Big Changes for My Portulacaria afra Forest, Part 1, The Bonsai Zone, Aug 2025

Bonsai Artistry
5 followers
#bonsai #bonsaiart #bonsaitree #natureart #miniaturetrees #gardening #plantlovers #homedecor #relaxingart #beautifulbonsai #treeart #bonsaimaster #bonsaicollection
It's early in the morning. The lights are on in the greenhouse
and today I'm going to be working on my Port Ila Caria Afroforest.
Hi everyone, Nigel Saunders here. Today I'm going to be working on my Port Ila Caria Afroforest.
I'm going to be redoing the landscape and pruning up the trees.
Here is a look at the forest. You can see I've let the trees grow for the first half of summer
and I usually do this because it's a balance between growth and shaping. So I let them grow
for the first half of the summer to help thicken up the trunks and the branches and then I prune
them back and then for the rest of the summer I kind of maintain the form, increase the branching
and keep them miniaturized. This is a good way of kind of balancing growth and keeping the tree
shaped. When I initially made this forest, I looked up baobab trees on the internet and I
saw this landscape with the rocks and that and at the time I didn't know it was Kubu Island,
a very famous island on a salt plain and today I'm going to be redoing the landscape
using better rocks, a different composition and just trying to make it look more realistic.
I got up early in the morning because I know the work on this forest will take a long time.
It might take me all of today and maybe even tomorrow or even the next day
but I'm going to work away at it. It's always grown in this mica pot and I'm going to be
putting it in a ceramic pot so it looks even better as it shows. So I'm going to begin today
by pruning up the trees and then I'll start working on the landscape. The trees in this
forest are quite small. You can see there maybe the height of my hand so they're quite small
and I don't mind growing them larger but I've got to do it carefully and slowly. I have to maintain
the proportion of the trunk to the height of the tree and just grow it slowly so as the trunk
thickens the height can go up too. So I maintain the proportions of a mature
baobab tree. I'm going to start the pruning now. So on most of these branches I'll just be pruning
them back to the first or second set of leaves depending on which direction the leaf is facing
using directional pruning so when the new growth comes in it comes in in a nice direction.
So I will begin and I will begin on this branch right here. I have a downwards facing leaf right
here and then it has two side leaves so if I want the branch to cascade I'll prune it to
this downward facing leaf. If I want the new branches to grow left and right I would prune
it to these leaves above. On a mature baobab tree everything is highly tapered the trunk
the branches so yeah by letting it grow and clipping it back you start building good taper
in your branches and your trunk and sometimes it takes you know some big cuts like this branch here
is getting quite long without much taper so it may have to get hard pruned back
but I'll start with just kind of a trim and I'll take it off to the this left and right set of
leaves like that and I can always come back and prune it to these downward facing ones
if I decide to. In the end these ones I will prune to downward facing ones
keeping the tree quite compact. I leave a little bit of a stub for dieback
and that little stub will dry up and fall off eventually. There's a vertical one here
and I always recommend before you start pruning a tree to check your reference photos
look at the tree you're copying or the style you want and try and duplicate that tree
use it as reference. There's a very vigorous branch here very tall so I'm kind of pruning
it to a umbrella shaped canopy or a rounded form that's kind of the typical form baobab grows in
we call it the upside down tree because it looks like a root base that's exposed and
planted upside down or a tree that's planted upside down so you can see the form of the
tree is coming out already. I'm working on the branches at the back here now
and there's some branches back here so that's got the tree roughly pruned up
so now it's time to go in and look at the branch structure and see if I can
if there's any branches that need pruning away or further shortening
yeah just a kind of a careful look at the tree and see what's going on with the structure
so there's a lot going on with the structure it's kind of getting hard to see the branches
it's a little full looking there's a branch down here I can prune over here so I could be pruned
back this one could come back further this one has a bit of an upward growth here I'm not sure
I want to keep that hard to decide maybe this branch that's crossing the trunk line could come
off and I could keep these other two. I got my stub here and it just fell off there is some shoots
well there's one shoot back here I could reduce that branch way back if I wanted
but I think for now it's okay there's a branch up top here that I haven't touched
here one needs pruning that's too long take out my stub in the middle I don't think I want a
vertical branch here so I'm going to take that off just keeping the branch fanning outwards
so it's just a matter of looking at each branch one at a time and pruning it up
keeping in mind the profile and the direction of the branch and all the usual pruning rules
one branch dividing into two. I don't think I want this trunk line because it kind of
goes back in towards the center of the tree so I'm going to take that off. I have some branches
some new branches growing on the inside here I have to decide do I want that I don't think I
want this one it's the wrong direction this one I could grow it out but I already have two branches
here so I don't want a third it's not a bad location but you know it would grow out up into
this area I might leave it on for now it may replace one of these other branches someday
there's a branch growing back in towards the center of the tree here I'll take that out a
yeah there's a new leaf growing in back here a new branch that I don't want back here so that
comes off this one is getting too long here back this one I don't think I've pruned yet
and this one this one's getting too long and the tip off so I'll work away doing the detailed
pruning on this tree and then we'll come back and have a look at it I've been working away on the
tree and this branch back here it's kind of running parallel to this one it doesn't really
flow outwards and it kind of starts from the back of this branch so it's not the most attractive
branch in the world I've been trying to imagine what it would look like if I removed it and I
think it would look better it would kind of more distinctly divide the two trunks of this tree
and I think it you know this will take over as the leader of this trunk line and it'll give it
room to kind of grow in this area I think it's getting maybe a little too complex in this
structure here too so with that in mind I've decided to prune it off and it might kind of
leave a bit of a hole up here but that'll fill in I think I'd better get rid of it and
kind of hopefully increase the flow of the trunk line to something better
tough decision it bothers me though and it's not going to get any better I mean I could grow it
and it would kind of heal this wound here a bit and the direction might look okay in the future
it would expose the trunk behind it it's kind of almost a triple trunk this tree
what to do what to do I think I'm going to remove it so here I go this is a
big decision and a big cut so here I go it's done and out it goes
and how does the tree look now I think that looks better it is a little empty up here but these
branches will fill it in yeah I think it more distinctly divides the trunk lines up
oh a big decision here's an overall look at the tree now so I still have a little bit of work to
go on it sorting out some of these branches here at the back and if the branch is too crowded you
can use you know partial defoliation get rid of some of the leaves and just clear it out so you
can see the branch structure a little better there's a big stub here I can remove now a big
stub in here I can remove I'm just cleaning up some of these wounds just taking the stubs off
back to living tissue they're kind of scabbed underneath this stump this stub now it's looking
a little flat top so I need to reduce this branch back it's a little too tall does need to come back
that branch so I'll have to do a harder prune here so here I go take the whole top off there
there's a branch coming off here that's kind of growing across the design of the tree I can take
that out clean my stubs up here this is still a little tall here I'm going to have to prune it
back a little harder there I go nothing better now this trunk line here it's getting quite tall
without much taper so I think it needs to be hard pruned back so here's that branch here
if I prune it back it's going to open up quite quite a hole here in the canopy but
yeah it's just getting too long without any taper it has some movement it's been pruned a few times
but it could be improved I do have a branch coming out the back here be nice to get something coming
out in this area there's a lot of segments here which are potential sites for new branches to
develop so do I take the top off I think I'm going to leave it the reason is now that this
is getting really good light there may be branches that develop off of the trunk line here and then
I can prune it back later if I prune it off now I don't have much coming out the front of the tree
and I think it would look a little strange for quite a while there's a branch in here
crossing everything I can take that out this one's shooting up vertical I'll get rid of that now
this area is getting too high here too I think I'll take off the one coming forward here
at least I'll shorten it back keep the branch this can be reduced back branch is okay I think
I may have to grow this up just a little higher here in this area
to kind of smooth out the curvature of the canopy this one's growing back in towards the center of
the tree I'll get rid of that and here I've got two branches growing from one spot I definitely
don't need this one and the other one I don't think I need that one either it's coming off
that helps helps clean up the structure there's one in here getting quite long
needs to be pruned back it's gonna be pruned back there's a branch I missed down here that's
hanging down it's getting there it's getting better I think I still have some work to do on
the back of the tree I'll just rotate it around and work on the back branch here
this branch wasn't getting a lot of light okay that's sorted out a lot of the structure at the
back of the tree here's a look at the largest portulacaria afra it's looking more baobab like
I think the structure of it so I'm happy with the pruning I'll prune up all the rest of the
trees in the forest and then we'll come back and have a look at the planting and then I've got to
make some big decisions on what pot to use how big and heavy I want this landscape how many rocks
I'll be using yeah there'll be a lot of decision making on this forest here's a look at the main
tree from above so you can see I've opened it up a lot kind of refined the structure on the tree
and here is what I took off just one tree today
massive amounts of branches and foliage unbelievable and these root really easy
from cuttings you just strip off the lower leaves stick it in bonsai soil put it in full sun and
90% of the time they will root I finished pruning the forest so here is what I took off today
massive amount of branches yeah that's a lot and here's a look at the forest now so here it is from
above you can see each tree has its own space and spot of sunlight and if we come down low
you can see each tree is shaped up cleaned up I took that big stump that wasn't growing
off of this tree cleaned it up and the rest were just kind of pruned for
shape direction making sure each branch has sunlight so that's the easy part pruning up the
trees so next will come the landscaping and repotting and some big decisions Manuela and
Reno commissioned a pot a ceramic pot for this forest and I got it this spring it was made by
Sophie and it's a really awesome pot I could put it in that pot and kind of keep the landscape
about the same and the size of the planting similar it's a little bigger the pot I could
space the trees out a little more which would be the practical thing to do because whenever you
have rocks in a landscape like this it gets really heavy this planting is one of my heavier
trees just because of all these stones if I didn't have the stones in the planting it would be very
light I was thinking I have all those rocks that we collected near Kingston and I have two choices
I can make a similar planting with better rocks or I could even go further using even a larger pot
more landscape so I have to decide what I'm going to do I have that great big rectangular pot
that I got from Chris Hendry that would really I could do a lot of landscaping I could have my
salt flats around the island have the start of the island and maybe some elevation changes for
the trees it could be quite an exciting planting I don't think I'd be able to lift it by myself
but I don't think that should be a limiting factor in your design of the forest I can always get
someone to help me so I have to decide which direction I'm going to go if I'm going to go
all out creating this big rocky landscape or if I'm just going to keep it smaller like this
putting the focus more on the trees and the rocks that I do have it's a difficult decision to go
kind of all out on the landscape or cut back and have a portion of the landscape
I know these trees will grow bigger slowly over the years and yeah I don't know I'll get out
Sophie's pot and put it in front and just have a look and see what the possibilities are and then
maybe I'll get out Chris Hendry's pot and try some stones around in it and see which direction I want
to go all out on the landscape or focusing in on a portion of the landscape in my stone collection
here I have these beautiful stones that we collected and I've got quite a few of them
they're flat on the bottom and beautifully textured and colored
and I've got a lot of them I could make quite a landscape but it would be really really heavy
here is a look at Sophie's pot I've just placed it in front of the forest
to give me an idea of how it would look so it's a little bit longer the pot
by you know quite a bit there's a look from above and it's definitely you know a really
nice color for the planting I don't know if you can see it very well here but it goes
really nicely with the planting the greens and the browns yeah it would certainly look good
I couldn't change the landscape a whole lot I could kind of you know make it look better
but it wouldn't be a dramatic change it would be very similar but it sure looks nice in that pot
hmm the other pot I have is the giant one from Chris Hendry I'll show you that one
so down below on the bench here is the other pot
great big one it's the same size pot I put the large forest in I'll show you that
so over here is the large forest so if I wanted to make a bigger landscape it would be definitely
the pot for it it would give me lots of room for stones and the salt flats
yeah it could look quite good I think in either pot if I didn't use Sophie's pot for my
Portilacari Afroforest I would use it on my Schefflera here is a look at my Schefflera
so it's growing in a Fuku plastic training pot so maybe I'll get the Schefflera in the greenhouse
put Sophie's pot in front and just see how that looks here's a look at the pot with the Schefflera
so I really like it with the Schefflera I know you can't see it very well here but
yeah I think it's more suited to the Schefflera these colors in the pot really echo the trunks
of the Schefflera because they're kind of bit greenish in the moss yeah I think this is a
better match for the Schefflera it's about the exact same length as the Fuku Bonsai pot too
so it's uh yeah it would be a pretty easy transition for the tree to go from
this pot to this one and I yeah I think I think this is a good pot for the Schefflera it's just
the right color scheme it's the right size I think it's and being oval I think it matches the tree
really nicely I don't really like the square pot with it the rectangular pot so
yes I think I'm going to make the decision I'm going to use this pot for the Schefflera
I've been looking for a pot for the Schefflera and wasn't having much luck finding one and I
think I have the perfect pot right here so that's the pot I'll use and I'll use the other great big
pot for the Port Ilicaria Afroforest here's a look at the large pot with the Port Ilicaria
Afroforest so it's not too too much bigger uh you know I've got space on each side lengthwise
and widthwise it's just a little bit wider not a whole lot you know so yeah but it allows me to
create more of a dry lake bed here and have more stones kind of making yeah maybe the landscape
more of a focal point I don't know maybe it'll take away from the trees but
the trees will mature slowly and get better each year so I think they'll come in balance
with the landscape eventually yeah and you know depth wise I don't think it's any deeper than the
pot it's in it's a fairly shallow pot so I have got some landscaping to do
