“Test nhanh có chính xác không?”, “test nhanh dương tính phải làm sao?” hay “test nhanh bao lâu có kết quả?” là những thắc đang được rất nhiều người quan tâm khi dịch Covid đang diễn biến phức tạp. Theo Bác sĩ Lê Thị Thanh Thủy, Khoa Kiểm soát nhiễm khuẩn, Bệnh viện Đa khoa Quốc tế Vinmec Times City, để test nhanh tại nhà bạn cần tránh những điều sau:
1. Không bảo quản kit test nhanh tại nhà ở ngăn đá tủ lạnh 2. Lấy kit test nhanh từ tủ lạnh ra 30 phút mới sử dụng 3. Không dùng test nhanh tại nhà đã hết hạn sử dụng 4. Không mở khay thử của kit test nhanh quá sớm 5. Thực hiện test nhanh ở thời điểm phù hợp 6. Không làm nhiễm bẩn sản phẩm 7. Chú ý không lấy mẫu sai góc và độ sâu 8. Sử dụng que thử khác nếu mẫu bệnh phẩm sau khi sử dụng kit test nhanh tại nhà bị lẫn máu 9. Không ăn uống, nhai kẹo cao su, đánh răng hoặc hút thuốc trước khi xét nghiệm nước bọt test nhanh tại nhà 10. Thêm quá nhiều hoặc quá ít giọt dung dịch đệm 11. Đọc kết quả quá sớm hoặc quá muộn sau khi test nhanh.
Khi có kết quả test nhanh, dù âm tính hay test nhanh dương tính thì bạn hãy nhớ độ chính xác của test nhanh cũng còn tùy thuộc vào chất lượng sản phẩm của từng nhà sản xuất, giao động từ 30- 40 - 90%. Để khẳng định chắc chắn test nhanh có chính xác không thì bạn cần liên hệ với cơ sở y tế để được thực hiện xét nghiệm PCR, nhất là khi có các triệu chứng nghi ngờ.
Hệ thống Bệnh viện Vinmec trên toàn quốc: https://vinmec.com/vi/danh-sach/ca-nu... ------------------------ Bản quyền thuộc về Vinmec Copyright by Vinmec ☞ Do not Reup
Then everyone will be fx, x baby fat, x primary school, x university, it's all fx.
The recent open-mouth policy of the online community has partially reacted to the psychology of living with COVID-19.
To ensure safety, in addition to performing 5K,
fast testing at home is used by many people to actively detect COVID-19 early.
But not everyone knows how to test COVID-19 at home.
Here are 11 things to avoid if you test COVID-19 at home quickly.
According to Dr. Le Thi Thanh Thuy,
the Director of Infectious Diseases and Infectious Diseases,
Phinmed Tham City International Hospital.
1. Do not keep the test kit in the freezer.
Fast-acting devices should be kept at 2-30 degrees Celsius and in direct sunlight.
Keeping it at a higher temperature can cause the protein in the tested to mutate,
causing the wrong result.
Therefore, you can leave the test kit at room temperature in the winter
or in the freezer,
wrapped in a separate bag,
2. Take the test kit out of the fridge after 30 minutes of use.
The test kit will not work well in the cold temperature.
This tested product should be kept at room temperature
from 15 to 30 degrees Celsius before testing for about 30 minutes.
3. Do not use the test kit after the end of use.
The test kit is specified by the manufacturer for the time of use to ensure quality.
Although the longest type can be used up to 2 years,
you should pay attention to the quality of the test kit,
because expired products may contain chemicals or chemicals
that have expired or mutated, resulting in a wrong result.
4. Do not open the test kit too early.
You should only open the test kit out of the freezer
when you are ready to start the test.
Opening the test kit early without using it can lead to a negative result.
5. Do the test quickly at the right time.
There is a question that many people wonder about.
After contacting F0 for a long time,
should you test to get an accurate result?
Usually, you can't detect SARS-CoV-2 in 2 days after contact.
It takes an average of 3 days to detect a positive result if infected.
You can't detect the virus after contact for too long,
after a week to 10 days, for example,
because the virus has mutated and the patient is now positive.
6. Do not touch the product.
Be careful not to touch the tip of your palm with your finger
or contact other surfaces.
It can lead to an inaccurate test result.
7. Be careful not to take the wrong size and depth sample.
When putting the sample into the nose,
you can put it in the wrong size or not at the right depth.
So instead of taking the cotton swab straight up,
try to go in a horizontal direction
and gently put it into the nose about 2-3cm deep.
Then gently rotate the sample into the nose
according to the number of times your test suggests.
8. Use another sample if the sample is bleeding.
The blood on the sample will give you an inaccurate result.
You should do another test when the blood has stopped flowing
or just take the sample on the side that is not bleeding.
Do not use the sample required outside the nose
if you are prone to nose bleeding.
Instead, use the cotton swab test.
9. Do not eat, chew rubber candies,
bite or swallow before testing the swab.
These things can give an inaccurate result.
So make sure 30 minutes before taking the swab sample
you don't do these things.
10. Add too much or too little antipyretic.
Add the correct number according to the instructions on the kit
will ensure that the substance moves on the surface of the test
for a specific time for an accurate result.
11. Read the results too soon or too late.
Read the results at the time stated in the instructions.
Reading the test results too soon
may give you an inaccurate result.
And if you read the results too late,
it may give you an inaccurate result.
After testing,
you should wrap any component of the tool
in contact with your nose or swab color,
cotton swab, test tube, test material,
test equipment in a plastic bag
and put it in a trash can to avoid contamination.
When there is a test result,
whether negative or positive,
you should remember that the accuracy of the quick test
also depends on the quality of the product
of each manufacturer,
ranging from 30, 40, 90%.
Therefore, to be sure if you are infected with COVID or not,
you need to contact health facilities
to get a PCR test,
especially when there are suspicious symptoms.
Please share the difficulties you face
when testing for COVID
so that Vinmec can answer for you.
I wish you all good health and safety.