快速解題~電腦軟體應用乙級術科題組二附件五word文件製作Office2016

芳華老師的電腦小教室
569 followers
135 Video Views·Jul 18, 2024
快速解題~電腦軟體應用乙級術科題組二附件五word文件製作Office2016
We're going to talk about how to use the computer, and how to use the Word document.
As you can see, we have to have this title here, and we have to have it every page.
The title says that the size is 20 points, and we have to repeat the title every page.
And then there's the date.
Although it doesn't say how high it is here,
we have to have it every page, so we're going to put the title and the date at the end of the page.
So let's click twice on the ruler to set the boundary.
It's about three centimeters up and down.
And then we're going to click this box and go to the bottom.
Click the page box, and then we're going to select 1P1T, and then up and down.
And then we're going to select the text here, and then we're going to set the distance from the text to zero.
And then we're going to click twice on the ruler to set the boundary.
Let's take a look at the reference answer here.
If you look at the page above, you just need to enter this T2-5.
So we don't have to go into this triangle anymore.
We can just do it like this.
And then we're going to select this one and we're going to click on the long line and we're going to go to the bottom of the resource.
And then we're going to go to the end of the page.
At the end of the page, it's got to have this word on the left, middle, and right.
So we're going to click on the blank triangle at the end of the page.
On the left here, we're going to enter the exam number.
The middle one is the page number, so we're going to press the page number in the middle.
The current location is a pure number.
On the right, enter the name of the examinee.
After we've entered it, we're going to the left.
When the arrow appears on the left side of the mouse, click on it.
Go to Control-D and set the font.
The Chinese font is Xinxi Mingti.
The English font is Times New Roman.
The size is 10.
After we've set it up, we're going to go back to the top here.
And then we're going to press the F4 shortcut to repeat the previous action.
And then we're going to do the title part.
For the title, we're going to insert the text block.
For the text block, we're going to use a simple text block.
we need to set the width to 15.
We set the position to the middle
After we've done that,
let's set the width to 0.
And then let's type the title using a text pocket.
To enter North America,
we need to click on the Enter key.
We just need to press the Enter key.
We don't need the new part.
So after we enter the date here,
We select these words and press Ctrl D.
The Chinese font is the same as the new font.
The English font is Times New Roman.
Okay, size 12 first.
When the size is set,
Then we select the title word.
The title word, the screen specifies that it should be 20.
And it has to be symmetrical.
And the date part, it has to be symmetrical.
Then we can take a look at the reference list here.
Here, the title word has to be asymmetrical.
So we select the title word as well.
Here we have to continue to set it to be asymmetrical.
Then there are double lines and double horizontal lines below it.
So our cursor is here.
This is the place of the Republic.
This cursor is here.
Click here.
We go to the bottom of the box.
Then we choose the double line.
After choosing the double line,
We are here to use the paragraph.
Then we go to press 5.
Just click on the box line.
Okay, sure.
So there are double lines below here.
Okay, let's go to the blank space below to press twice.
After pressing twice, we can go back to the text.
Then you can see that
This title word is already here at the beginning and end of the page.
Okay, let's insert the text file.
Then we choose Dataset 3.
If we are here, select the YR file.
Okay, after logging in,
Let's do the action of replacing this.
First of all, you can see that
There is a blank space between the paragraph and the paragraph.
So each paragraph has two paragraph marks.
Then we press the quick button to replace it at the beginning.
Here, we use the paragraph mark to enter two paragraph marks.
Next, we replace it with a special symbol.
Let's use the symbol to show.
Then press all to replace.
Next, we remove the extra paragraph between each paragraph.
So we leave a paragraph mark here.
Don't hit the replace button below.
Press all to replace.
Okay, let's put the title word we just entered.
Here, look for the goal, look for the title word.
Next, replace it with a paragraph mark.
Okay, replace all.
In this way, our paragraph is processed.
Next, we press all to set the font.
CTRL D
The Chinese font is New Text or New Text.
The English font is Times New Woman.
The size is 12 points.
Then we are here at the location point.
Let's set its alignment.
The title requires the left and right to be aligned.
The first line must be located two words away.
Then we go to the Chinese print sample here.
Don't hit this first and third.
After confirming, the title is here.
As I said before, it has to be divided into two columns.
The column spacing is one centimeter.
Then we don't want to choose the blank paragraph below.
We just need to choose the last word here.
So here we remove the extra paragraph below.
Then press all to select.
We go to the panel configuration, column, other columns.
We divide it into two columns as the title requires.
The column spacing is one centimeter here.
After confirming,
the title requires the layout to be entered.
The layout is here.
As I said before,
the layout has one on the top right, one in the middle, and one on the bottom left.
The one in the middle must be centered and brush.
And you can see that the second page still has it.
So the layout in the middle
must be placed in the beginning and end of the page.
So that you can see it across the page.
Then let's do the layout in the upper right corner.
For the layout in the upper right corner,
we need to click on it first.
Let's insert the picture.
For the picture here, we just need to select an archive.
After selecting an archive, the title is here.
The height here must be 8 lines.
The text on the left must be 6 Chinese characters.
And the shadow here.
So let's enlarge it here.
After enlarging it,
let's set its position first.
It has to be on the right here.
If it's on the right, it will go to the top right.
So let's pull it down.
Pull it down here and align it with the top right.
It will appear this green line.
Then let's set its size.
The left one needs 6 Chinese characters.
We have 5 here, so let's pull it a little bit to the side.
Okay, that's 6.
The height here must be 8 lines.
Let's pull it down a little bit here.
Okay, after pulling it to this height,
let's set its shadow.
The shadow is here.
The shadow here.
It has to be the shadow on the top right.
So let's select the shadow on the top right.
The shadow on the top right is not too big.
For reference, the shadow on the top right is bigger.
So let's adjust the shape here.
So let's go to the picture format.
Shadow here.
Let's make the shadow a little bit bigger.
Okay, let's adjust it to 8.
After adjusting it to 8, you can see here.
Let's take a look at the reference answer here.
For reference, the shadow is closer to this word.
The shadow here is already too much.
So let's adjust it down a little bit.
And then this picture has to have a frame.
So let's click here.
Then let's set its frame.
Okay, after this picture is set, we will copy it.
Then paste another one.
If we paste this one,
we have to put it in the lower left corner.
So let's click here.
This position at the bottom left.
After putting it at the bottom left,
we have to adjust the direction of its shadow.
Its shadow becomes lower left.
So let's click here again.
Shadow.
Then let's choose the shadow at the bottom left.
Okay, after you set the shadow at the bottom left,
it goes back to the smaller shadow block that was originally preset.
So let's set the distance of its shadow again.
Let's make it bigger.
After making it bigger, let's adjust it again.
Here, the shadow at the bottom left is closer to the edge.
So we have to remember to pull it over a little bit here.
Because we have already set its size,
so the height here is the same.
There are eight rows.
For the text part, we have to adjust it again.
Because there are only five words here.
So we have to shrink it a little bit.
So that it can have six Chinese characters on the right.
Okay, after setting it up here,
let's copy it again here.
Let's go to the top here,
click twice at the bottom left.
Let's go to the bottom left here.
Let's paste the picture we just designed.
The picture in the middle, the picture in the floating shadow,
we don't need shadows anymore.
So let's click on this picture.
Let's go to the shadow block in the picture format.
Let's choose no shadow in the shadow block.
After choosing no shadow,
let's go to the position here and choose the middle one.
Then we have to press the color to brush it.
Like this.
Then you can see the picture in the middle here.
Its text is on the top of the picture.
So we have to click on the text in front in the way of circling the picture here.
In this way, we can go down the picture.
You can see the words.
Then it says here that
there are four words on the left and four words on the right.
Then here is the height of the eight rows.
The height of the eight rows.
So we have to adjust its area here.
We have to pull it here.
There are four words on the left and four words on the right.
Then there are eight rows.
You can see that it is located in the fourth line of the second paragraph.
So we have to pull it up here.
Okay, let's pull it here.
Okay.
After adjusting it,
we can click twice in the middle here.
You can go back to the text.
Then you can see this page below here.
There is also this picture in the second page.
You can see the reference here for the text in the second page.
The text here is equally distributed.
So we can count it here.
The text here has nine rows.
Let's put it here.
Click here in this line.
Let's go to the panel configuration.
Divide by column.
Let it go.
You can make the text here equally distributed.
Okay.
After dividing the text here,
let's check it again.
The title above
has just been divided.
So this word has come up.
If it comes up,
let's go to the page above and click twice.
Let's enter the date here.
Let's press the center alignment once again.
Okay, let's go back to the text.
Then let's take a look at the top here.
Let's take a look at the top here.
The height of the picture here
is the height of the eight columns.
But the words on the left
all need six Chinese characters.
So here,
let's adjust it a little bit
to make it six Chinese characters.
Then it's the same here.
There should be six Chinese characters.
Then the height of the eight columns.
Okay,
where the floating sound is,
there are four Chinese characters on the left and right.
Then it's the height of the eight columns.
Okay,
the words are on the top of the picture.
The picture is light,
and then there is a frame.
Okay,
it's done after the check.
The above is the document operation explanation
of T2-5Word.
