Lecture 04 : Importance of Unit Operations - Part 2

IIT Kanpur July 201
20 followers
Sep 13, 2024
Greetings, I welcome you all to the lecture of this course. And we will now be focusing
on what we had started in the previous lectures. And we will be focusing on the importance
of unit operations. And why is this so important? The main reason is that if we are having good
quality raw materials, we will be having good quality finished products. And the treatment
of raw materials of waste streams that we have discussed so far. The tree treatment
and the unit operations that are done initially right at the beginning, let us say after sorting
and classification. These unit operations hold the key to providing us better quality
raw material for other subsequent processes. So, in the upcoming lectures we will be discussing
on various types of processes for different waste streams. However, at the same time it
is very important to note that these unit operations that are done initially at the
very beginning of the process hold the key to giving us a good quality raw material.
So, previously we had discussed various types of comminution operations, crushing, grinding
and other operations. We will now continue on that and see how these operations help
us in achieving our target. Now, we know that waste streams require treatment. And by treatment
we need prior treatment for upgradation. So, that we are actually able to reach the new
recycling processes. We will now focus on concentration operations, which we had discussed
previously to some extent in the previous classes. So, the key idea is basically identification
of the waste streams and analyzing the key materials, as in materials that are worth
of extraction from these wastes. And what we can reuse or resell or recycle
bring back into the material cycle for economic benefit as well. So, it is not just bringing
back the whole material, whole waste stream back into the cycle. That would have, that
would be very much beneficial, but in reality one must understand what are the key materials
that can give us economic impact, economic benefit. So, analyzing the waste stream and
identifying the key materials. Now, this is also possible at an individual
scale task of hand picking. Now, we know that hand picking is one of the most trustworthy,
trustworthy method of identifying the raw materials. Once we have good idea about which
materials are really useful, we can simply hand pick them. So, there are some processes
that would involve hand picking, but of course, we know that this is a very challenging task
and intensely it is heavily labor intensive process. And it involves lots of skills to
identify and hand pick the materials that are economically important and which could
be brought back into the material cycle. So, the task of hand picking, the quality
of the separation is high, but we know that is very tedious operations. So, very tedious
operation, one should have lot many skilled people to help us in the hand picking operation
and many a times it is not very safe. Waste streams could be contaminated with very, with
large variety of different waste streams which could be hazardous for human exposure. So,
although it is a good way of separating, it is not always recommended.
So, we know that wide range of wastes are present with the given waste stream. What
this means is the chance of contamination is very large. So, we know that hand picking
is not the only way of concentration of concentrating our waste stream. We can go for magnetic separation
or gravity separation or froth flotation. These are some various important methods by
which we can help in concentrating our feed. And then we can work upon these raw finished
raw materials for further recycling operations. So, we will go ahead. We have magnetic separation.
So, we have to some extent discussed some parts of this process. We will try and make
a very simple diagram to understand how it really works.
So, suppose that we have two rolls and we have whole piece like this and we have the
other whole piece like this and we have a coil that goes about like this. So, we have
the coil and of course, the rolling is happening and we have various walls. So, let us draw
the walls in this system. We have the hopper, feeding hopper first product. Then, we have
so now, that we have our schematic done. Let us try to understand how material flows inside
it. So, we have the first stream of product coming in from this end and we know that this
is the raw material. This is our whole piece. These are our coils. These are our rolls and
what happens here is when it first comes down, first set of magnetic product, magnetic product
one is generated just after the first roll. But, what happens if it is not getting completely
removed? The rest of it comes down here and then we can have second product. So, we have
magnetic product two and we have finally, the non-magnetic product. So, we know that
this is a very simple diagram that describes how magnetic separator really works. So, we
have the raw material coming in. We have different rolls into which this raw material is coming
into and then along with this rolls and the magnetic field that is around it. Different
fractions of materials are separated based on how they are behaving towards the incoming
magnetic field. Now, what we see here is we have different
products, magnetic product one, product two and non-magnetic products. This is fairly
important in separating out the magnetic materials that the metals that behave to different
magnetic fields of different intensities. So, the susceptibility how they behave to
different magnetic fields is what we are expecting to target. Now, what we know is strongly magnetic
materials would require low intensity because they are already behaving. They are already
magnetic materials. So, would require low magnetic, lower magnetic forces or lower intensities
and high intensity magnetic forces would be used for lesser magnetic materials. Of course,
this could mean that we will be using high intensity magnets or electromagnets.
So, we will now continue on the separation and we will see another device that could
be used. So, we have electrostatic separator and we will draw schematic of electrostatic
separator. So, first of all we will have and then we need whole piece. So, this is
a fairly simple diagram that shows the separator and we have a comb electrode here. We have
and of course, we need from the center we need separating zone. So, this is our separating
zone separation zone. What really happens here is we are feeding this separating zone
separator with fine very fine raw materials and based on the electric fields that are
generated here and the magnetic fields these are getting separated into various fractions.
We will see how. So, suppose that we have we use different colors magnetic as well as
non magnetic. So, we have the non magnetic material getting collected in bin 1. The magnetic
material gets ejected right in this bin and some of the materials that behave that are
partially behaving in between would be collected in the second bin. So, if this is bin 1, this
is bin 2, bin 3, then we have 1 is non conducting, second one would be middlings.
Middlings would be carrying out both the types of materials and the third would be conducting.
So, it gets ejected very easily because of the effect of the comb electrode. So, comb
electrode provides the charge and it gets ejected very easily. So, since it is getting
affected it is getting ejected. The other materials that do not feel the effect of the
comb electrode these get still stuck and we also need a scrubber at the end because
of course, we need a scrubber. So, that it gets ejected. So, we have a scrubber scrapping
it helps in removing scrubbing and scrubbing the removal of the material that is still
stuck to this separator. So, that is getting ejected in bin 1. Middlings that are those
materials that are coming in the between. So, some of these middlings will be conducting
some of them will not be conducting, but then it is fine we have different we cannot really
have clear cut division of conducting as well as non conducting that is why we have the
middling bin as well. So, this is one another way of making our
material concentrated. Now, one of the key problems with both of these processes magnetic
separation as well as electrostatic separator we the most important challenge is the feed
size. The feed size of these processes is very less which means ideally they would ask
for a particle deep thick raw feed which is very difficult to achieve of after comminution
we can have wide range of particles and of course, we can try and reuse the coarser particles
for further comminution and bringing down the particle size, but achieving a very fine
particle size is going to require large energy large scope of working.
On the grinder unit because it would require the reinsertion of the finish product back
into the back into the raw material. So, that finer and finer fractions are achieved for
a separation into the. So, for separation using the magnetic separator or the electrostatic
separator because the feed size itself is very small and this is the first disadvantage
and the hourly tonnage hourly tonnage means basically the production the hourly tonnage
of the process is less. Since, you are consuming very fine particles the feed that can be actually
provided for efficient removal also goes down. So, the feed size is a constraint and the
amount of feed that can be used the hourly tonnage is also a constraint which is why
magnetic separators may not be may not be useful when you have larger sample size larger
feed size and larger quantities. Now, the next process that we can discuss and we have
started in the previous classes as well is jigs.
Now, these are essentially going to handle particles that are up to 2 millimeter. So,
nearly let us say 2 millimeter diameter of course, larger particles can be taken up,
but at least 2 millimeter diameter is what is expected. So, we have beds of ores or raw
materials and they are sitting on a screen. So, we have screens that have these beds of
ores and all of this is underwater. Now, what happens is partial suspension this is this
is the assembly actually this describes the assembly of the jigs. So, we have bed of ores
or raw materials in our case it is basically the waste stream sitting on screens and these
screens are underwater. What happens is we have partial suspension
at regular intervals. So, we have suspensions how does it really work what can happen is
the screen itself can move or if the screen is stationary we can have jet of water coming
in from the bottom the stream of water coming in from the bottom. So, that the bed itself
starts to vibrate. So, what it does is basically there is a there is a screen what jig really
means is there is a screen we have bed of raw material sitting on top of it and whole
system is underwater. Now, either the screen itself should vibrate or water inside if the
screen is stationary the water inside should be pumped in such a way that the ores start
to ores or raw material starts to vibrate and this is systematic and rhythmic.
So, one set of motion and the raw material is allowed to settle down then again and this
is basically periodic when this happens we know that the ores will get readjusted based
on their densities and how they behave in a medium and in this case the medium is water.
So, we have just discussed we will either have a movable screen or we will have a stationary
screen constant stationary or fixed. So, we will have a movable screen or a fixed screen
and the pulsation the how really do we describe this pulsation and subsidence.
Operation is done this pulsation and subsidence operation is done for separation what it does
is basically separation of light material on top and heavy material at bottom. So, we
have a light material coming on top and heavy material at the bottom and this helps in the
separation of the various raw feeds. So, jig is moving either jig is moving or the water
is being pumped and we have the separation of the light material and the heavier material
from each other and they get settled based on this stratification.
And what is continuously done is feed is being charged and light materials that are getting
settled are also being removed. So, the jigging process is a continuous process it is not
that one set of feed is provided and it is to be continued it is a continuous process.
So, light separated materials are removed and fresh feed is also added. So, that the
jig jigging process is continuously done. Now, we will move on to the next method of
concentration we will have the concentration tables this also we had discussed previously
concentration tables. So, in this we need to have we need to first understand what it
really means. So, we have a long table and along the length we will have riffles riffles
are basically the wooden strips. So, the design of this table is such that we can have riffles
either on the almost whole of the table or partially these riffles can just vary in length.
Now, these riffles are normally arranged along the length in which the table is designed
and there are mechanisms of including water. So, what happens is the if riffles are arranged
along the length the flow of water is done across the riffles. Now, feeding is done and
the longest riffles are usually on the feeding side and the width starts to gradually go
down on the product end. So, what happens is when we are feeding the
raw material these tables are shaking toward in the direction of the riffles itself and
water is being charged. So, there are 2 forces that are normally observed when we are seeing
the concentration shaking tables as we call them tabling process shaking table. So, the
table itself is moving and there is the flow of water we will see how really the particles
are getting separated out and how we are getting various types of feeds in this concentration
tables. So, we know that there are riffles are basically
wooden strips and of course, this table is basically lined with linoleum. So, these riffles
are present they are normally parallel to long dimension of table. So, along the length
these are arranged thicker near the feeding as I have just mentioned thicker near the
feeding and of course, it will gradually taper down at the other end water film how does
really water film flows water film it flows across the riffles flows across the riffles
and the third thing that is point 1 is the riffles point 2 the water there is water free
and the third most important the table itself is shaking action of table what does that
do this vibration cause the feed to stratify this is basically going to stratify the feed
and what really happens here is in all of this due to all of this what really happens
is light metals light materials reach the top top of what the flowing water and they
get exposed these materials get exposed get exposed to criss cross the cross current flow
of water. So, the light metals reach the top and they
get exposed to the cross current because the table is moving in one direction the materials
the light materials tend to tip off and they get carried away with the counter current
the cross current flow of water whereas, this is fate 1 option a the other option is if
the materials are heavy. So, heavier materials settle at the bottom settle at the bottom
and travel through the riffles. So, based on what do we wish to separate and whether
these particles have variety of densities the shaker table is an amazing device that
helps us in separating out these different particles one from the other.
The last and one of the most interesting routes that we would be discussing now is flotation
for which we would be needing a diagram. So, let us just quickly draw this is a simplified
diagram of flotation tank where we will have an impeller rotating impeller we have the
input of air and gradually we will see the flotation process what really is happening
let us just describe this building we have feed air supply and we have the rotating impeller
and this exactly is froth. So, what we are discussing is basically the
froth flotation process which which you must have come across if you have done I mean real
pore beneficiation course. So, now what really is happening is this impeller is pulling out
air and we have feed materials that are already fed into the bath. So, what really is happening
here is this impeller is pulling out air and it is charging it into the bath and it is
rotating. So, what happens is the air bubbles are generated and these air bubbles are picking
up the raw materials along with them and reaching at the surface.
Now, what happens at the top is these these bubbles are not normally stable. So, we have
different types of raw materials that are added on to this bath. So, that the froth
itself becomes stabilized what this process essentially does is it helps us in separating
out specific type of phase. So, normally it is used for sulphide ores, but at the same
time we can think of using it for separating out various different types of phases that
are present in the raw feed. So, air dispersion we will just quickly write
air dispersion air dispersion is done for bubble formation and floatable minerals reach
at the top. So, if it is going to float it is going to reach at the top. So, if there
are no floatable minerals they will they will would not float and they will eventually be
removed in the non floatable end. What are different raw materials in of course,
bubble formation is there and there is the separation of floatable minerals. So, we have
different 4 different categories of materials frothers basically stabilize the froth. We
have collectors which basically helps in collection of minerals in froth by basically changing
the surface properties. Depressors basically inhibits the flotation and then there are
regulators which basically balance the pH. So, where we have different types of materials
that help in doing this we have pine oil as a starting frother material that is very commonly
used. We can also have xanthates as collectors depressors we can have N a C N and for regulators
we can use N a 2 C O 3 sodium carbonate. So, these are different types of raw materials
that can be added on to this bath to make the whole process more efficient. And these
are the processes that are essential as unit operations for separating and concentrating
our feed and as we had discussed we wish to have good raw materials for finished good
finished products. These operations are absolutely essential for this. We will continue in the
next class. Thank you.
