Making Bonsai from Difficult Rhododendron

Bonsai Artistry
5 followers
You must be wondering what's inside that bag but I'm doing a one-to-one
workshop with one of our customers and I believe this is quite a challenging tree so
Matt if you don't mind opening the bag. So what is it? It's a azalea or rhododendron?
Yeah rhododendron I think. Okay so it was growing in a rockery and I believe it's about 25 years
something like that. Yeah the beauty of this plant is the contorted branches and that very
thick trunk at the base it's got some movement but unfortunately the branches or the trunks
are too long so you must be saying this is going to be a real challenge and it is a challenge
so let's see what we make out of this. Okay so I'm looking at it and thinking about it
so here is the tree on the turntable. I'm going to turn it around to see
which is the nicest side. You should always keep an open mind but at the moment because
the trunk here is more visible I'm inclined to go for this as the front side.
So I will tease away some of the soil to see what happens.
So I just show you what Matt is doing. We are now teasing the other side which
we thought would be the back but if we prod a little more we will be surprised what we find.
There could be a thick trunk right below so all these roots which this plant has sort of
self-layered touching the ground if we cut it off we can probably find some nice thick trunk.
So we will tease a little more and I bet you there will be a lovely trunk.
Okay now let us turn around and see what trunk there is. I think we will have to get rid of
these. I'm not going to make gins with them. That very straight branch that's doing nothing.
No roots on that. You see how these roots have formed just by touching the ground.
So there's a clearly visible trunk like that.
Very interesting. So I'm revealing more and more trunk. There's another thick root coming from
there which is doing nothing. All these little thin branches I'm being careful not to remove them
in case I need to use it but these rhododendrons have very brittle branches so the chances of
wiring them are not that great but I will keep it nonetheless to see what I can make with it.
So straight away I have now produced quite a thick base quite a thick trunk.
A lot of woody trunk in there. Rockeries are a rich source for bonsai. I know not many people
make rockeries nowadays but back in the 60s and 70s making rockeries with miniature plants and
was all the rage. So rockeries which are still growing have this very
versatile use as it were. Dwarf conifers, dwarf alpines, dwarf rhododendrons.
So you can see that beautiful trunk up front. All that is trunk
although it's covered in mud. If it were jetted off you'll see the woody trunk.
All that is wood about two inches thick all trunk. So what we thought was the front in fact it could
be this side or that side is very interesting. This can now be the front rather than the other side
but of course if you put it in a round pot you can boil the tree from every side.
So this is where you must never just accept that just because the tree is
lying in a particular position it has to be that at the front. Not so.
All these fine roots I'm getting rid of because I know that there's a big trunk
and the big trunk has got more roots below that.
So all that is trunk, all that is trunk, all that is trunk. So it makes it look a more powerful tree.
So now it's just a question of finding what is the most interesting trunk line.
So will the fact that it's got a lot of root growing out of it affect the appearance of the
trunk? Will it bark up over time? It will bark up. Now we've only removed these roots which
laid themselves. See like these branches here they've touched the soil so they've
laid themselves. In fact you can make a new plant hole. Let me just cut this one off because I don't
think I need this one. You see all the roots on this one. This will make a new plant so you can
pot that up and you get a nice small literati tree out of it which we might well do. So we
won't waste anything. So that would make a nice tree on its own in a small pot. There you go.
Very nice. Okay so nothing is wasted, nothing is wasted. Now we've got to find the trunk line for
the main tree. If we get the right combination it will look very good. Now if you look closely
these two are crossing trunks and we don't need the two. One of them has to go and I think it's
quite easy. This is more interesting than the rear one. So we will get rid of the back one.
So it's all what we call method of elimination. Just by eliminating it step by step
the tree will emerge. Lovely flower buds on this tree. The branches seem to be very springy,
does that mean that if we do wire them as soon as we take the wire off it'll go back to where
it was? Well we have to keep the wire on for a long time. I think this low branch doesn't seem
to do anything. Another little literati. See they're all rooted so they're all going to make
individual plants. Ideally we want the tree that small but if I cut everything off it may not look
as if anything is live. So I'm going to keep some live stuff. Yes it was starting to struggle a bit
before it was dug out. That branch is quite heavy. Let's have a look.
So this is where we're getting to. So I'm trying to create a triangular shape.
So got a little more wiring to do. So let me show you where we've got to. We're removing some of the
very muddy clay soil, reducing the root ball a little bit. There are a lot of roots so not a
problem removing some of them. And look at it, look at this tree. This is the original front
which we thought didn't have much promise but it turns out to be quite nice from this side.
And we were working earlier on using this as the front. Even this is nice. So I'm now going to
wash some of the roots from the trunk, the soil from the trunk and I will reveal more trunk.
So I've now washed the soil from the top of the root so you can see all that complicated
massive roots. And let's look at the other side. This is also interesting. I don't think we need
that. This one? Yeah. No this. So what we thought originally as the front may still be the front.
It's quite nice this side. A lot of character on that tree. And once the tree fills out we can
reduce the canopy once you get more growth. But there's no growth there but it will come. Then
you can reduce the height a little bit. But the beauty is in that lovely trunk. And we're going
to now put it in a pot. So here we are. The final image of the tree put in its bonsai pot.
We chose an oval pot, cream pot to contrast with the more flowers. By no means finished. You can
dress it with better rock. And I think this tree looks nice from either side.
Either side is nice. But I think you see the trunk better from our original front. So you happy?
Yeah it's beautiful. So it was almost an impossible tree. Hard to believe that was basically a ball
of mud with some sticks poking out of it. It's become a tree. Okay great. Thank you.
