Longines Restoration - A Fallschirmjäger's Golden Gift

Restore all old things
33 followers
Now this watch belongs to a guy called Sandy and we're going to have a chat with him later
but I do know that in its recent history it's spent at least a few years behind a chest freezer.
Now the movement inside this watch is is frankly just weird and the story of how it came to Sandy
is really interesting so yeah sit back and relax and let me show you what I mean and let's let
Sandy tell the story of this really interesting watch by launching. That's nice that now that is
pretty. Now this case of course is 18 karat gold solid 18 karat gold that is a nice touch on the
back there but yeah hopefully underneath the dial is all right but we'll see that later.
Let's just check out oh okay that looks good the at least the motion work is working oh that's not
good the stem just fell out. So let's have the back off this and that came off really easily.
Let's take a look oh now I was not expecting that that is that's actually quite weird.
Yeah the rotor is a bit loose here but also the rotor looks like no rotor I've ever seen.
Hey Richard. Sandy how's it going? Yes how's that better? Yeah that's much better in fact you're a
little bit loud so I'm just gonna I'm just gonna change a microphone here just so that you don't
sound like a Dalek. How long have I had this watch? I don't know I'm a bit relaxed about it.
When we last spoke you talked about the history of the watch and it's actually quite interesting
so if we could just revise that a little bit. Yeah sure sure so I mean it was given to me by
my godfather which is not enormously you know exciting in and of itself but he's an interesting
guy I used to see him when I went up home to Scotland from time to time and you know I was
dropped in and he just one day just pulled this thing out of his pocket and said I'd like you to
have this and it was a grand jean flagship and it was that. So his background he was in the German
army during the second world war he was he was a full simiargar so effectively you know paratrooper
and I think he was at Arnhem and he was at various other places but ultimately he was taken prisoner
and ended up as a prisoner of war and then he was sent to work as a farm labourer in Scotland
and he never went home and he became absolutely you know part of the paratrooper society in
southwest Scotland in Galloway and became very good friends with my parents and and he was my
godfather so so that was a sort of it's not so much the story of the watch but more the story of the
of its origins and and and how it how it came to me. Do we do we have his name? Yeah see he was
he was one of many so there was no he wasn't sort of decorated general or anything um there's
nothing online but but it was got you know William Sucre. Okay is William still alive? No he and he
died a good few years ago um I mean in time of flies it was certainly more than 10 years ago
I pulled the chest freezer out because it's in the garage pulled it out of cleaning behind it
and there it was down the back of the chest freezer it's brilliant and what happened of
course is that the pin in the and you'll know the technical bits the pin that that watch strap
slides into it come off yeah of course as I went into the freezer with my arms straightened out
it popped off and slid down like a ski jumper down the back of it down the freezer lid and
shot down the back of it never to be seen again of course I didn't notice it and I thought I'd
lost it completely. Okay let's get this weird looking rotor off not actually ever seen one
like this before and before we go any further let's see if we can get the watch to tick
put a little bit of power on the mainspring and uh nope doesn't want to go
try and encourage it with a puffer no watch doesn't want to work at all so let's get into it
starting with part of the automatic works you know this watch is really nicely finished
the way in which it's put together the kind of design of it is very very different but the finish
when you're working inside this watch is it's like it's like working inside a Rolex of the era
yep the crystal needs replacing and we've also got this
internal part that's got to come out of the case before we clean it
subscribing is free and yeah why not take a moment to do that let's flip the movement over
and we're gonna take out the motion work now
just take this plate off that holds down the minute wheel come in with my little tool here to
liberate the cannon pinion there it goes and not to forget this tiny little intermediate wheel
very easy to flip the movement over with that one and lose it so time to disarm the mainspring
now the spring in this caliber the mainspring is actually a sealed unit so we're not going to be
able to get in there and clean it so it's important that this spring has got some power on it
yep yeah that is pretty feisty so i think we're going to be okay there next thing we've got to do
is take out the most delicate part of the mechanism which is the balance and again unusually
a longine have decided to hold the balance cock down with two screws everybody else uses one
screw apart from that the balance is reasonably standard in terms of its design always pop it
in its own little container next we are going to take off the train bridge now there are a lot
of pivots under here taking it off is easy getting it back on will not be so easy again you can just
see the quality of the finish inside this watch really very very nice take out the reversing
wheels and we're now down to the barrel bridge let's take that out and take out the mainspring
barrel and underneath is the ratchet wheel because unlike any other watch of the period
the click and the ratchet is on the dial side of the watch now we are down to the
pallet fork so just removing the screws here for the pallet fork bridge we're in nice and close and
again you can just see the how shiny this is and this is this is before i've cleaned it
don't forget that little wheel there now this central wheel is actually riveted on and it's
held on by this bridge here but the screws are for some reason longina stuck them on the other
side of the movement so we have to flip it over to liberate it when we do this little wheel come
with it so we need to make sure we don't forget this little extra wheel here so flip the movement
over release the screws and those components just drop out the bottom voila now we can remove the
screws with a piece of rodico so the keyless works is also designed differently very reminiscent of
some early pocket watches the it actually uses a rocker which is unusual that's to toggle between
the different states there on the keyless works take out the click and it's time then to
clean this watch now there it is there's the full movement completely disassembled so these are the
two screws that hold the movement into the case and the one on the left that's been replaced at
some point and it's not the correct screw now i haven't got exactly the right screw
and the replacement the head on it is a little bit big so
i think i'm just going to take that down on the lathe and and then we can get the movement cleaned
up time to put the parts through the ultrasonic cleaner we're going to start by putting this
double screwed balance back on the movement which is a which is a helpful way of cleaning it
pop it in one of my tea strainers and then put the other parts that we're going to clean in
to these little cheap and cheerful but really effective little containers
in the bottle on the left is the cleaner on the right the clear liquid that is the rinse
and i'm only showing those here but actually i use a third solution as well and that is
isopropyl alcohol at the end when i've when i've done i've done with these two we put them in the
ultrasonic cleaner i don't use a rotary cleaner i don't really like them now before i start putting
this longine back together i just want to show you this because this is the watch that i make
under my own brand major which was my rank when i left the british army it's called the seawolf
and it comes in steel and black and bronze and isn't it pretty anyway check out the link in
description now here is the sealed unit then we can't get inside it first thing we've got to do
is lubricate the barrel arbor seating and then putting the ratchet wheel with the barrel arbor
on it and lubricate the central part of the barrel arbor replace this little pinion which is driven
by the mainspring a bit tricky to do that so i have to take out the mainspring just to locate it
and then pop it back on a bit more lubrication and pop on the
barrel bridge just get that seated down neatly and another thing about this movement the screws
that longine use are big which is really great i think this watch was designed by
some very talented and very bored watchmakers back on with the riveted central wheel
now place this on a movement cushion so that it holds it in whilst we
do the screws that retain it but as you can see now that is out of the cleaner it's even
more sparkly than it went in and it went in pretty sparkly so let's replace the train
the scary thing when you're a watchmaker doing this is counting the number of pivots that you're
now going to have to locate in the train bridge all at the same time even this last one here
for the sweet pan the second hand and let's put the train bridge on and
at this point i gloss over getting it all located but actually fair play to longine it was it was
pretty easy to do it and that's because everything is so accurate and once you're sure that it's
you can torque it up so now we can move back to the keyless works and just put in the setting
lever just holding that on having flipped over the movement and screwing that down and then
just checking its operation then some grease for the rocker which is the again ingenious way that
are doing the keyless works on here not normal way of doing it well not since about 1847
but rather elegant i think works rather nicely but does need a bit of spring
behind it and there is the spring so we're just going to locate that in now and on with the
a little bit of lighter lubricant for the intermediate wheel
and also for the minute wheel just hold that down with the securing plate and the little screw
and replace the click having replaced it we just need to check its operation make sure
it's working fine and it is and onto the pallet fork pallet fork is very tiny
and we're going to have to put some special grease on we use mobius 9415 for this
and we have to lubricate the correct edges of the jewels now it's very easy to put too much
lubricant on here and what i do afterwards to calm it down a little bit is just drop it into
some alcohol and then we place it onto the movement and then using the microscope make
absolutely sure that the pivots are in now we can go back to the automatic works
and replace those finally we can put some power on the watch because we're going to get the
moment of truth in a moment where we put the balance back on first we need to clean the
balance in some b-dip just agitate it with a blower now this particularly with this
double screw arrangement is a tricky thing to get right but there we are we had power in the train
we got the balance back on and that is some nice high amplitude so very chuffed with that
back with longines innovative rotor with the drive teeth at the edge
and some lubrication for or between the cannon pinion and the hour wheel
and then we're going to put the foil on the top
replace the dial very carefully
and replace the hands first one the hour hand and there we go we have a working watch
