摺好後是個心形，小小的攜帶方便，分享摺疊購物袋製作 手工布藝 #DIY快樂手工

Hello everyone welcome to Happy Handicraft Our family has run out of shopping bags again so I'm going to start a series of shopping bags Today is the first one We prepare a square of 15 centimeters and then fold this material in half and cut it into a perfect circle of 8 centimeters We put it here and the three sides are against it Draw the arc Following the drawn arc we cut out the excess material We need two copies of the heart material and we need half of the heart material Then we sew these two arcs, leaving one centimeter for the seam allowance. When sewing, we leave one centimeter at both ends of the arc. No sewing Trim the seam allowance with lace scissors leaving 5mm Finally, we cut another knife in the middle of the two arcs, then turn the material to the front and iron it flat. This is the main material. Its length is 45 centimeters and its height is 35 centimeters. The material needs two parts. We decorate the heart shape we just made on the main material. The two raw edges of the heart shape are aligned with this corner. Then we turn this part up. This is not two centimeters without sewing. We sew a line here first, and then turn it down and sew the heart shape on these two edges. We decorated it on another piece. Next let's fix the handle After that the length is 50 centimeters and the width is 2.5 centimeters Turn the material over to the reverse side first iron in one centimeter at the mouth of the bag and then fold it down two centimeters Fix the handle 5 cm from both sides of the centerline. Then we put the handle in and sew a line here. Then turn the handle up and sew another line at the opening. The next step is to sew the reverse side of the two materials, sew the three sides, and finally nail two snaps on the new material. Today, we use plastic snaps, which is quite convenient. That's all for this video Thank you for your precious time to watch my video Remember to give a like See you next time