Simple Beginner Cabochon Wire Wrap Pendant Using One Piece of Round Wire

Jewelry Making
51 followers
Hi everybody, this is Oksana and today I'm going to show you how to make these simple
little pendants here using a cabochon and only using one piece of round wire.
So you can use craft wire, artistic wire, I have some zebra wire here that I'm going
to be using and this is what the pendants look like and the back looks like this.
So if you want to see how to make this design, just keep watching.
So the wire that I'm going to be using today is just some round copper wire and this is
in the natural copper color from zebra wire.
So this is coated so that it doesn't oxidize and I'm going to cut myself a 15 inch piece
and then for my stone I just have a teardrop shaped goldstone cabochon and it is about
an inch and a quarter tall.
So what I'm going to do with my piece of wire is I'm going to find the middle of it by kind
of gently folding it in half.
Then I'm going to take some round nose pliers and I'm just going to bend it around the round
nose pliers like this and then I'm going to twist, sorry I have to hold it far away or
the wires are going to hit the camera.
You just kind of have to get in a groove of it if it's not working for you.
Sometimes when you twist the wires tend to, like one wire wraps around the other wire
instead of having an even twist so what helps me is just to have this nice kind of even
triangle like make sure that they're not like lined up or one is more straight and the other
is more to the side but make sure that they're both kind of equally bent I guess and then
just keep going with this.
This needs to be quite long.
So what you want to do to determine the right height of this is you put the little circle
right here at the top and then you bend it because your stone might be slightly different
than mine, it doesn't have to be exactly the same size.
So then you bend it so that you have adequate room for your necklace to fit through there
and then here on the back you want it to go down almost to the bottom.
So see I have a lot of space there, it doesn't go down to the bottom so I'm going to twist
more and it's a little bit less important here on the back because nobody sees it, you
know, the back so if your twist gets a little messed up but it's just here on the back it's
you know not quite as bad.
Okay so now it's going down almost to the very bottom, there's just a tiny space left
there.
Now I'm going to bend these wires kind of gently to the front and then here on the front
I'm going to just kind of look at them to make sure that, I mean I know the stone moves
around a lot so it's hard, but just to make sure they're not like completely uneven.
They're roughly coming out of the same spot there.
And what you want to do now is just kind of hold it with your fingers, take the wire,
I'm going to start with the right one and I'm putting it through that circle like this
and then same with the other one, just kind of put it through the circle.
So now I'm going to find kind of a nice center here, nice and centered, then I'm going to
take one of the wires and then the other and bend them both to the side and I'm just
making sure that my bail here doesn't move.
So this portion you kind of have to play around because your stone can like move a little
bit and your bail can move a little bit, so just play around with it to try and get
it nice and even.
And now these wires, they're in the back here, we're going to wrap them to the front kind
of making them go around the bail so they're going to the front and then back to the back.
So then here on the back, I'm going to trim them off, try and make that straight, so I
have these little ends here and what I'm going to do is just grab the little wire end, just
kind of wrap it around this back portion of the bail, just make like a little loop and
then close that loop up.
And same here on this other little end, make a little loop and then just kind of close
that loop up.
So basically all the wire ends are kind of hidden back here and then the wires here that
are kind of going around the bail, you can tighten them up a little with your pliers,
kind of bring them more together and then just take a look.
So mine got a little lopsided here, so this helps hold the little tip of the stone so
it doesn't wobble up here but then see how down here, one of these is a lot more to the
side than the other, so I'm just going to move the other one to make it symmetrical
and here's what we have.
And it's pretty secure in there and I have another one to show you that I made with just
a different color of zebra wire and a green stone.
So that is it.
Thank you so much for watching and I'll see you next time.
Bye!
