打火機竟能做成電烙鐵？只要插一根銅線，3分鐘輕鬆搞定【我愛電器維修】

Just found out today It turns out the lighter has a hidden function All we have to do is stick a copper wire in it I can turn him into a soldering iron He is more useful in life For example, on top of these appliances at home If the thread comes off We can use it to weld straight on What if you buy a soldering iron in the case Like a soldering iron like this Well, actually, because they don't weld twice a year So it is not cost-effective to buy an electric soldering iron Actually, we are You can use a lighter Just make one It is also very convenient to use Today's video to share with you A method of making an electric soldering iron with a lighter The first step is to find a slightly longer piece of hard copper wire And then we have this part right here Give it a bend and a fold And when it's folded like this Then he put down a lighter And then look at this position And then we have this position right here Use a razor blade to thread this copper wire Peel this skin off of it The main thing is to use copper wire inside After peeling off the skin And then you get a screwdriver And then you take this copper wire Let's wrap it around a little bit I can wrap this around a little bit to make it a little bit tighter It should take about 34 turns After we take this screwdriver off Fix it with a pair of pliers Nest it like this And then do the same with this end and straighten it out Bai in such Uh, what's next for this copper wire and for him to do the front Cut a slant out of it All right, just cut it like this And then you take this copper wire Tie it to the lighter That's it and then tape it around If you don't have a lighter Actually, only one copper Wire is copper wire You can also make an electric soldering iron But that's a much simpler method I'm going to share this one with you And then share the second one Don't need Lighters can also be made in the way of soldering iron Okay, when we wrap it up And that's basically it So let's see Well, let's see So it's ready to use Let's test it out and see how it works, okay How about we test the tinning rate After the fire started And then you can put the solder on top Let's see, tin melts really fast I see the solder is all stuck up And then we'll test it by welding a thread Take a look at this weld How does this thread work This is an electric car charger The top line is broken Let's try to weld it To say "hello" Let's warm it up with the copper wire on top And then we warm it up and then we start welding on top We look at Tinning works really well The weld is very strong Let's take a look Look at this solder joint is very smooth It's very strong And then I'll share with you the second method In fact, if there's no lighter When I was a kid, when I was in elementary school I remember when I was welding these wire ends It's usually just a copper wire Hold the copper wire to it with pliers And then you cook it over a uh fire After it's baked red You can also solder the top wire directly This method is even simpler If you have a better way Let me know in the comments section Let's discuss it together