電烙鐵拆多腳芯片?3分鐘教你1招,超級簡單新手也能學會【我愛電器維修】
我爱电器维修
89粉絲
2024年3月14日 #電器維修
#電器維修#電器#線路板#電烙鐵#電工
哈嘍,大家好
分享通俗易懂的維修視頻
讓維修從此變得很簡單
專業(手機,電腦,監控,家電)維修
喜歡我就訂閱我哦
https://www.youtube.com/channel/UCma9sHXyCIBoYmC0PzDmLNw?sub_confirmation=1
電烙鐵拆多腳芯片?3分鐘教你1招,超級簡單新手也能學會【我愛電器維修】
Today I want to share this video with you
In the process of maintenance
What if one of these polygon chips is broken
How do we do that?
Um what's the easiest way to take it down
Some friends might say
Use a tin suction or some heat gun
I can take it apart
But like some computer people or some
Uh, people who don't usually do maintenance
Maybe once a year
What if you let him buy these professional tools
It's kind of unrealistic, too
Today I'm going to share it with you
Dismantling the polygonal chip is actually very easy
All it takes is a soldering iron
I can take it down
And when you take it down
When we go up and replace the chip
It's also very easy
Today I'm going to share this method with you
Before we disassemble the chip we need to find two flexible wires
As long as the inside of it is copper wire is fine
Mostly soft wire
And then we take it out of the skin first
OK, just peel it out
I know there's a black one there too
Peel the skin off it
We need to use this tool and a soldering iron
It can be very relaxing
Take the chip out of it
And then you take this wire
Give it a slight twist like a twist
Oh, just a few turns
And then you dip your iron in some rosin
And then what? Find it.
These silver horns of the chip
Put this copper wire on it and heat it up
And the idea is that
Use this tie copper wire to tie copper wire
Put the above
Suck the wire down and stick it down
Okay, let's see if you see this
I see it's all stuck down
OK
All eight pins are the same
I'm gonna glue it down
Put the solder on top
Stick down
See, the bottom is glued
And then you glue the top four negative angles
Suck all the tin off of it
OK, two more to go
Uh just suck the last two down
Let's take a look at it when we're done
Zoom in and have a look
The effect is still very good
Look at that. Look at the bottom
The solder includes the top solder
I've got it all sucked down
And then finally
Use a small pair of tweezers
I can just gently tilt this chip and it comes off
See no
It just falls off
OK, let's see
You took it down, right? And it works really well
And you can see there are eight holes in it
It is also very easy when we install it
All you need is this good chip
Put on it
OK put it on or after
Take these pins with a soldering iron
Just weld it on again
It's not just simple
And it's also very easy to use
This method is based on personal experience
If you have anything
In the case of better methods
Leave a comment in the comments section
Let's discuss it together
