Sew Leather With Regular Sewing Machine

DIY Crafts & Art
164 followers
What up, fam?
Today, we're gonna learn how to sew leather
with a standard sewing machine.
Stay tuned.
So if you've been watching this channel
for any amount of time,
you know we do a lot of leather projects here.
And so far, all of them have been hand-sewn
because one, it's the only thing I know how to do,
and two, I don't have like an industrial sewing machine.
But then I ran across an article that shows
how I can just use my standard sewing machine here
to actually sew leather.
And I just figured you'd probably
wanna know how to do this too.
Okay, so the sewing machine I'm using here
So the first bit I wanna address
is the kind of thread that you need to use for leather.
Because of how thick and tough leather is
and the kind of stress that's usually put on the seams,
regular thread just will not hold up.
Instead, you're gonna wanna pick up
either like a heavy-duty all-purpose thread
or an upholstery thread.
To demonstrate the difference,
here's some regular thread tied to a five-pound weight.
If I let it go, it breaks right away.
And here's the heavy-duty thread.
Check that out.
So strong.
Now, because this thread is a little bit thicker,
you're gonna be getting less on a bobbin,
so make sure you plan your project accordingly.
Oh, also, with hand stitching,
you want to use a wax thread,
but you do not wanna use it with a sewing machine.
It's gonna have trouble feeding through the needle,
the wax is gonna get all on the internals
and just completely mess everything up.
All right, the next thing we need to make this work
are leather-specific sewing needles for your machine.
Unlike regular sewing needles,
which have kind of a blunted point on the end,
these have more of a spear-shaped point
designed for piercing through thicker materials.
This is because with regular sewing needles,
they're designed to actually go
between the weave of the fabric,
not really making new holes.
These ones are gonna pierce a hole into your leather,
so make sure that you're doing everything
as well as you can because there is no going back.
You're going to have a hole in the leather when you're done.
This is definitely something you wanna try
in some scrap first before you attack your expensive project.
Speaking of which, because when you pierce holes in leather,
they are permanent, you can't really pin things together
like you can with fabric.
The solution to that are these awesome Wonder Clips.
They hold everything together really well
and leave no permanent marks.
Now because leather can be a lot more sticky
than fabric and fight you a little bit more,
you may find you need to change out the foot.
I've seen people online recommend using a roller foot
or a Teflon foot or like a little stepper foot,
but I am way too cheap for that.
So the easy alternative I read about
was getting some Scotch Magic Tape
and sticking it onto the bottom of the foot.
This is gonna help reduce the friction
and make the material go through a lot more smoothly.
Just make sure you cut away the tape in the middle here
where the needle actually feeds through.
Okay, so just a few more tips here to get you started.
When stitching with leather in one of these machines,
it helps to use the longest stitch length
that your machine offers.
This is gonna pierce less holes
and just make sure everything comes out
a lot more clean looking.
Now you may find you need to hold onto the thread
for a few stitches just so it doesn't get sucked up
into the machine.
After that, take it relatively slowly.
Remember, you only have one shot at this.
Those holes are permanent.
And also, your machine's not made for something this thick,
so you wanna give it time to actually be able
to make the movements it needs.
Finally, when you're done, you don't backstitch
like you would with normal fabric.
Instead, just tie off the loose ends of the thread,
snip them short, and melt them like you normally would
when hand stitching.
Now, I didn't run into any issues doing this with my machine.
In fact, it worked really well.
But my friend over at Corso Workshop
says that it could mess with the timing
a little bit of your machine.
So just be careful.
Also, you wanna stick with relatively thin leather.
The absolute thickest mine was able to handle
was about three millimeters or six ounces total,
which is honestly still really good
and way more than I expected.
And there you have it.
You now know how to use your home sewing machine
to make some epic leather projects like this mage hood,
a project which I am super excited to show you
on this Thursday's long episode.
So make sure you tune back in for that.
Until then, don't forget to hit me up that like and love,
and don't forget to subscribe
so you know when I release new content.
All right, I'll see you next time.
But until then, keep leveling up, you.
