Grilles molded with burning iron in the forge of a traditional forging expert

Traditional Metal Crafting
21 followers
At the end of the century, Juan José Rodríguez sometimes lights the forge to make,
with the same working technique as before, some of the many pieces of forge that were made.
While Ricardo moves the forges to stimulate with the air the combustion of the charcoal,
Juan José tries to give the maximum of calories to the iron, but of course, it is necessary
that the heat is distributed equally in the piece of metal to be forged.
The alternative movement of the two forges allows to maintain a uniform intensity
of the flame and at a higher speed in the forges, greater air intake and more combustion
in the forge.
The work of the blacksmith was of great importance, especially for the construction and repair
of tools and agricultural equipment.
Juan José is going to show us some of the most usual works of the traditional forge.
To sharpen the metal bars, our friend the blacksmith hits the iron on its four
sides until it gives it the pointed shape.
For this work, the metal must always be red hot, and when it cools, it is
put in the fire so that it takes the necessary calories to work it.
After stretching the iron with the thickest hammer, Juan José reviews the shape of the
tip with another less heavy.
When the fence is already sharp, it must give the temper to the iron so that it takes the hardness
of the steel.
Well, this is also to cool the fire, a quick cooling so that the steel hardens and hardens.
And since what interests us is that the tip is the one with the greatest temper, we let it cool
a little bit of water.
Well, this was the technique used to sharpen the metal bars, which was to remove the tip
as thin as possible and get a temper as hard as possible so that it could withstand the
greatest number of hours of work.
In addition to the maintenance work of the agricultural carpenters, another work of the blacksmiths
was the forging of the bars of the bars.
With a piece of square iron, Juan José is going to do a forging work called
salomónico.
When the blacksmith has already given the square the desired number of turns, with the wire
iron, he reviews the shell that the forge leaves.
To be able to clean the shell well, the salomónico must be prepared to mount the bar in a
grid or in another forging work, playing with the other, for example, which has two salomónicos.
Sometimes the blacksmith cannot count on the presence of an assistant who gives movement
to the joints.
To solve this unforeseen situation, he has a device that makes his work easier, which
forces him to heat the iron with one hand.
When the iron is red-hot, the blacksmith takes it to the anvil to give it the desired shape.
This time he is going to forge two symmetrical decorative pieces with spirals with round iron
For this he uses small devices prepared for each model or the fixing screw itself.
But to work the iron well, the most important thing is that it must always be red-hot.
To do this, you don't need to be red-hot, just a little bit of cherry red, a hammer.
Blow by blow and boil after boil, Juan José is giving the spiral shape to the iron until
he gets the desired model.
This has a multitude of combinations to mount in an ornament of a well-finished work
of forge.
Juan José Rodríguez, continuing with the family tradition, has taught the secrets
of forging to his children.
The eldest, also called Juan José, handles it loosely, taking advantage of the malleability
of the hot iron.
Juan José is forging a decorative piece in a spiral with an iron square.
Based on blows with the hammer on the hot iron, he manages to give it the desired curvature.
At the end of the forging work, as always, the piece is put in the water to give it hardness
with the temper.
To finish off and give more visibility to his work, Juan José makes a salomonic
in the center of the bar.
Now, the two blacksmiths, father and son, are going to stretch a grate, which is the main piece
of the ancient plows.
Once the grate is heated in the forge, the two blacksmiths rhythmically hit it
on the anvil to stretch the iron and give it more duration.
When the iron is stretched enough, the grate goes to the temple in cold water.
We don't put it in hot water because what is hard is the tip, which is the one that works
with the earth.
After tempering, when these grates wear out, this stocking is made,
what you see here, which is a glue, to be able to increase the size and continue to have
material to use.
This is what is normally called, in forging, casting the grate.
From iron plates, the blacksmiths also forged the hinges and reinforcements
of the windows.
The chisel, placed in one of the holes in the anvil, serves to cut and shape
the iron at the will of the craftsman.
It is said that, since man discovered iron, within each community he came to consider
and respect the blacksmith as a being linked to those forces of the beyond,
because it was he who knew how to master and shape that metal,
which served to forge both the tools of work and the weapons.
This is used for the reinforcement of windows and things like that, you know?
Well, as you can see, this is the tool that is used to make the spade spoons,
and so that it is not said that in the blacksmith's house there are wooden spoons.
What is clear is that the blacksmith was a vital trade in our towns,
because with the mastery of the technique of forging,
with iron they could make many and useful variations.
Today, Juan José Rodríguez, a man attached to his land, has transmitted to his children
and some young people from Alcántara those secrets, techniques and tricks of traditional forging.
The result of that work, both collective and personal, are various pieces of iron
that, despite being made with the most traditional forging technique,
enjoy the visuality and beauty of modern designs.
I am Eugenio Monesma, director and producer of the documentary you have just seen.
If you liked it, I encourage you to subscribe by activating the notifications from the bell
and so you can enjoy the hundreds of documentaries that I already have on the channel
and of which I will be uploading weekly.
