, we don't even need to go there
I'm gonna see what kind of spark plugs in here because we're gonna need different ones probably
Am I in your way?
No, man, I'm just enjoying the intimacy. Yeah, he's got two people in the front
So what is that? That's a snail mate. Is there actually a snail? Yeah, it's a legit snail down there
What's hanging on? What's that? Maybe you move that? No, it's because that's in the way. It's um, because the fuel rail still connected
It's over there. Oh, yeah, there's a snail down there. Not the snail that we put in there. How a snail got in there?
Don't know mate. Don't know. Dude, it was meant to be. This engine was foreshadowing its future
Yes, it was. Because there's a snail. There is a snail. And we put a snail. We did. Whoa double snail
Anyway, let's talk more ado
Luckily for us the injectors are mounted in the same way that you see on most JDM cars
Not so lucky is that they are also a fairly unique design, which will require some extra parts to make work
What we found as we continue working on this engine is some parts are so loose. You don't even need tools
It's just finger tight
We're replacing the spark plugs because we have no idea how long they've been in the engine whether they've been put in properly or what
Condition they're in our suspicions were correct. These spark plugs are looking nasty
Meanwhile, our upgraded injectors don't fit. Yay. So Marty's chatting with tuning fork about finding another solution. Thank you. Good, sir
I'll let you know how I go
Thanks, bud. Hey
There you go. So our injectors that we got
Basically just don't have that extended tip. Yes, we probably should have pulled them out first
But we're so busy trying to get the car running. We didn't really get around to it
So that's a surprise same as Evo 10
Apparently common in VW's and Porsches and BMW's as well
So it must be a bit of a euro thing to get the fuel injected further deeper down in the port
Wow, they're tiny. Look at that. Look how black they are. They're tiny, 14mm, but just black. Look at them. So we'll replace them
Yeah, cool. We're getting somewhere. We are. They're long too. They're really extended as well
So this is a bit of a magical mystery tour, isn't it, with these? It is. So I mean I ordered the wrong ones
But it's not a bad thing to have them in stock because they'll fit heaps of other things. Yeah
Because it's a standard. What Scotty was saying on the phone is this
O-ring and this O-ring are a standard size that fits like most cars
Yeah, cool
It just wants the fuel squirted further down into the port. The common garden snail has a top speed of around 45 metres an hour
Making it one of the slowest creatures on earth, but that's still faster than our Toyota Yaris
Okay, so status update is we have to replace the spark plugs because they are completely shagged and our injectors don't fit
That's right
So I got full-size injectors because that's what most Toyota's use
But when this engine came out it was a generation change that meant they started using
Extended tip injectors to get the fuel further down into the ports
So that's a bit of a bummer because these won't work
But we'll keep these around because there might be other projects that that will work in so we've got to get ourselves some injectors
From somewhere. Which we could just pull out of your Evo. Dude. Because it's right there and that actually gets this working
Have to beep it now we have to beep it
There's some other stuff we can get along with including putting the front of the car back together and also
Evo 10
Evo 10 is probably gonna need a
Fuel pump because we're putting big injectors in we might as well put a pump in it's lazy not to so we're just gonna do
It because laziness is not good. Yeah, so you do the fuel pump. Yep. I'm gonna put the front end back together
Yep, and then at least the car is kind of complete once that's done
Hopefully we get some injectors in get the spark plugs in put it back together
115 kilowatts people our arm our front driver's side driveshaft is also totally boned and the actual shop that the thread is all stripped out
Okay, so I don't know. It looks like it's been taken in out a few times
We actually haven't taken out of the hub before that
I remember so I don't know if that was us or maybe it was us it was us
I seem to remember bashing it very hard with a hammer that could be why
So I've got another one of those on the way as well
So we'll stick a new driveshaft in it which means we can't drive it
So we got to put all that in before we can drive it we can start it once we get our stuff
All right, let's cue some
Classic mighty car mods tunes and just get to work. It reminds me of the old tune while Marty investigates the fuel pump
I'm gonna put the front of the car back together ready to hit the street
It just occurred to me that to put the spark plugs in and out
It looks like you actually may need to remove this big flap each time
Because the spark plugs are buried so deep in there
It'd be hard to get the tool in there to actually get them out
So we're actually not gonna put that back in but I'll leave it sitting there and I will just do
The rest of the front end and then show you what it looks like when it's all done because it's gonna look
minty
Delicious the front bar is going back on for the last time held in place with half a bag of cable ties full JDM legit
Meanwhile, I'm getting rid of the back seats for the friends
I don't have so that I can access the fuel pump and we can see if it's up to the task of our new turbo conversion
We actually should leave these out man. We'll drop like
Dude, this is so heavy. I can't lift it by myself
Really? Can you help me? Yeah, you should see how massive this seat is dude
It's like the biggest like for a little hatchback. Oh
Far as detailed why so much going on because you can fold them forward flat down
You can do all and you can move them back and forth when you're in the back seat. Okay, that's like genius, but
You get through the hole I
Reckon if you really really yank on it from the front
Is it gonna fit through? I just do it by myself. Yeah, you can watch. Oh
Dude, you smashed it careful. What's the juke? Oh
How much do you reckon that weighs like 35 kilos 40 kilos 40 kilos, I reckon
Yeah, we're gonna save some bulk truck time. We've got a lot of seat. We're leaving it out
Yeah doesn't need to go back in there back seats for a waste of time
Unless yeah, hey, you know the only problem of removing the rear seats is you can't take your mates anywhere with you
We don't have any mates anyway
You know, you're modifying a car you really care about
When you're using chicken scissors to cut it up to make way for intercooler pipes, don't you man?
The important word you use there was intercooler. I thought the important word was chicken scissors
Why are they called chicken scissors because they cut chickens up with them just back to snails for a second
Did you know they can live up to 25 years old?
That is unless of course they're being eaten at a French restaurant where they are considered a delicacy called escargot
And that's why Nissan made a car called an escargot because you guessed it
It looks like a snail keen viewers may have noticed that the Yaris and the Corolla both returnless systems
Which means you've got one pipe from your fuel pump back here to the front. You don't have a return
It's not constantly cycling fuel. That's a problem
When you are adding turbos and things because you can't add a pressure regulator which brings up the fuel pressure in line with the boost
Pressure so the boost pressure isn't like fighting with your fuel pressure and essentially dropping it
What we are able to do though, because we're using bigger injectors is we'll be able to
Make up for that in the fuel map using the Haltech
So we just basically open the more and add the fuel that the regulator otherwise do it's not a perfect system
You can turn this into a return system
Which is one way of doing if you want to do that for the kind of power level
We're aiming for though. This will be just fine
Much like a Golf R the pump assembly is held in with a big threaded ring
It's done this way
So the one unit can accommodate the charcoal canister fuel pump fuel filter and regulator all in one unit a clever design
But not boost friendly
We're hoping we'll be able to replace just the pump for greater fuel supply and leave the rest of it as is
It's gonna be a perfect fit Martin. No, it's probably not perfect
See how this one's twice the size of that one is that anyway denser fuel pump, man
There's a whole lot of new stuff going on, isn't there? There is. Oh, well guess this. Yeah, it's not gonna be fast
I'll just put this one back away then
Won't be needing that one. We'll save it for next time
So there's modern generation stuff
I just want to do a little recap so far that um
The spark plugs that we don't have don't fit because we don't have them
The injectors don't fit the fuel pump doesn't fit but I've put the front bar on entirely with cable ties
Because all the screws and stuff that we're in it. They don't fit. So we're doing well
We're doing great. But you know what? It's not gonna it's not gonna get in the way of us having a good time
Pull the fuel pump out completely unnecessarily
Waste of time. Do you want to try and get one of those or just gonna send it they don't exist
I've never I've never seen it before man, and I shouldn't say they don't exist because someone will say yes they do
But I've never seen it before
While Marty solemnly puts the factory fuel pump back in I've picked up some fresh new spark plugs to replace the old festy ones
First thing I have to do is carefully gut them down and then I can stick them in the engine
Our next task is to remove the old driveshaft. It's been in and out so many times that the thread on it is completely maggot
With the old shagged driveshaft removed now, we can install a crispy brand new one. That is pineapple fresh
With the new driveshaft in we are all ready for some boosty front-wheel drive skids
So now we can move on to reinstalling the front of the car and getting it finished
It turns out you can buy injectors out of some kind of weird euro car that can be made to fit our Toyota with a
little bit of hacking and some adapters
They clip onto the top of the injector and then they fit perfectly in the factory rail of our 2ZR engine
They require some new plugs, which are an easy swap onto the factory loom
So now we've got 600 cc of injector, which is around double what the engine came with standard
All right, everybody. So we're done. That is the
$169 turbo conversion total cost
$169. Yeah, right plus the weeks and weeks of time and staying up late at night trying to figure stupid
It's like mr. Toyota doesn't want it to be turbo
It's like they were like we're gonna make it as hard as possible for anyone to turbo our cars
It's just fighting us man. Yaris Hilton's fighting back. It's time to go for a drive though. It's time to try
This is the moment we've all been waiting for we don't actually know if it's gonna work drive to the closest cliff
Push it off. It might it might drive it might not I actually got no idea
Yaris Hilton is coming down and we're about to find out if our
$169 turbo is actually gonna boost
Random bolts come out. That's most definitely meant to be connected to something important
There's no tune in it at all. Okay. So currently the factory computer and the Haltech are sort of fighting each other
It's fine to put around and it idles really well, but there's no map in there for the load
So as soon as it sees boost, it's like having no ECU in there at all. It's just like what?
Yeah, it's just like what so um, but look we're driving it next up
It's a matter of putting on the dyno and actually
Trying to tune it trying to make power and trying to see if anything falls out of it because that could still very much
Happen. Yeah, that's what
It makes great noises. That's awesome. It's awesome
It's just once there's load on it
Like I can't accelerate past about probably 20% if I do it just starts to buck around because it's it's out of range
So it just needs a tune just needs a tune now and then it'll
possibly work
No idea. No idea if the fuel pumps up for it at all
5,000 rupiah wager Martin. It's
5,000 on the line. Nah, man
128 kilowatts at the wheels 115 kilowatts at the wheels. Yeah
100,000 I'm going there
That's how confident I am. This car's gonna make good solid power and be freaking amazing
128 kilowatts at the wheels
100,000 rupiah. Yep. Yeah, man. Oh my gosh. I would not be making bets like that man. That is a lot of money
Accelerate
That is what I'm talking about making turbo noises sounds sounds really good
It sounds amazing. I can't wait till it's tuning. We can actually drive it properly. All right, everybody. We've turboed a Yaris now
It's time to see who's gonna get themselves
100,000
We'll make it out to Haltech, won't we? Sure, and if we don't we've got a tow truck on speed dial. All right, cool
Let's make our way out there and get tuned win some bulk cash
