羅滕堡城市素描教程,適合初學者的簡單分步教程。

即興創作
2粉絲
11 次觀看·2024年7月11日
URBAN SKETCHING Tutorial Rothenburg Simple Step-by-Step For Beginners.
Hi, I'm Scotty, and in this urban sketching tutorial,
I'm going to show you how to sketch this scene from Rothenburg, Germany,
in a really simple and loose way.
OK, so step number one is to add a frame around this sketch
to help compose the scene a bit easier,
so it's not too close to the edge.
OK, now I've got the frame.
We can see here are my main shapes.
The eyeline is about one third up from the bottom of the page.
If we divide between the bottom and the top of the frame there,
break it into three,
and that bottom one is the third that we want to go to.
So let's just go across lightly.
The first main shape we're going to sketch
is that front face of the building there.
So if we come across to the eyeline, come about halfway,
let's go across just a fraction more,
and let's put a dot on the eyeline just there.
If we come between these two points,
let's put a dot halfway between.
Now that width there,
let's go up here and put a dot here as well.
And then we've got a square.
If we take about half of that and come down,
and we put another two dots just below those two.
So now we have that front face of the building.
So on YouTube we're going to skip through the steps here
to make this as concise as possible.
If you want the full version, that'll be on my Patreon.
So I'm going to go slightly up and just add that line.
So let's add a little subtle line across here.
So the next step is to join these up here.
You can add a little nice character to it like that.
OK,the next step is to roughly go in the middle here,
between these two points.
We want to get that height and go up.
So we go across like this to the top,
and then kinks out a little bit like that.
So if you divide that into three,
that's where we put a dot there,OK?
OK,so we go straight up from that point,
and we come just higher than your tip of the building,OK?
And draw another dot that same height,
and that should be your width.
Keeping it loose again,
come out just slightly more,
so I hit that nicely like that.
So you want to make the arch come up
just below that point there.
And you can go like this,
come down to that point,
and draw that second arch at the back.
I would say halfway between the top of the page and your tab.
Curve them up,
and then link those lines up.
So angle it in like this,
circular shape like that,OK?
And then we go up.
It is out of the page.
But we need to make a way around the page,
so we don't get bogged down in the detail of the entrance.
So then we come down like that.
Just come across a little bit to there,
come across like this.
Next step is to come down here.
From this point here,
if you go to halfway and then a little bit more,
and then come out this way,
dot there.
So let's draw a line like this,
just a tiny bit of angle there.
Another bit like that.
Let's draw that down,
add a little line like that.
Now we can add the buildings on the side.
So that's the pinnacle of the roof.
So let's go up to like this,
and then down.
It has a very curvy roof line here.
It comes all the way down.
There's a roof there.
Just do this from observation.
And then let's come over to the side here
and draw these buildings.
Now draw an angled roof towards the tower.
And can you see we've constructed that scene?
It's a very complex scene,
but when you start with the main shapes
of the most important subjects,
then you can build around it.
So I've just got those rocks there on the side,
those blocks,
large square.
And then it's divided into three.
And then let's just draw lots of lines.
So I've got all the main shapes.
I'm starting to go into the details now.
So let's draw our figures.
Just draw a little abstract shape there for the head.
It's the silhouette of that jacket.
And then the feet,
they come in,
tapering a bit more for that jacket.
That gives a nice story to this sketch.
So let's draw the lantern.
And now we can go into the details
a bit more on the tower here.
It's a great clock.
It's a loose circle.
And then a bigger window down here.
And I'll just add a few windows here.
Maybe a few shapes here,
like some car shapes.
Go up like this.
And there's two windows here.
Big rectangle.
That's a plant in the bottom section of the window.
Some of those.
And then let's draw three windows in there.
And then another window here.
Line that's going there.
Just hinting the windows.
OK,we're almost there,
but I need to draw some of this wood,
these wood panels on.
Let's just give it a border.
And come down like that.
So you've got an hourglass shape.
And then a little one in the middle.
And a line there.
OK,so we're going to leave the,
I think the texture here for the watercolour.
And the main focus of the detail
is around this section here.
OK,the next step is to add watercolour to this.
With the sky,
we're going to use cerulean blue.
Through that like there.
Just between the buildings.
So the road is Payne's Grey.
So let's see how we get here.
Avoiding my figures,of course.
It's quite nice.
So I'm going to add spiders just to blend that out.
Yellow ochre in it.
Dulls the colour a bit.
So I'll turn my page around like this.
Get some yellow.
Cadmium yellow I've got.
Like this.
And this will give a really nice
variegated wash through there.
OK,just let that dry.
And now I've turned it back around.
Yellow ochre.
To dull it,I've got this Payne's Grey.
Just a tiny bit in there.
Colour like that.
Through there.
Nice broad strokes around here.
We're going to do those windows.
Window frames.
I'm using burnt sienna.
You can put that on the roof there.
Use burnt umber as well.
OK,and these roofs here.
So I've got permanent rose
giving a wash to this back building.
Down the side.
It's very light down here,isn't it?
Light blue for the clock face.
I'll leave the middle.
So let's go Payne's Grey.
And then just in some of the windows.
Viridian green.
Like that.
Cadmium red.
Turquoise.
And then viridian green.
Turquoise.
So let's add that on the doors here.
Where else are they?
Up here.
Burnt sienna.
With a bit of Payne's Grey.
Just a touch.
A bit of a wash on those.
Just here.
OK,I'm really happy with the flat colours.
But I just need to add a bit more orange into this area.
So how am I going to do that?
I have an old toothbrush.
So what we're going to do
Is use that to add a bit of effect here.
Into the pink area.
Nice light wash.
And then we're doing some of the bricks.
So we're just suggesting at the bricks.
Here.
That could be a bit lighter than that.
Add a bit more grey.
Put that in there.
So we've done the main shapes of the watercolour.
And then we've added lots of texture on top to give it interest.
So for the shadows layer,I'm using my round 10.
I use a mixture between Permanent Rose and Ultramarine.
Add a nice stretch across there like that.
And leave a shadow on the roof.
There'll be shadow on this side.
Just put a bit below.
And come across like that.
So now I'm going to add some highlights with my Posca pen.
PC-1M.
So I might put a line just across here.
Like that.
Just on edges of where the light would hit on objects.
On the heads.
Put a sparkle on his shoulders.
And the robe.
So there you go.
That's my end result.
I'm really happy with the sketch.
It has depth.
Interesting colour.
But very light and loose still.
I hope you enjoyed following along with those steps.
But if you really want to improve your sketching.
I recommend you join my Patreon.
Because I've got the full version of this tutorial without all the cuts.
And get all those steps in.
There's lots of detail in here.
And then there's a community which you can share your sketches.
I can see them and you can ask me questions.
We've also got a weekly poll where I post my reference.
And then my Patreons vote for which they like the best.
Otherwise thank you so much for watching.
And I'll see you in the next one.
