Forging a Bronze Gladiator Helmet (Part 2): Lion Head Repousse

Forging the Past
1 follower
1 Video View·Aug 1, 2024
I create a decorative lion's head on my gladiator helmet. The process is called repousse, wherein I work from inside and outside to "push" the metal into its final form.
Hi there, Thack from Thack Ironworks. Welcome to the second video, actually I think it
technically might be the third video, in this series of the gladiator helmet.
Today I am doing a little decorative feature on the front bulge of the helmet here and I've
decided to do a lion. The lions ate him! So I happened to find this, I had a rental this week,
the Armor of God, which continues to get rented out because there's a lot of Christians in the
and this is a horse brass with a little stylized lion head on which to me looks very Romanesque
and I think this is quite suitable. I don't want to, I'm not reinventing the wheel here or trying
to make my Mona Lisa or anything like that, I just want to do something fairly crude, something
simple. So that is what I'm going to do, this is actually pretty much the exact size of what we
need here. So this will be a nice reference, something easy and I don't expect this to take
very long, we'll see how much time I spend on it. I have made a specialized stake
and it's got a curvature of plate on there, just something that I can hold pitch. So I filled the
bulge with pitch and then I put my stake on there, clamped it into place. So now I have got my
holder and I am very excited that I've got this very specific tool to be able to hold this and
where can I say? While we're at it, why don't you subscribe to my channel if you're enjoying this
and enjoying this series and we have many other videos, we have tons of videos. How many videos
Eric? 150 something like that? More than 150 videos, so lots to watch. Anyway, let's begin the
but if you get the idea, it's ghosting out there okay. I just got to anneal this thing again, I got
to get the pitch from the inside. You can see the stake that I made for this which I think is a
pretty cool little device, allows me to use a very little amount of pitch to be able to mount it and
work correctly. So I'm just going to go over to the forge, anneal this and then we will start pass
I need to bump out a couple things. For example, here I've got a little bit of a cave in the lower
lip. My lower lip, I need to pop that a little bit and move this forward. Other than that, things are
doing pretty well. I need to bump out some areas to get the ears which are vaguely defined there
and then do a little bit more work on the mane but mainly it is coming along okay. So I think
one more pass just to refine, get the anomalies, to get the symmetry and just sharpen up some
details and that should be about it. And there we have it, a lion head. So I just did a quick patina
on that, buffed out the highlights and I think it looks quite fetching if I do say so myself.
That is it for the mane structure of the helmet then. From here now, let's go back to my original.
So you can see this one is quite a bit bulky, bulkier, it's clunky and look at that casting
that I had done on which I was quite proud of getting that done back in the day. I think my
little lion head looks much more elegant. I'm pleased with that and moving forward.
Moving forward now, I need to do the brim and the back brim as well and then eventually getting
down into the base. I think probably I'll be working on these pieces as well as the crest
for our next video. So when you join me, we'll be doing that. So up until this point, we're two
videos into this build now. We started out, as you remember, with a disc which was a quarter inch
thick or about that thick and about that big in diameter and that we were able to hot dish into
this, do some shaping on it and now with a little embossing we've got ourselves a stylized lion
head. So I'm having a lot of fun with this project. This is really cool and I'm quite excited about
moving on to the next step. Won't you join us, please, for the next video if you have not
subscribed to my channel. This would be a good time to do that and get the bell for the notification.
You know, all that stuff. But anyway, interested to hear your comments on this one and I assume
there's going to be a lot of excitement going forward. There's a lot of people into the gladiator
armor I'm finding. So I will see you next time. Thanks for joining us. I'm Thak. See ya!
