Tiara Mariel- Trançada Com Pérolas

Tathy Lima
2 followers
Tiara Mariel Trançada com Pérolas
Tiara Mariel Tathy Lima
#diy #lacos #tiaras #artesanato
wonderful, how are you? I hope
so, guys, I'm bringing you step by
step instructions on this tiara as it's very
economical. It allows us to sell it very
cheaply because you'll spend less than 2
m of ribbon number two, I'm working
with grosgrain, you can use another ribbon to
jeans for example for you to be
making and the Pearls number and size
CCO number five watch the video until the
end that all the information is measured
everything correctly mother of the tiara that we
will be using is here in the video
ok may God continue to bless
your life, your home, your family and all
the work of your hands comes with me
so my loves, I've already left you
my tiara covered I'm going to give the
size of my
tiara everything correctly Because depending
on the tiara the ribbon measurement won't
So let's go and make the
Tiara, mine is exactly 37 cm,
my tiara is 37 cm, I'm going to use 90 cm,
the 1 mm ribbon, you see, I'm 90
cm, if your tiara is a little smaller,
keep that size, okay, if yours is
36 if your tiara is a little bigger
put 1 m ok because she's going to have a
niece a niece
there and that's it let me take this
ribbon here so it's already covered and you
can cover it your way I have a pearl
with a hole same number C It could be half a
Pearl and
my T 6000 which is at the point of death as
the animal is having trouble getting out, it has to be
squeezed for us when this blessing
is coming to an end, mine is like this, just the
blood of the
beetroot and Here were the I've already
done it, it looks very pretty, the
Zinho finish here on the side, everything is
ok, so let's go, if you want to
make it shorter, put two
bows here on the side Then you make it smaller, right,
in this case, it's an idea that I also saw
one photo with side bows if
not Let's go to our easy step by step
practical people to sell this
headband it is also cheap it is cheap
because you will
spend less than 2 m of ribbon number of I didn't
do it with the jeans I'm going to do it see
Brazil I'm going to do it with
jeans it looks beautiful also with those feet
dot you will find the
middle the middle of it both you can mark it
there, that's
it I'll do it with Rosa I choose the
beautiful colors that go together ok
people, choose two beautiful colors that go
together make combinations with pink
baby so different colors will work
with
baby pink so here it is folded I'm going to
take the Pink one like this you can
see it's folded I'm going to come with
one of the
ends I'm going to put it here inside
get here at the
marking Then you do
this marking with marking here It's the
middle marking, you can see
that Marcinha that we
made, my nails are so
black, let me
tell you, let me tell you what
happened, there's no such thing as cleaning
aluminum, my pans are from
Tramontina, some red ones, like those
things, I use them always
wash it with detergent and then I have some
baking trays that are made of aluminum boy I
bought that aluminum slime I got the
Bombril without the glove and now let's scrub it
yesterday it was 10. a thousand times worse that's why it's like
this black thing like the
nail It's already ugly without doing it so you don't
get scared, there you go, let's
do it guys, I'm just going to lift it up
a
little, put a little dot of
glue here, oh no, not even just put the pistol back on,
just to make sure it doesn't come off, that's
the part, come here pistol and the one in the back
you also
raise it
ready just to provide safety here let
me put this pistol down there for
us so let's go so this rose
is down here Lilac is on top
right so you're going to start with the one
on the bottom Lilac is on top, you're just
going to do
this, folks, these squares need
to be very, very cute, this one does
n't have the ribbon properly adjusted, so you
're going to come with the other one over here,
okay, there you go, the first
movements we're doing, we're
holding it Okay, then
we'll let it go and come here,
we'll have to leave it adjusted as much as possible
and make sure the squares are nice
so they don't look bad.
part because we need it to
be very tight
I'm going to come down
here and see it here,
I'm going to hold it here and I'm going to let it go at the back,
it won't fall apart, okay, it wo
n't fall apart So you're already
holding this little fold
here, I'll play PR and we'll you're going to do it all over
again
holding this little fold that we're
holding it in and then we let it go
again because if you do it
like this you're going to be able to make it really neat, you can
see the
squares and then I'll let it go, always hold on to
that last little fold and
let go of the from behind you will continue
doing this, okay,
I'll do it until the last one arrives. In the
last one, I saw PR show you how
we
finish and make the markings for the
tiara, which for us, I'm going to hold it here, you
see, I'm going to release it, how it
goes. getting pretty
done Okay,
okay, I'm going to pause the video and we'll come
back, I've reached the very end,
girls,
let's
do the last folds,
this one, this one in lilac, she's already at the
end of it, she won't be able to
fold it anymore, I'm going to paste it here, wait a minute. let
me take my
gun let me glue it
in here and
then we'll reinforce it just so it does
n't come apart
here,
ready now I'm going to bring Rosa
up here, let me glue another part
too
ok Ready now guys, we're going to cut
this excess, I'm going to cut it the
excess on both sides, you can see We
're going to seal it
well, the finish here will be very nice,
so if it's a little open, you can
put hot glue, you can see the tips are
a bit
open, and then we put more glue here,
Hey, you can't P, excess, okay, girls,
it's paste All these little parts are well glued together,
so guys Look how cute
our braid is and then we're going to mark 4
C5 guys 4
C5 then you mark Where are we going to
start children there shouting 4 E5 each
side Before I start gluing before
you gluing you put it she is on top of the
action and has been doing this here to see if
it will actually give the right size
if it is a little bigger and you
distribute it very correctly so here it is
very easy now the step by step I am going to
put a little glue here I already I
've been holding it here, I've already taken it out
here, ready, let it dry,
from here on, we don't need
too much glue either.
then it will be well
glued, you will do this
until the
end, you will do it little by little,
press it PR glue,
glue it ready, people,
glue it here, you can
press it here, quickly,
quick thing, even with the bottom of a pencil of
something with finger, we're going to
stick our
pearls together very neatly, how cute is that?
I'm going to come with my T
6000 in each space like this, see
a little glue, you'll go with your Peg,
which I have, but I'll
go very quickly here on the
finger and that's it guys, if your Pearl
has a
hole, position it in a way that
the hole doesn't show, okay, and I'll
finish here and come back guys, I glued
the pearls here on both sides, okay,
you put the glue on and stick it the
most recommended one is the one I
used, okay Here is their result I
really hope you like it, kisses on
your hearts, stay with God and see you in the
next video
