適合初學者的散墨和水彩素描過程(您必須知道的透視技巧!)

即興創作
2粉絲
16 次觀看·2024年7月5日
Loose INK & WATERCOLOR sketching process for beginners (Perspective tips you have to know!).
Hi, I'm Scotty and thanks for joining me for this sketching tutorial.
I'm going to show you how to sketch this tram right here.
It's a really nice old tram with lots of detail.
But I'll show you how to break it down into simple shapes
and then move on to the detail.
But first, it's important that I explain the perspective.
So I printed off a picture of the tram here.
And first I want to ask you, where do you think the eyeline is here?
Because that's one of the important things that we can work out
when we're looking at perspective.
Well, if this line here is exactly horizontal
at the edge of the picture here,
we have to find something parallel in the object.
So this top roof is at an angle,
so that's not where the eyeline is,
and it's not down here.
And if I go up the different features,
I try and find the eyeline somewhere approximately here.
So what I'll do is I'll put a line here.
It's going to be a little bit shaky,
but there you go, right across there.
So that's our eyeline, approximately there.
Now, we know that the eyeline is great
because if we extend the eyeline out,
which is also called the horizon line,
we know that every single line here coming off the tram
will connect to that horizon line somewhere.
But that can be tricky when we have a small page like this.
How are we going to work it out?
So if I was to find the highest point of the tram,
it would be here, so I'll put a dot here.
And then if I find the lowest point, it's here.
Then I go across here and I find the same point,
but it's much lower.
And across here, same point.
So if we connect those, that'll be that face over here.
So I'll connect that like that.
And across the top and down that edge.
That'll be the corner, OK?
And then if we come to the back here,
a similar point would be here and the height here.
So I'll just put it in a rectangular prism
so you can see how simple
this whole tram can be brought down to.
OK, so it's in a rectangular prism there.
With these two lines, if they extend them out
to the horizon line, they'll touch at a certain point.
And same with this side.
If they were extended out,
they'd come to a point on that line together.
We don't always have a page that's big enough
to fit those lines in.
One little tip that helps with thinking this through
is instead of drawing those out,
you picture that all of the lines coming from this line
are slowly fanning out at a steeper angle.
So the lines closer to this here,
you can see here are quite flat.
And then as they go further away,
I angle them out further and further.
And here, there's quite a big angle.
And here, just a slight angle.
But then up here, quite a bit more angle.
So you can see, as we're putting in different features
in this direction,
we have to make the lines steeper and steeper.
Almost flat, just a slight angle.
And then it gets even steeper.
So now we understand a bit about the perspective of the tram.
Let's move on to sketching.
So actually, I'm going to use my pencil here to help.
So we want to get that eye line in,
which we can draw with a pencil if we like.
Like that.
We want to form this box,
so we just generally know where things are.
So about here, we're putting a dot about here.
So it's a bit off from the centre.
Putting a dot here.
And then putting a dot down here.
And then we go down, angle down a bit.
To about there.
And then straight down.
And then down a bit here.
So we've got a nice angle here, matching the tram.
OK, and then we go down the back.
And a bit lower than this point.
Quite far down the end of the page.
Here, a bit closer to that line.
And this one goes higher than this point.
And equal with this point.
About there.
OK, and so we can rub that out later.
And let me know if you like this step,
adding in a bit of pencil for the construction.
OK, so now we've gone to my Uni-ball Vision Pen
with a micro tip.
So I'll start just a little bit below that dot here.
I'm going to make sure we get that edge,
the round roof there.
That's important to get that.
And then we go up.
And the angle, following that same angle,
those two dots.
Down like that.
And we're just going to silhouette,
do a silhouette right across the top
until we get to the other side.
We want to aim for about here.
Somewhere around that dot there.
So we go across here,
there's a straight line.
We're just silhouetting the shape.
And about halfway,
we get to that point where there's those wires.
And we can just draw this slowly.
Go across down this way.
And there's another box here.
And it goes up and down there.
And then we get that curve,
nice curve again on the back of the tram.
So we have the two curves here.
Make sure that's there.
OK, so that's the top.
Now we'll go down both sides.
So go down in for the window.
Make sure we do that.
And then we go down
about halfway between the window
and the bottom edge.
It goes out.
So it's got here and back
and then out again.
And then we're going this way.
We go diagonally across.
And then we're aiming back across there.
So we've got lots of straight little lines
and then a wheel.
All those sides there.
And there.
So we've got that bottom.
Just a rough, quick sketch there.
And then down this back side.
OK, so then we've got the silhouette.
We've used those dots
and we've got the eyeline
that helped us position everything.
So the next step after the big silhouette
is the main shapes.
So we know that the curve of the roof
starts here and ends there.
So we'll go, we'll try and do that
and add a bit of a curve.
And we just need to go up a little bit further.
And I'll say it's about there.
So just up a little bit
and that gives us an opportunity
to add a bit of a curve on the front there.
OK, and then we make our way down to this point.
So I'm looking down there now.
I'm a little bit off.
I just wiggle to readjust.
And then I'll do this front bit here
which will follow the bottom of the tram there.
So that'll also have a nice curve.
Where would that go?
So from here, slightly down.
Just slightly down to here.
Same point there where it finishes.
And let's curve our way down to there.
Then it goes in for the door.
It's about there.
And then all the way back to the back point there.
OK, so now we've divided into three sections.
Now let's divide it in half.
This point here, because this line here
just below the windows
is very close to that horizon line.
That means that it's almost flat.
So I'll put it there, just a very slight angle.
But I'm trying to give it a bit of a curve still.
Just a very, very subtle curve.
And then we have a door here.
It's about there, so it would come in a bit.
And continue along.
And then go back down again.
Point just there.
Just a little bit higher than this point.
We go our way across.
And we'll add in the door there later.
But first this door here, this front door.
We can see it goes to about here.
Just kind of roughly guessing.
And then coming down there.
Going back up.
The top of the door there.
Down like this.
Now we've got that shape there.
We want to now put the front windows in.
And this can be tricky because it is a curved surface.
So we want these windows to look like
they're wrapping around the front.
So we'll make sure we add in
a little bit of window here.
Which will help us see
that there is three windows.
Let's put some dots here.
So that's the front window
and that's the side window.
Perhaps we'll exaggerate
that this window needs to be
a lot bigger than this window.
So let's draw that top curve there.
And then another top curve here.
Now hopefully it looks like
it's wrapping around.
Now we're drawing this window.
And to there.
And then straight down again.
And now I'm drawing the
the wood section.
Like that.
And then curve around.
Just trying to follow that bottom line.
Click up again.
And then the inside line.
OK.
Then we've got that window there.
OK.
And we've got a line coming across here.
Which will really help us with those windows.
So let's go that.
Just follow that horizon line.
OK.
So now we need to do these windows.
So I'll start.
I'm just going to draw some vertical lines.
And do some vertical lines here.
And here.
OK.
And then we want to divide this into three.
So I'm just going to put one line there and one line there.
This is going to be the biggest one.
And then this one.
And now we can divide this.
Make it slightly smaller than this one.
And then even smaller.
Do these top windows.
Add those in.
Put them in loosely.
I can do it more roughly now because we have a guide on where to go.
I love these old trams.
Got nice bits of timber in them.
And when we lived in Germany, my wife and I, we used to travel on trams into the city.
And it was so good.
So we've got those tricky windows in.
And we'll also add some rectangles here.
And my lines are quite wobbly.
But they're all inside this framework.
So that's why it still looks in proportion.
You can see here.
That front bit there wraps around.
So make sure it's circular.
It comes to there.
And that's where these lights are.
So one light here.
Just oval shapes.
This one's more circular though.
And then we have that light on the front.
So I'm going into more details now because we've got all the main shapes.
But if we draw a line from the middle of that window down.
And then this light here will be an oval.
Just going nice and vertical like that.
What else are we going to go into?
Maybe the details at the top here.
Good to get done.
Something there.
There's a little number on the front.
And then up here.
We'll do this shape here.
Now because we've done all the crazy proportions there.
Now we can get a little bit looser.
So hopefully I can hold my pen a little bit more loosely for some expressive lines.
And I'm just impressionistic sketching here.
There's lots of details that can be overwhelming at first.
But we know it's all in the right position.
So we're just adding in the impression.
There's something complicated there.
And it's that wire electricity cable running up to the rail.
And like this little details there.
And you can see.
We've got almost little panels running.
And that's great because we can show the curve of the top of the roof like that.
Little rivets.
Now the details in the bottom.
And we want to continue that curve around again.
The front part.
Some things you can see here.
You can just see it subtly there.
We'll add a little bit of the tram.
The tram line here.
So from the wheel.
Go like this.
Once again following the other lines here.
Continue it up there.
Quite flat there.
Great feature here.
The light.
The mirror.
And it has actually a windscreen wiper here.
So it's really great sketching these.
Because you have to look at it so carefully.
Let that dry.
I've rubbed out the pencil.
And now we're going to do some watercolor wash.
The first step is to add some very light color.
So I've got Payne's Gray.
And I'm just going to block in these different sections here.
So just going across the whole area here.
We can add in some ultramarine in there as well.
Could look nice.
Back down there.
So let's do that here.
Around that light.
Pulling it around there.
And then on this side too.
Section here.
And as we go across.
Add some ultramarine into the mix.
Now we have the orange.
But I'll add a bit of yellow.
Just to this section here.
Because the light is sort of focused around this area here.
So that's why I'll start with the yellow.
Canyon yellow.
And then I'll go to the canyon orange.
It's a nice bright orange.
Go back there.
Keep the light still.
And the orange goes around this section.
Door.
There.
There is a little bit at the back here as well.
I missed drawing that door.
But that's okay.
Now we'll get the burnt sienna.
Burnt sienna.
Let's try adding burnt sienna and cadmium red.
Let's see what sort of red I get in there.
And we're going to do the front.
That's a bit up here.
And using that same burnt sienna and cadmium red.
To do the frames around the windows.
I've got a frame in there.
That window.
And across.
I've got a little bit of a window frame around here.
And then around those windows we did before.
They come down this side.
Payne's grey just there.
Now we're going on the underside.
Payne's grey.
And we're going to mix that with some violet.
And we'll have our ultramarine ready as well.
Mix in a bit of the violet here.
The windows would be a mixture for me with Payne's grey.
And a little bit of purple lake.
And maybe perhaps if they get further back.
We'll make them more filled with Payne's grey.
I just wanted them to look different to the other areas.
Where I've used Payne's grey.
Ultramarine in there.
Some yellow.
And the building behind the tram is a pinky reddy colour.
So I'm not going to draw the windows.
So what I'll do is I'll add a background.
And then with my white pen suggest the windows later.
So I'll start.
More pink than I was thinking.
And down here we need a bit more of a shadow coming off that tram.
And we'll add this down here.
Some more ultramarine in there.
We're going to make the light in the middle here.
So I'll add a bit of purple on this side.
And a bit of purple here.
This purple lake.
And then use my water brush pen just to add water to blend it out.
So it's just mixed in.
And also add some shadows up there.
So let's get some Payne's grey.
And also mix it with some ultramarine.
And let's add these really dark shadows in here.
A few there.
Darker.
Even darker.
And these sections of the signs are also darker than the top.
So I add these in.
Make that just slightly darker.
I want these.
We can add a bit more saturation.
So we get some cadmium red.
Put it on my old brush.
Spray it on.
A bit there.
OK I'll let that dry and then we'll add in the highlights.
So I've got my Uni-ball Signo pen here.
And we're going to do some highlights.
So we'll make sure we get the top edge of things.
See if that works.
This.
The lines here.
Just edges.
Make things stand out.
So this edge here would catch the light a bit.
And lots of light here catching the metal down here as well.
Little glints of light.
And across the sign.
We have a number here.
Two.
And inside the windows.
And I might add some little lines here where the pavement is.
And the windows.
They come down.
And go a bit.
So I'll use that just to do the windows.
OK so I'll go to my Posca pen.
And put in some letters here.
Not copying exactly.
Just putting something rough there.
I think those details really help.
So there you go.
There's the tram.
We worked out the perspective first.
Then we did the silhouette.
Made sure all the things are in the right perspective.
Then we put in the main shapes.
The details.
Laid a light wash on top.
And then put in the details and the highlights.
Thanks to all my patrons who helped me choose this reference.
I'll be putting the high res reference with the video up there.
And I've also got this tutorial here which was the second most voted reference.
So I'll put that up there for my sketching school tier.
But thank you so much for watching.
And I'll see you in the next one.
