電烙鐵焊不住怎麼辦?只要用這個方法,新手也能焊的很牢固【我愛電器維修】
我爱电器维修
89粉絲
#電烙鐵#電工#電器維修
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
電烙鐵焊不住怎麼辦?只要用這個方法,新手也能焊的很牢固【我愛電器維修】
Many novice friends are using electric soldering iron
The welding wire
Or when you weld some electronic parts
It's not easy to weld it on
Even after you weld it on
It's also very weak
It comes off very easily
Where's the video today?
Let me share it with you
I have some experience with electric soldering iron
Include some practical tips
In the first place?
Let's take a look at this commonly used soldering iron
There are generally two kinds
One is this exotropic one
And then there's another one which is this kind of internal heat
I like this one internally heated
Because of this internal heat type of soldering iron
It is small in size
It is easy to operate
It's like this externally heated one
Look at this head. It's a little bigger
It's a little bit stupid. Look at it
Especially when it comes to operation
Take a look at this handle
Let's take a look at this externally heated version
Because this hand
What about this part
The distance from the soldering iron head is far
It's okay to weld some big pieces
If welding some small parts of the case
It's not easy to operate
Because it's too far away
It's not as short as this internal heat
To operate
Special welding of some small components is more accurate
Novice friends in the use of electric soldering iron
Generally divided into two cases
One case is this soldering tip
Anyway, how do I get this tin
He would never melt
And then there's the other thing that happens when the tin is dissolved
If you want to weld this wire or some electronic component
This Angle up here
He just doesn't stick to tin
So these two things happen
Let me share with you the first case
This is what happens
In general?
It's all caused by oxidation on this soldering tip
This kind of situation
What happens when you have oxidation
That's what we're gonna need
Just let him take care of it first
Yeah, let's get a piece of this junk
And then the board is dipped in rosin
On the point of solder
It's up here
Give it a good rub
Actually, after a little more rubbing
You can put the iron head above the oxide layer
Give it wear off
After grinding off can better adhere to the tin
Ah, after grinding, you can stick the tin
See no
And then after the tin
And then let's see
Let's try it by welding a wire
When you weld the wires first
I'm going to pull out a skin for this wire
And then you cut him a verse first
It doesn't have to be long
Just leave a portion
Leave as much as you want
Before the welding
First of all, first of all
A little bit of rosin on top of this line
Or to spot weld oil
Yeah and then give him some solder on this
OK have a look at
That's it. Let's start with some solder
And then on this board that we're going to weld
Is the same
Give him a little rosin before we weld
And this is when we weld the top
It will be very easy
Look at the
You know what? Right up there. See
The weld is still very full
And then the glue is very strong
Look at the
if
Let's take a look at this wire first
Let's give him a little skin and talk about it
All right, let's peel back the skin and take a look
There are other situations
He didn't put tin on wires or anything electronic
And in this case it's always this one up here
It is caused by oxidation on the surface of the wire
It's like this
We're going to get rid of this oxide layer
Looking for a
Give it a thin piece of iron or a razor blade
After you've shaved off all this oxide layer
And then we go to step two
And then it's a little bit of rosin and solder
That way, it's easy to see
It goes straight up to soldering
This makes it very easy to weld
good
Now I'm going to show you how to weld a wire
First of all, it's the same
Start by dipping the end of the wire in some rosin
On the point of solder
When choosing solder
If welding some small parts of the case
Try to choose this wire
Let it be a little bit thinner
In the case of welding large components
Thick soldering wire can be used
The solder wire I used is 0.5
Very fine
Because I often weld small pieces
After we put soldering on both ends
And then we weld it on top
When you weld it
First, put some solder on the tip of the soldering iron
And then you start welding on top
OK have a look at
Now?
You know, it just went right in
The weld is still very strong
