I make a crest for my bronze Corinthian style, hoplite helmet.
The crest is constructed from two pieces of silicon bronze which are shaped over a steel form. These pieces are then embossed with decorative relief. For this, I chose the iconic Minian bull from a fresco found in a palace in Crete from about 1700BCE. 1000 years too early for the time period of our helmet, but perhaps classical greeks were inspired by their prehistory as we are today.
In any event, the relief was made using the repousse technique, utilizing pitch as a backer. The two ""mirror opposite"" panels were then welded together and bolted to the top of the helmet. The crest was then partially filled with black silicone caulking and tufts of horsehair were inserted into this to create the finished look.
At long last I'm back to the helmet it's been several months I've had a very bizarre and crazy
year so I'm finally getting back to this piece and very excited about that I am going to do
the crest so I have last night I sat down and did a little bit of templating and I came up with this
as my shape for a crest and I should point out right off the bat I didn't go look at anything
historical as far as looking for shapes for this particular thing I merely went with the aesthetics
of what I already have with this helmet I am approaching this helmet from a little bit from
a historical venue but more so from an artistic point and I'm going for the aesthetic of it so
I was just trying to capture something that I felt had nice lines and flowing and moving towards
the direction of the shape that I would like to see so you hardcore greek geeks historical purists
just back off right off the bat here and just let me do this this is going to be well it'll be more
historically accurate than something from the movie 300 but it's going to have um it's going
to have a little bit of latitude for me to express myself on this one but let's see what it what
happens so what I'm going to do is make a jig to make the crest the crest will be pounded out of a
piece of bronze and bronze sheet and we're going to be doing some repose work some decorative
sculpting within there but first what I'm going to do is do a steel frame onto which I will pound
my two bronze pieces on either side of this to create the shape for the crest all right so the
pieces are roughed out I just need to weld the joints together here do a little bit of grinding
and then our die block is ready to do either half of this so step one I'm back okay so I've taken
my pieces welded them together and created this cool little thing here also cut some grooves in
here for um the roped well not actually a roped edge more like a dental molding on the what I'm
doing for the edge treatment there anyway got my little frame made up in order to work the bronze
and actually because we're doing two mirrored halves I went ahead and worked on the first
half there and got it roughed out so that is what we're going to be achieving today I'll show you
the process on the other piece there so that is what we're going for we're starting with a piece
of bronze like this and I'll be forming that around here and then we'll be moving to the
to do our interior decoration which brings me to my next point so looking for
some sort of interior decoration on this to embellish it and what I decided I was going
to do is put something in that would work with that shape and every time I went and looked at
Greek art I kept coming up with this Minoan bull in Knossos guys leaping over the back of this
bull now before you jump in there you uh you hardcore Greeks I know that the Minoan culture
predates the poplite Athenian Corinthian whatever by about a thousand years and it's actually I'm
not even sure that Minoan is considered a Hellenistic culture part of the Greek culture
they certainly there are creed where they are now but I don't think they were then but I think
that they still could have been an influence for the Greeks and I'm going to take it on that that
they might have been aware of this type of artwork and this would have represented
a historical fable because the Homer myths I think are tied in with Minoan culture as well
if I'm not mistaken correct me if I'm wrong anyway the big factor was that this bull actually fit
nicely into the frame that shape it just kind of lent itself to the shape so that was
a big factor as well and that's what kind of drove me to using that sized it down and got it so that
it's floating in there and that's basically my starting point for a nice dynamic shape in there
the Minoan bull and then around that I just looked up some other motifs that might work and I just I
found the scrolly stuff to be good as a blacksmith I use scrolls quite a bit and I just thought
because of all the curves in here it really lent itself well to rounded shapes so that's what I
went with this is my piece of artwork here not sure if that is really clear but we'll get into
it as we we start raising it out in the pitch there we go enough talk let's move on okay so
I've cut out my piece of bronze I've got quite a bit extra for the edges because you see my other
one here and I keep this one here just to make sure that I'm actually doing the mirror opposite
so easy so many times I've done that where I make two rights instead of right and a left so
I idiot proof it get it dumbed down so that I don't mess up now before I'm going to anneal this
piece I'm just waiting for my forge to heat up while it's doing that I'm just going to get this
positioned onto the frame clamp it down all right so that was phase one I rough hammer just using a
hammer brought it down to fit onto the frame there now I'm going to move to phase two where I'm going
to start putting in the the roping let's just call it that so I'm going to get it I moved up
to a higher table a platform that's a little bit easier for me to stand a little more comfortable
so here we go all right so that completes phase two I basically got my dental molding around the
outside so everything is roughed out in that regard now I want to start doing the inner shapes
get the bowl motif on there as well as our little scrolls so what I need to do is fill the form with
pitch so I'm going to grab some chunks of pitch and come in with some heat get that heated up
clamp it down and off we go okay so that's pass number one I've just pulled it off the
form I'm going to go anneal it you can see there's quite a bit of distortion so what I need to do
is anneal it to soften it up again and then from the inside I'm going to push everything forward
and then I'm going to add some extra pitch here knowing where I need it to come up there and try
to create a better backer that doesn't cave in as much so that's pass number one I'm not sure how
many more passes we're going to have to do to sharpen this up I guess it really depends on
how much time I want to spend how what level of detail I'm going to go to so we will have to see
what that actually is okay that is pass number two I have now established the highs and lows
pretty good here some distortion happening again some work hardening happening again I'm going to
pull it off and heal it one more time level everything out or get it nice and flattened up
back in the form and see if I can refine the detail get into these scrolls here and just
sharpen things up starting to really take shape there I did a little bit of
stuff in the body there I didn't it's kind of hard working with a two-dimensional
what was a fresco so now it was never 3d and trying to put some depth into that
so what I did was just grab I've always got little figurines or statues or whatever
here for doing different sculptures so I had some deer and use them they were the closest
bovine type structure just to give a plausibility to the body shape there so seems to be working
out okay I'm relatively happy with it I'm not sure how much more detail I'm going to bother putting
on this I could end up spending I could spend hours on this another 20-30 hours if I wanted to
but I might have to bring it in and make it a more practical shape but let's give it one more pass and
half done here let's turn this around and you'll do my reveal the truth of it all here if you have
if you're really pressed for time you could just do half of a helmet and leave the other half open
like a movie set and you know that anyway okay so I shaped this side of the crest here and I've got
it rough mounted onto the helmet this is the way I will be fastening here we're going to be welding
brazing them in would be more appropriate onto these nuts here so that I'm able to remove this
thing so now that I've got the one half done I've got my other piece here that I just finished with
repose I've got a fair level of detail I didn't go too intricate on it again it all comes down to
how much time you have to spend on that and I realized that I had put quite a bit of time in
getting this much shape which I think is adequate for the general usage of this or where people will
see it the distance that they will see it most people won't have it right up here where they're
looking at it very closely looking at it from 5 feet and 10 feet this is lots of detail really
kind of shows you give you some sort of visual interest so I think it's adequate for what it is
still fairly crude but also in keeping with the rest of the suit which I want to have a very
tooled handmade look to it so anyway enough of that we're moving on so now what I need to do
is to cut the edging out on this one roll the edges over and shape it to fit to the other half
of this and then we can braise those pieces together so without further ado I will begin that
okay so I've got my piece ground now and evened out everything is most of the distortions have
been knocked out of it it's ready to fit onto the helmet but what we want to do is now antique
it or patina it to get it to match the rest of the helmet with that we're using gun blue and
to be quite fitting we're using it in a greek yogurt container I think that is very important
to those sorts of details matter okay so I'm just going to paint gun blue on you've probably seen
this before if you've been watching my videos okay now I will neutralize the acid by dunking
it in water and whilst it is still wet I will come in with some steel wool and just pull off
some highlights here this is always kind of the payoff for stuff like this
something like that now I was having trouble sourcing horse hair I want to put the horse
hair into the crest there and finally found some last week it has still not arrived so I'm
kind of annoyed right now because I'd really like to get this thing done but we're gonna have to
shut off the camera and come back another day when that horse hair arrives through the magic
of a video I will see you in two seconds bye and the crest is complete now I didn't film putting
the hair into it but let me just explain what I did my thinking beforehand was I had needed some
sort of adhesive now adhesive to be able to stick it in there and I was thinking of using epoxy
which I have used in the past but that's kind of a one-shot deal and you don't have a lot of time
to work with and in thinking about it I thought maybe I would just go back to good old reliable
caulking and I got some silicone caulking and so what it basically what I did is build that
build the whole comb part of that up there and then just rammed in the horse hair and it was
able to just kind of get in position then I was able to move it around and had quite a bit of
set time before it works so this worked quite well then I was able to go back in and put a
get some more horse hair rammed in there and trim it and like I've always been told if you
have a thick black cock you have options the world is your oyster
so after that set up the hair was quite long and it was very bed head it was all over the
place so I started trimming it down with the advice of some females in my life
hairspray seemed to be the option here and since I was going for this very extreme
mohawk we went into the went to a store and just look for some stuff and I got got to be
high insta hold so for extreme hair features this is the kind of stuff I should be getting a paid
endorsement for this what a what a great visual dramatic use of their product here but I'm not
getting an endorsement for it but uh got to be think about me so once I had the hairspray in
place I was able to get everything up and then do some final cutting here I'm looking at it now it's
still a little bit of jaggedness I might do some further refining but essentially I've got
the finished product here and you can see everything came out
quite nice I think it's got a very stately and dramatic look to it
so in conclusion the crest this whole assembly of the crest took me about 30 hours and if I
recall correctly I think the helmet itself took about that same amount of time maybe a little bit
more so by putting this crest on just a merely an aesthetic add-on basically doubled the time
on this helmet so quite a bit of time to put this whole thing together but I think the effect
is quite lovely I'm pleased with it and I should mention incidentally I never looked at any
reference material for the crest portion of this I wanted I am approaching this from a sculptural or
aesthetic aspect so I wanted to just kind of just take my flow or my lines I'm just trying to
create my own sort of look for this thing here so historical accuracy was certainly not
my top priority on this I think I probably came in with something that looks relatively
historically accurate but that was not my first priority and I was just looking for something to
get a real sweep through this whole thing that it's got kind of a sense of drama to it and I
think I achieved that I'm quite happy with it the helmet itself was I did a little bit more research
on as far as getting historical accuracy I chose to do one with a shorter face I think as I
mentioned in the helmet video itself a lot of these helmets have longer cheek plates coming
down extending right down almost onto the breastplate I wanted to shorten mine up make it
a little more mobile and also made the eye slots a little larger than most of what I had seen I
also added the little ear scoops there which was kind of a later period even though most of the
rest of the helmet is of an earlier period so anyway there you have it I think this was a very
fun project it was quite challenging for me and I really would like to do more of this Greek
helmets and really explore this style of armor much more so in future videos look out for that
we need to finish off my hoplite suit I've still have several pieces to make the back plate that's
big one that's haunting me right now we're going to get onto that very soon and then the greaves
and then we got to weaponize that entire outfit as well so still quite a bit to go on that and
then from there I want to do some other bronze armor and videos in the future so please stick
around we also want to do some more historically accurate or historical discussions about the
construction of this and how this sort of armor went together but this will be in the future so
for now I think I'm going to sign out so back out see you next time