Carving A Stupidly Easy Whittle- 5 Minute Wizard

Wood carving: Tips and Tools
229 followers
All right guys, today's project is so, so, so simple.
It's a five minute wizard.
This is a runoff of the Tom Hines carving project
that you see Doug Linker, Gene Messer doing.
Look at that, very simple.
In fact, this is the version that we do here
a lot simpler even.
So if this sort of carving deal intimidates you,
this is an awesome place to start.
There's just one tool used here,
a one and a half inch knife,
and we'll get into the other auxiliary little trinkets,
but really not much else, a ruler and a pencil.
This is in a one and a half inch piece of basswood.
Again, get all into that in a moment,
but absolutely, you can do this, all right?
Trust me, you can do this.
That being said, this video is sponsored
by Wood Carving Illustrated.
Wood Carving Illustrated is a magazine
providing incredible content
from great instructional step-by-step articles
to how-tos on sharpening and dust collection
and shop setup, so much more.
I love getting the magazine.
It's a fantastic experience getting that thing,
opening it up, seeing all the interesting stuff.
There's just nothing like that.
So use the code CARVER, C-A-R-V-E-R,
C-A-R-V-E-R, I can spell,
and that code will get you a whole bunch
of free goodies from myself,
as well as Catherine Overcash and others as well.
Really great, helpful tips
and instructional articles there you can get.
So check that out in the link below
and use the code CARVER.
That said, let's get into this project.
Sunny, well, cloudy, but it was sunny.
It's raining out there, we're on and off sputtering,
but it's just beautiful.
I've got the doors open.
And today I figured I would come at you
with a really simple carving.
This is a five-minute wizard.
This is based off of a Tom Hines carving.
This is a very straightforward beginner project,
a starting point if you're totally new to carving.
And we're gonna walk through this slowly together.
It might take us a little longer than five minutes,
but the idea is once you get skilled at this,
you can do it very quickly and easily.
So I've got a piece of basswood.
This is 1 1⁄2 by 1 1⁄2 square cut diagonally.
And it's about 3 1⁄2 inches long.
And so you can do this in a longer or shorter piece.
You can do it in a one-by-one or a two-by-two
and scale it up or scale it down accordingly.
So without further ado, I've got a handful of tools here,
not very many.
I've got a bench knife.
This is an inch and a half or so bench knife.
This is made by Badger State Blades.
I've got myself a ruler, a pencil, and a strop.
I always have a strop handy because you never know
when you're needing a little bit of tuning up
on the old tool.
Strop is for sharpening if you're not familiar.
And it's a piece of leather on a piece of wood
that I've got holding compound on the rubbed onto the leather
with a product called ZAM.
And ZAM is a nice one that I recommend.
And I have that in the description linked below.
Okay, so to start this,
I want to really quickly get a general idea
of the overall outline.
So two inches from the top here,
I'm gonna make a marking.
Now I can use a pencil.
I've already got the knife in my hand.
So I'm just gonna make a marking with that.
But so that you can see it,
I guess I might as well just kind of mark that out
a little bit better for you to see, okay?
So we've got that indication there.
That's the two-inch mark.
At that two-inch point, I'm gonna take my knife
and please do wear a glove when you're doing this
because a glove can protect you
from a whole host of problems.
But I'm gonna come in and my knife, nice and sharp,
I'm gonna push straight in,
straight into the wood like that.
And then I'm gonna cut up to that point.
And once again, back and forth.
And you'll hear something.
That chip has fallen.
And that's how you know you're at a spot
where you can proceed to make that cut over again
if you need more depth.
And I'm gonna come in with about a quarter inch
worth of depth here on that cut.
So you can see there, this is gonna be where the hat is.
Now this hat's gonna be nice and long.
He's gonna be sort of a gnome wizard type character.
And so to take this side area down,
I'm gonna use my knife with a paring motion.
So what's important to note when you're carving,
it's an important safety thing here,
is that you wanna always try and carve in such a way
to where the destination of the blade is never your hand.
Don't destine the tool for your hand, right?
So always try to keep that thumb out of the way.
So it might look dangerous from certain angles,
but what I'm doing here is I'm actually pulling
the wood through and missing my thumb.
I've always got my attention set
on where the tool is going to be.
Another trick here, you can use the natural serration
of the tool if you've got a duller tool.
You should definitely go ahead and sharpen it.
This does not make up for a dull tool.
You can kinda slide the wood through the material like so.
Using a sliding motion can sometimes
help you move through the material.
Another tip, when you're doing a stop cut,
if the relief cut, which is the cut that comes up
against that stopping cut, does not come loose,
it means you probably need to go back over your stop cut
and then over your relief cut.
And if, yep, there it is, see, now it's falling out.
So make sure and go back and forth
consistently between those two cuts.
Don't just keep pushing, expecting it to free the chip.
You probably will end up with a cracked piece.
Now as far as grain structure goes,
this is more intuitive than anything else.
There are rules and I could explain those to you,
but at risk of boring you to death.
If the tool is cutting and it seems to start
to be biting into the wood like so,
you don't necessarily want that.
And see how I lost the control of the wood?
We're fine in this case.
But otherwise, that could be a bad thing.
So keep in mind that if you start to lose control
of your blade, you need to turn the direction
of the knife around and go the opposite way.
Okay, now to match this side up,
just to show you that that's not the end of the world
if something like that does happen,
I'm gonna take this other side down.
All right?
Very cool.
So I'm gonna take this cut and I'm gonna continue this line.
I could actually draw it out with a pencil really quickly
so you can see.
Turning downward, this hat's gonna have
a downward tilt to it, just like so.
And I'll come back in with a stop cut along that line,
rocking that blade over that line.
Again, wear a carving glove, way safer that way.
Just like so.
Okay, believe it or not, we're fairly far along
in the setup for this project.
It's very simple.
So stay encouraged if you're kind of feeling like,
what the heck is he doing right now?
Just follow along and we're gonna get to something
very neat in very little time.
So we've made that curve.
Now, as simple as sharpening a pencil,
we're going to taper this hat, right?
So in the same way, we move our way around the pencil,
turning it as we go to get that thing nice and sharp, right?
Because who needs pencil sharpeners
in a woodcarver's workshop?
I'm gonna do the same thing here,
taking a little bit at a time,
carving away from my body, away from my hands.
Just like so, carving away from myself, tapering that hat.
Now, I'm kind of speeding this up.
I don't want you guys to get any more rushed
than you ought to be here.
So just keep in mind, I'm rushing this for this video.
I'm trying to take more material out per cut
than you probably are with your own project.
So slow yourself down, enjoy the process,
and don't be like me, rushing through this sort of thing.
Okay, one fun thing that we can do at this stage,
imagine that your pencil lead is kind of wonky,
and you actually want to take that lead and turn it over.
So we can lose the pencil analogy, you get what I'm saying.
I'm gonna take a little bit more out of one side,
and that's gonna give the hat a nice little turn.
Okay.
Just like that.
Beautiful, now that we've got that turn in,
I'm gonna take a measurement with my pencil once again,
and we're gonna come down about a half an inch,
about a half an inch from the brim of that hat.
Ah!
No, don't worry about that.
Half an inch from the bottom of that hat.
Pick up the tool on the ground,
and I'm gonna come in with another one of these stop cuts,
the same cut that we made up here at the hat initially,
where we're going in with the tool,
stopping the grain from moving any further,
and then cutting to that cut,
and repeating that process until that piece comes free,
just like that, okay?
And I'm gonna go slightly less deep
than I did initially with that hat,
maybe less than a quarter of an inch at this stage.
Just under, okay?
And now I'm going to take my knife,
and I'm gonna go on either side of that line.
If we want to actually establish a center line,
it's a great, great idea, so let's do that.
Let's just draw a center line here.
Right along the corner.
That corner left behind is gonna tell you
where that center line should be,
which is a nice cheat code.
And I'm gonna make a stop cut along the brim of that hat.
Going along the brim of that hat with a stop cut.
And either side of that line,
I'm gonna make cuts.
And we're actually kind of getting back
that pointed shape that we had initially,
that we lost when we started to round that hat brim.
All right, so coming back and getting that V shape,
just like that,
setting that V shape into the piece of wood, okay?
All right, now if you have a V tool,
this is a great time to use it.
If you don't, well, join me.
I'm not gonna be using one,
so we're keeping this ultra simple.
We're gonna do a stop cut here along the hairline
of the beard and the mustache.
Okay, now to do that, I'm gonna take my knife,
and I'm gonna carve a line just like so,
coming off of the corner of what will soon be the nose.
Let's draw it.
I keep getting ahead of myself.
See, I'm excited.
Let's just draw that V in so you can see
what I'm after here.
We'll draw that on the other side as well, okay?
Just like that, almost like a check mark
with a longer side on the outside,
a shorter side on the inside.
Okay, now we're gonna make the incising cut
along those V lines, being very careful here
not to puncture your own hand.
Just take your time.
Enjoy the process, okay?
Just like that.
Okay, and then a relief cut.
Now I'm coming down here with just a little bit
of an angle towards that line
and not removing a lot of material,
just a little bit at a time.
See, just sneaking my way.
Carving towards that line so you get a little ledge there.
And now we'll carve towards this short end
of the check mark, just like so.
And if we have to, which we'll have to,
go back over that stop cut, back over that other stop cut,
and repeat that process.
Just remove a little bit,
angling slightly downward here,
slightly turning that blade.
There, you can see the angle.
There it is.
That's what we're after.
We'll do it on the other side.
Turn the tool, carving upside down.
Just like that, one cut,
and come back over to the other side
and make the other cut to the beard.
Now the reason we're cutting away atop the beard
is because we want the beard to appear
as though it's growing out of the face,
and so it has to stick out above the face.
So we're removing the face material, the cheek material,
just like that, okay?
Now it kinda looks awkward
because we haven't defined the sides of the nose,
so let's go ahead and do that.
Let's go ahead and define the sides of the nose.
You can see I'm going back over this one more time,
and that's okay.
Defining the sides of the nose,
we're gonna come in with a measurement,
and we're just gonna guesstimate here.
We're gonna say about, oh, 3 1⁄8 of an inch.
Let's make this about 3 1⁄8 of an inch wide.
So we're gonna center that marking from here to here
at about a 3 1⁄8 inch distance.
I'm gonna come in with my knife along that line once again,
straight in this time,
using the tip of the tool to go into the wood.
I'll show you again in slow motion, right?
And then I'll come in.
Notice the angle, I'm slightly turned inward,
so I'm going into the wood like so
with a slight inward turn.
And then finally, a cut angling upwards,
slightly downward turned angle there to remove,
and that's gonna create what's called a triangle cut.
I can go make all those cuts over again,
straight in, slightly angled inward,
and then removing.
See that little triangle being removed there?
That's what we're after.
Okay, the same thing here.
Material there.
And a stop cut here.
Guys, this is such a simple and fun carving,
I cannot tell you.
And you can already start to see what's happening here,
right?
I'll just clean some of these hairs
that we see with some stop and relief cuts.
And you know, this is the type of carving
you can absolutely leave the flat planes
that your knife has made in
and let the wood do the work for you.
Let that be the juicy detail
that makes this thing wonderful to look at.
And people for years to come will see it and say,
oh, you know what?
That was hand carved.
Look at those lines.
You see the grooves on that?
That's very cool.
People will appreciate the hand carved quality of the piece.
And so many times we're trying to get rid of all the lines.
I spent my whole life making carvings
with very tiny little cuts
that I've sanded away with sandpaper.
It's kind of a shame really.
So I've learned from experience
to not carve away all the little signifiers
of the fact that this was made by hand with love.
Okay, so I'm just kind of leaving those marks in,
not worried about them going away.
You can shrink them up if you want to split them in half.
In other words, you can go right in between two cuts,
two planes, like so,
and take the corner off of it
if you really want to get fancy with it.
But even that's not necessary.
Okay, now we're gonna take the corners
off of the bottom of this beard.
And I'm gonna use the knife to take,
literally just pare down the corner edges of the beard
all the way around, taking the corner down at the top.
Just like that.
Now, I want you to understand
that if this is your first ever carving,
you're gonna need to be stopping and starting this video,
and you're probably already doing that
if you're new to carving, all through this project.
Because, you know, it's very difficult
to get a feel for the tool in your hand
if you're new to it.
So let yourself get familiar
with the hand-to-tool relationship,
and just enjoy the process.
And don't worry too much about the outcome just yet.
You can always start from scratch again.
And, you know, it doesn't cost very much.
This is such a small piece of wood.
It's not really a big deal.
So keep that in mind.
Okay, so the next thing I'm gonna do
is create the mustache.
And that's very, very simple,
so don't get nervous about that.
All we have to do is come down,
say, about a quarter of an inch from the nose,
or probably even less.
Honestly, let's see.
Let's give ourselves a measure.
Yeah, let's say 3 16ths.
3 16ths of an inch from the bottom of that nose down.
We're gonna make a V shape, just like so.
So watch as I'm coming in.
Boom.
And boom.
So really, what we're looking at,
just to make things a little bit clearer with a pencil,
I'm making a line on this side and on this side.
Kind of following.
Actually, I am.
I'm following the line of the top of the mustache here,
where we were before.
Just like that, okay?
Boom.
Going in along those lines.
The tip of that knife should be meeting
at the center of that V.
And then coming back in, cutting towards it.
Be very careful not to cut your fingers.
Again, if you're not wearing a glove
and you're new to this, then you're doing it wrong.
Put on a glove.
Keep yourself safe.
Okay, and just coming underneath that point.
How about that?
I'm sorry, guys.
This is way too much fun.
Look at that.
And we'll just come in.
Take off any of the leftover saw marks from the saw blade.
Just like so.
And take the corners out of the bottom of the nose there,
just like so.
Beautiful.
Okay, now we could continue to round
the mustache and beard area by using that knife
to kind of take out some of the leftover saw marks.
And the big flat areas.
Notice all these little facets I'm trying to create.
So I'm just taking down some of these big corners
and rounding them out a little bit.
Tucking that lower area of the beard
underneath that mustache is also important here.
There you go.
Okay, now if you really wanna get complicated here
or get fancy, you can actually take your blade
and do what's called a scoop cut.
This is kind of an advanced cut.
Let's redefine our center line here so we don't lose it.
It's kind of easy to see, though,
because you've got that nose line.
I'm gonna come on either side of that nose line
and take a little scoop.
Now, notice as I'm bringing the tool through,
I'm turning the blade up, like so.
Okay, just like that.
Same thing here.
See that?
Little scoops on either side.
Now, you can use a gouge for this
if you're a more advanced carver,
but you don't need to have one.
You can just use your knife.
Scoop through, and you can practice this scoop cut
on scraps of wood.
You know, for instance, I've got one here.
I can just practice on it.
Notice that I'm turning the blade.
As I'm moving it through, I'm rolling the blade with my hand.
Sometimes you have to use your hand to do that,
your wrist to do that, rather.
You're not used to that, but that's the idea.
Okay, guys, now I could just go ham with this
and make it all sorts of complicated,
but I don't know that it really needs it.
I think this is a really great starting point
if you're trying to learn to carve a beard,
a man, rather, with a beard, a little character,
and, I mean, come on, how much fun is that, right?
So this is, took us a little longer than five minutes,
but once you've kind of mastered this,
you can really knock these out quickly
and then paint them and get all kinds of great designs
going with an acrylic if you wanted to,
paint the hat a different color,
give the beard a nice, light wash.
We've done that in other projects,
and you can see that on many other
Carver's projects on YouTube.
There's fantastic stuff out there.
Linker has some amazing tutorials on carving
or painting these types of characters as well,
so check those out.
Check out Gene Messer.
He's an incredible guy as well,
doing very great versions of these carvings
and painting them in some cases as well.
So I hope you guys enjoyed this
and had as much fun carving it.
I swear these guys give me as much joy
as these carvings I work on for hours do,
so it's a ton of fun.
Enjoy this, guys.
Have fun with it, and we'll see you in the next one.
