Forging a Bronze Gladiator Helmet (Part 3): Forging the Crest

Forging the Past
1 follower
1 Video View·Aug 1, 2024
I construct the crest for the bronze gladiator helm. Various pieces of bronze sheet are shaped, polished and then riveted together to create the finished shape.
Welcome back from Thakarnworks. Welcome to video three in this series on how to make a gladiator
helmet for fun and profit but no profit. Okay so in the first video we took a disc of bronze which
then I hot dished to create the bowl of the helmet. I made it into this shape in a second
video. I made this cute little lion head here to give it a little panache. So now what we're going
to do is continue on and add the extra pieces to this helmet. So I've got some templates made. Let's
refer back to our original here. Remember I made this back when I was just a child many years ago
and it's ginormous. But I'm using it as my guide for the relative size or shape not size. The size
I've decided to deviate from it. I decided that this crest here was looking a little bit boxy a
little bit square. It's kind of cool for what it is but I thought I looked at some other types of
this helmet and there was some more dramatic looking crests. So I came up with this which I think is
quite daring and dashing. So we've got that and then I've also made up the other pieces here.
You can see which will form the helmet as such.
So after I develop the templates I transfer them to the silicon bronze sheet. It's about an 18 gauge
and cut them out. The crest is a little bit of a complex shape in that it's got to be assembled
together. So what I'm doing is making tabs that are going to interlock fold over and then we'll
be able to do our strip there. So let's talk a little bit about the crest and how it's going
to be mounted. I decided I've got this little crest ridge starter here. I needed a positive
anchoring system to be able to to mount the crest to. This has got a lot of leverage on it so it
needed to be something quite secure. So I ended up biting the bullet and just going for a heavy
chunk of steel 5 8 square and I just curved a piece of steel that fits onto the profile there.
Then I drilled and tapped some holes. This is a 5 16 thread on there and then the whole thing can
get bolted onto the crest. So I've got my bar of steel here. This will provide an anchoring point
to which I will rivet the crest pieces to. So both pieces and then rivet straight through.
So once I establish what my holes are on this I think what I'm going to do is grind away a lot of
the excess here. I've got quite a bit of weight that I just threw on this helmet that's already
going to be fairly heavy. But I just couldn't think of another positive anchoring system that
would work as well as this. So this helmet might end up a little heavy but I'm hoping that I can
actually carve away a lot of extraneous material here once I figure out what I don't need and then
at this point let's get into notching out the crest.
All right so here's my strategy. I'm going to notch this out so you're going to have two sides
and they're going to come together. So I've got my X's and O's here. So O's on one side X's on the
other and it'll come together like a zipper that I will have these notches folding in and then there
will be a piece of two inch wide that's going to rivet the whole thing together. So what I have to
do now with my tiny little brain is to make sure that I cut them out opposite. Realizing I have a
right and a left but that doesn't really even seem to matter. So now what I've done is I've got
this laid out so these are O's. The O's are existing on the other one so they need to disappear
on this one. Right? I hope I'm right. Let's see what happens. All right so I've done my
notching here and lo and behold I actually did it right. This is like a first.
This could actually work out. So these are going to require some trimming as I actually get to that
stage. I'm going to start folding this over and assembling this. It's almost like origami. Kind of
an interesting two-dimensional structure turning into a three-dimensional structure. Speaking of
which I thought the original helmet had just a plain surface here and I thought I would be
disciplined and just keep it austere, simple. But I'm looking at it and I can't do it man. I need to
add a little bit of a flair to this. So started playing with some radiating lines and I think
this will add a little bit of dynamic energy to the thing. So what I'm going to do is put these
lines in then create these little ridges here coming down. So I'm just trying to lay that out.
I just marked out where my tap holes are here. I need to also figure out where my rivet holes are
and I want to do the whole thing in a nice organized systematic way. So bear with me. I'm
going to do a little bit of doodling to try to figure out my layout and then we can start doing
a little bit of fluting in this. All right so there I have done two passes. I might have to do
another one just to sharpen things up but you can see by way of comparison that is much more visually
interesting. I'm quite happy that I did that. Didn't take very long. I've got a nice little
spiral happening there. So I'll continue on with this and you guys will catch up with me in a few
hours and see where I'm at. What I've got now is my two crest pieces here.
And watch this. Prepare to be amazed.
The zipper. So after much canoodling and refiguring and re-notching I was able to get
the pieces sitting together here. Pretty much how I would like it to be. You can see I've decided
rather than having just a straight rectangular shape I want the thing flaring. So it starts
up quite narrow at the back, flares out quite wide up here at the curlicue and then tapers
back in again. Very dynamic and very flamboyant much like myself. You know I'm a very flamboyant.
So let's put this together and see what it actually bolts together and looks like. All right
so something like that.
That's pretty cool. I like it. So what I need to do now is to make a strip that will cover this
and join these together. I'll be putting rivet holes in each of these. It's pretty much an equal
spacing I just checked. An inch and a half. Sorry if I started out this series I was going to go
metric and I just can't do it. I'm just too much stuck in the imperial system. Sorry about that.
And anyway inch and a half spacing is what I'm going to be doing on this. But I need to now make
a strip of bronze with a rolled edge coming down. Let me show you I got a little sample here.
So I did just a little sample just to show and to test what my amount I needed to create
this wire rolled edge. So what it's going to be is a strip that comes down the roll coming out here
and that will cover up any anomalies there and create a nice decorative bead. Much like I did
down here where I did a roll here where that crest can tuck into. So we've got a little bit
of cohesiveness as far as design there. And then this will be come across same thing on the other
side and riveted through making this all into one solid piece. Sounds easy enough but with all
the angles and the depth and everything this could be a bit of a tricky snaggy little process. But
let's begin. So I measured I've got about an inch and an eighth here coming up to about two and
three-eighths to our two and a half at my fattest point here and then get actual tapers back into
the scroll. So started doing a little bit of templating just to kind of replicate that.
See how that looks this will straighten everything out. So came up with this from that I was able to
play with my length I need to get what rolls around there. Anyway this this one then translate
it to this one and there we go. Then I also realized that I probably need to add about an
eighth inch on either end there because the thickness of the material and it just it always
needs a little bit more than you think. So that is my sheet there. I did a test piece here trying
to figure out what I need to add to the side for the rolls. So came up with three-quarter of an inch
extra to create that roll and in doing so I then templated this out and this should be
the strip that we need. Roll a wire bead on either side of that and then very easily just wrap it
around here. I think I'll do a little bit of doming in the center of there create a nice pleasant shape
that I'm kind of going for which I think is quite pleasing. Now this will then
straighten from there. Yeah something like that with the gold edge dropping down here to
hide all the multitude of sins there and I think it will look quite fetching. So
why don't we shut off the camera now and I need a little bit,
in fact need some alone time with this. This is going to be a couple hours of
gentle wrestling to make this all fit into place. Then join me again in a few moments. See ya.
All right so I'm about 15 hours into this thing now and I've got it rough together and it's
starting to take shape and I'm enjoying it. It's a unusual shape, challenging, a little bit awkward
to build. The problem I ran into is I realized I got, I ended up making this thing a little wider
than I first expected to and the thing is getting heavy. So what I did was take my steel bar here
that goes in and I ground out and drilled out as much material as I could. So I was at before that
about five pounds with this crest which is obscenely heavy. So I'm trying to bring it down
ideally two pounds would be better so about a kilogram somewhere around there. I'm not sure
that I'm going to be able to take it down that much but I think what I'm going to be able to do
is when I do the polishing on this is grind this extra,
remove extra material. Also my little zipper pattern here I think I can remove
quite a bit of that material because basically we're doubling up on that layer in there. So I
think I'll do that try to bring the weight on this thing down. If I can bring it down under three
pounds I think I'd be a little happier as far as the weight of the helmet. This helmet is going to
be heavy to begin with and I just think it's going to be a little bit unwieldy if this thing
is too big. Realizing that the gladiator helmets and this style of helmets particularly was a heavy
and cumbersome type of helmet I'm not really sure what the thought process behind that was.
Anyway we can address that further. So I'm going to do some polishing now and then assembly is
going to be a bit of a bitch because it's hard to get in there. I'm gonna have to get some rivets
in there and close this whole thing up. So let's see how that goes.
This is a complicated little structure. I've spent some hours polishing and I've started the assembly.
I did the easy part in where I have a easy access to be able to rivet the one piece to the other.
Now what I have to do is add this piece where all of a sudden access is going to become a problem.
So to surmount that I have built this little tool here where I can reach in there get my rivet in.
Essentially I've drilled a three-eighths hole in there and my rivet can actually sit in
voila and I'll be able to get it on there and do that. First of all though
this um my curl here is uh it really had tight access to try to get in so what I've got here
I don't know if you can get a close-up on this I've taken an eighth inch rivet
like that and I don't know if you can see that if you've got enough uh close up there I've taken
onto the bandsaw and I put a slit in this thing so this is a split rivet now
because I have no access to get in there after I put this in what I'm going to do is slide this
in and then try to get in with a screwdriver and just pry this open to get some sort of gripping
there uh the idea I don't want this part to collapse in there I was able to put a rivet
in this side to hold this in don't know if that's all making sense it does to me so anyway let's
leave the patina on for a little bit it just kind of mellows into this beautiful shade here when I
first do it it has this look which I don't really like as much but this given a week or two this
will all look the same anyway I'm off topic there um this was a challenging little project a lot of
pieces and assembly and I was trying to do it in a historically plausible way I'm not doing it
historically accurate by any stretch and before you historical Nazis jump all over me about this
not being historically 100 correct I understand that but I am exploring historically plausible
techniques in order to create this and I think I'm I'm accomplishing that I'm having a lot of
fun with it there's a very interesting piece so quite happy with what I've got for the crest
this started out quite heavy and I was able to bring the weight down to about three pounds
from four and a half so lighten it up a bit the whole thing is still a little bit heavier than I
would like I may remove some extra material out of here yet but anyhow by the way backdrop here
I just saw it I showed the door here Eric do you want to pan out on this and there's something in
a different backdrop just kind of show you what happens on my day job I'm not always making cool
armor sculpture for YouTube sometimes we're making stuff for the clients now so this is a pretty cool
door that we're just finishing off I've got to go up north and install it in a cottage next week so
pretty excited about that but anyway let's get back to this so we've done now three videos in
this series where we've hot dished the bowl we've then done a rapoose to create this little lion head
on here and now we've got the crest what comes next is the brim those pieces and then the face
guard yeah so a little ways to go please stick around please leave comments I'd love to hear
what your feedback is on this how much you like if you think I went a little bit over the top with
my crest here I want to hear what you got to say so see you next time stick around see ya
