巧做一個鑰匙包，手工有創意，生活有樂趣 手工布藝 #DIY快樂手工

First of all, let's do the zipper part. The length of the zipper edge is 19 centimeters, the width is one centimeter, the seam allowance is one centimeter, the face is one, the lining is one, and the length of the zipper is 21 centimeters. We clip the zipper strip to our zipper and the front of the zipper is facing the face We sew a thread, Turning to the front we sew a narrow edge on the side of the zipper These two parts are the bottom material of the small bag The length of the cotton is 13 centimeters and the width is 2 centimeters We put one centimeter of seam allowance one for the face and one for the lining We hold the face and the zipper part we just made is the same face As opposed to face, we sew this side of the thread and this end to connect the two ends, and after sewing, we turn the material to the reverse side, which is the side of the lining. Next, I will introduce to you the size of the main material cotton, the length is 11 cm, the width is 7 cm, 4 corners, we round the corners and put 1 cm seam allowance. The face is two parts, and the lining is two parts. We put one of the faces together with what we just did, and the combination is with the zipper on the side. Put it together here The center point of the zipper is aligned with the center point here and then the whole circle is sewn Now the circle is sewn Next we put the zipper in the middle and cover it with a piece of lining Let's sew it all round, leaving a return here, and when we're done, we'll turn it over. I left a little small for today's return and it was a little difficult to turn it over Next let's make a belt The length of the cloth is 35 centimeters and the width is three centimeters We first iron in a seam allowance on both sides take out a key ring we thread it into the middle and then we sew on the sides Next, we take out another face and lining, and then I make a sandwich on the lining. We stack all three materials together, and then we take out the cloth we just made, and we put it in the middle. Then sew the whole circle. We sew these things together. Next, we put these two materials together, sew a circle of raw edges, and wrap it with a wrapping tape. After wrapping the edges, we finish the bag. Although our bag is small the zipper must be two-way so that our small bag can be lifted That's all for this video Thank you for your precious time to watch my video Remember to help me like it See you next time