DIY- Kandil Lamp Making For Festive Decoration // Diwali Decoration Ideas // Puja decoration

Eisei-en Bonsai
37 followers
Hi everyone, Nigel Saunders here. It is getting towards the end of February and it's very spring
like here in the greenhouse. Today I'm going to be repotting my royal oak trees, they're English oaks
and I haven't repotted them for four years. I can't believe it's been that long.
I'll show you a quick recap of when I repotted them last in 2020. All the roots look good and
healthy so we'll take that over to the washing station and get them cleaned up. All right here
I go. Here's a look at the roots on these oak trees and you'll notice that there's just one
big taproot that runs down and a few fine roots coming off of it and I've dealt with these kind
of roots before on an oak. What I did is I just cut the taproot in half and then I got a nice
fine radial root system developing on the roots that remain. So it developed really nicely and
I'll do the same today. And then my largest one, it has a lot more fine roots up at the top so I'm
going to be quite daring because I don't want this curve here eventually. So I'm going to come in
and prune it off right here. Rather severe but here I go and that's what I'll plant.
Hopefully it'll survive. Now I will trim some of these longer roots off. I'll just
prune those ones off. So that is now ready to plant just like that. I'm going to plant these
all together in one pot so I'll need to pick a front for this tree and I think I'll have the
main part of the trunk forward. This one off to here right about there. I will make sure my roots
are nice and radial. Comb them out before I add the soil. These will all become surface roots
eventually and then I'll put some soil in to stabilize the tree in the pot. The next one
because it's smaller I'll plant it further back in the planting. So I think maybe there
would be there and the third one.
That's kind of all in a line isn't it? Plant the third one
in the back. I'm gonna yeah I'll change it around like that. I think that looks pretty good. I'll
fill it in and we'll see. I'm out front now looking at the arrangement. It doesn't look
very good does it? I like the number one tree. The tallest tree looks really good.
I think the smallest one needs to be closer to it and the two the biggest one and the second
biggest are too evenly spaced in the pot. So I think everything's got to be moved more towards
the main tree sort of as a more of a clump style rather than kind of spread out. So I'll change
that around. Now let's see how that looks. That's much better. I think that looks fine for now. I
mean these trees will grow and they'll change and I don't know what the final planting will
be of all these but for now you know you're making them look as good as you can. That was a look back
at my royal oaks back in 2020. So today I'll be doing the second root pruning of them.
It'll be interesting to see what the roots look like after four years. Here is a look at the two
trees today. I originally had three trees a small one back here but that one didn't make it. So I'm
left with two trees now. These are my oldest royal oak trees. They're grown from a seed and this will
be going into their fifth year now. I've been pruning the lower branches off of these trees to
get a nice clean smooth trunk line on them. So I'll continue that strategy just keeping my branches
higher up on the trees and my intent is to grow these into a medium to a large size bonsai
eventually. So step number one will be getting the trees out of the pot. I'm re-potting these trees
now because the buds are just starting to become active. You can see on some of them there's some
just starting to come out but most of them are still dormant but they're ready to grow
anytime now. So that's the reason I'm re-potting them in February. The trees are telling me it's
time and here in the greenhouse I can keep them warm after the re-potting so they'll be happy
until spring arrives. All right it's time to get the trees out of the pot. Let's see if they're
locked in here or if they're fairly loose. These trees are going in a 3D printed pot and the file
is available on Thingiverse for free. You can download it and print it out and you can scale
it up or down make any size pot you want. This is printed with PLA plastic and you can see over the
years it's kind of warped a bit. That's the one disadvantage of printing with PLA plastic is it's
not very stable and after you know a certain number of years the plastic starts breaking down
so I'll be taking it out of this 3D printed pot today and putting it into a ceramic pot.
So it's in there pretty good. This PLA pot is still hanging together but I'm sure it won't
last too much longer. It's been in this pot for four years and I'm sure the pot will be
starting to disintegrate soon. It's really locked in here. There it goes. Okay so the pot looks like
it's in fairly good shape still. It could be used as a training pot and there's the trees.
I can see some of the roots are just starting to become active. You can see the white tips on them
but generally they're all dormant still the roots. So it is a good time to repot these trees.
I'll peel all the moss off the surface. Oh and I see I already see my crane fly larva. There's one
here. There's one here. There's a close-up of these larva. They're quite dormant because it's
cool in the greenhouse here. But yeah so these things they mostly eat the moss but they will
eat roots if they're hungry. I'll begin combing out the roots and the soil and we'll see what has
grown. What the root system looks like. So these trees they should have been repotted probably
every two years when they're young. Four years is a little long to go. There's another crane fly
larva. Yeah I'm sure they're quite root bound in this pot. I can tell the soil isn't very crumbly.
It's packed with roots which can be a good thing. We'll see. We'll see if the roots are
really out of balance. The last time I repotted I you know removed a lot of the taproot but I kept
some of it. It's always wise to cut your taproot in half at first the first repotting and then
let those lateral roots grow the radial roots and then you can clean up the bottom of the tree
once it has a good root system established and just you know improve the root system over the
years working away at them always striving to get a beautiful radial root base and you'll notice
I'm combing in a radial direction so I don't tear any radial roots I'm only tearing crossing roots
and that keeps all those nice roots you want to keep intact and all the matted crossing roots
get combed out and cleaned out so you're left with a pretty good looking root system.
You can also see in here that the perlite is broken down quite a bit that it acts a lot like
akadama that the roots grow into the perlite particles and they break them up into smaller
and smaller particles as the tree matures in the soil and you get a finer and finer soil as
as you leave the tree to grow which is good it especially if you're starting to refine the trees
it helps miniaturize them by keeping those soil smart particles small
and your fine root system grows in them. Perlite I think is an inexpensive
substitute for akadama I can't afford to use akadama it's too expensive here
the number of trees I have I just I couldn't afford it I would go broke
and you know maybe sometime in the future with some of my more refined trees I'll try akadama out
but but so far you know the soil I use seems to work really well so it's inexpensive so I keep
using it. Wow there's some thick roots down here I'll feed the crane fly larvae to the chickens
now so I don't forget about them I'll just wet down my roots to make sure they're staying hydrated
they are in the sun here now and I'll continue combing them out a very difficult task
these trees were left far too long between re-bodying. Now I got two of these drainage
screens out but there's still two more tangled in the roots in here that one root wow is that
thick it's thicker than the trunk yeah there's just roots have grown through the drainage screens
it's coming yeah not an easy re-potting this one that's what happens if you leave them too long
re-potting becomes very difficult oh there's one more out here's another part of one
okay I think there's just the one drainage screen in here one of these coarse ones
there it comes there I got it out wow that was really really tangled in there
the two trees are still quite firmly attached to each other the roots are kind of intertwined
so I will have to separate the two trees I'm going to try and separate the two trees now they're
kind of loose with each other but there's a lot of roots that are intertwined
but if I can get them separated I think I'll have a better chance of
finding the roots identifying which ones need pruning and which ones don't it's coming
it's just a bit of tangulation in here that's a word yeah they're definitely loose with each other
yeah they're loose there we go I think it's coming now I'm thinking that thick root is off
the small tree I am thinking it is holy so there they are they're separated now and that big thick
root is off this skinny little tree oh my goodness let me clean up yeah so here's a look at my root
system so the small tree has that big thick root wow but there's lots of fine roots too
and the larger tree has a better root system it's a little more balanced there's no big thick
roots on it so the first step I think is to get rid of that great big giant root off of the small
tree and I'll need to find out where it comes from which is right in here so a root like this
I have two choices I could remove it totally and I think there's enough fine roots to support the
tree or I could leave part of it and then you know with the next repotting prune it back but
I think in this case because there's so many fine roots here I can take it totally off so I'll do
that so here I go I'm going to come in and just prune it off big big root cut coming up here I go
done so there there is that root wow I still can't believe that that's just amazing you know for this
size of a tree to have a root like that that's just incredible so that can go in the compost pile
and I can continue to comb out the roots that are left and see what I have
okay and then I'll work on the big tree
so there is one you know fairly thick root on the larger tree but
it's not too bad I mean I'll prune it away but
definitely has a better balanced root system the larger tree
okay so once again I'm going to clean up I don't like working and you know on roots
and a messy pile of soil and I would like to wash these roots
so I think I'll have to do that outside with the watering can so I'll do that I'll wash the roots
with the watering can you know get as much soil away from them as I can clean up and then
do some more combing and then start root pruning all right I'm going to start the root pruning now
I've cleaned up the trees kind of washed the roots off of the watering can it's not
they're not very clean but it's enough that I can start the root pruning so here's a root that grows
out in a nice radial direction and then it takes a corner so I'll prune it off shorter like that
there's a root on the bottom it's down too low I'm going to prune that off short
there's also another root here that's grown out hit the edge of the pot
it needs to be pruned off shorter you can see it starts from in here
it's looking good until about here so I'll prune that part of it off
like that there's another large root here that's quite a nice root actually the only problem is is
it's a beautiful root but it's a little thick you can also see where it's hit the edge of
the pot and then followed the pot around in the rectangular shape so I'm just going to prune this
one back to here a fairly big cut but there's part of the root is still left so that's starting to
get it cleaned up there's a root here that goes a funny direction I'll prune it off short like that
and then I need to do a bit more combing to move the soil here and see what's going on
okay so there's my root system on the small tree
so I have like there's some buds up here I'm going to remove I don't want
like a multi-trunk tree and there's some lumps here of I think they're branches I removed
there were suckers coming up from the base of the tree I'm going to clean those up
so I'm going to come in here and just prune off all these nubs in an effort to get you know
fairly smooth looking trunk it'll have a lot of scars that'll heal over in the future but
at least it'll be kind of smooth and flowing it won't be
have all these protrusions sticking out of it which wouldn't look so good
okay so now on the root base you can see you know the trunk thickens up right to the base down here
where that big thick root was so I think some of these upper roots can get pruned away
they're a little high some of them I think even this one's too high
this one here some fine roots there these ones I think are too high also
so I'm going to have to prune those away trying to establish you know a radial root plane down here
and also trying to keep enough roots to keep the tree alive and healthy there's one here that's
growing in a funny direction I think that one might be okay
I'm gonna get rid of it and then I'll just trim some of these longer ones back
and I think you know that's pretty good that's a good looking root base on the tree now
so I'll set that one aside and I'll start on the large tree so the large tree has
a pretty good looking root base at least from what I see so far
there's a lot of good roots a lot of nice trunk flare I would definitely say you know my radial
root base can be developed from these surface roots here and whatever is growing down here
will require some pruning so I'm going to start you can see there's one thick root here
that's growing from the bottom of the tree I'm going to remove that
that'll be my first step and I'm just going to cut it off now for now and then I may
be able to clean that cut up later on so that gets rid of that thick root
there's a few roots under here this one's crossing
the bottom of the tree get rid of that there's one coming straight down here I can remove
and then that one I cut off I think I can cut it back shorter once I clean it out and see where
where that root comes from so right in here you can see it now so that can get pruned off
much shorter to here so here I go that gets rid of that that stub of that big root
and then there's another few roots in here growing straight down that I can remove
they're not so big getting that root base flat on the bottom that's pretty good okay
I'll do a little cleanup and then we'll come back pruning the surface roots all right you can see
the root base is sitting quite flat now on the bottom and you want the top tapering into the
soil flowing into the soil okay so now it's time to prune these roots so my first one here
is too long I'm going to prune it back to here this one's a bit too long I'll put it back to here
and that one back these ones getting rid of these long ends on the roots
there's a few root hairs sticking up here I can get rid of there's a root here you can see it
comes 90 degrees to the trunk it doesn't flow down into the soil so I'll remove that one
this one also doesn't really flow down into the soil so I'm going to remove it these ones aren't
bad there's one sticking up here though that I gotta get rid of a few root hairs here sticking
up kind of crossing roots there that were wrapping around the trunk you don't want
those thickening up the strangler roots they don't really strangle the tree too much
but they will thicken up and look ugly as they wrap around the trunk
so the rest of it's looking pretty good a few roots on the bottom I could trim back
and I think that's pretty good I think that's a good looking root base
not bad for the second root pruning of this tree so yeah so that's ready to plant both trees
have kind of been reduced to a radial root base okay so next I have to pick a pot and I
have two options I can pot them as individual trees or I can plant them together again
I'll see what pot I have I went looking for pots outside and I found this mica pot here
it's not too deep it's quite large for these two trees but I think it'll give the roots
lots of room to grow it's a pretty good size I think to develop these trees to the next level
so that's the pot I'll use so I'll get the pot cleaned up it's a bit dirty at the moment
and then we'll come back and plant the trees I've got my drainage screens in the pot the
pot's cleaned up I scrubbed it but it's still a little it's got some patina let's say so I'll
add a base layer of soil to the bottom of the pot it'll take quite a bit of soil in here
okay I think that's a good level to plant the trees so I'll start I'm going to plant both trees
in this pot and I think I'll put the large tree here maybe let me pick the front of it
I think somewhere here was the front so maybe the large tree over here so this branch gets light
and the smaller tree maybe the opposite direction and kind of set it back just a little bit
more like that so I'll just check my roots are combed out before I start adding soil in
make sure there's no tangled roots they're kind of flowing outwards
I think that's good okay I'll begin adding soil make sure my trees are vertical
somewhere about there let's just step back and have a look at it
there's a look at the two trees in the pot they've got lots of room to grow so I think
that'll be quite good so I'll keep filling it up with soil and then I'll check the height of the
trees make sure they're looking good it's a good thing I mixed up lots of soil because this pot
uses a lot I'm just checking the height of the trees in the pot I think it's pretty good you
just start to see the flare at the base of the trees the roots are safely in the soil
so I'll continue filling it in topping the soil up and then I'll just work that soil onto the
roots make sure there's no air pockets usually with these flat radial root bases they're
not a lot of air pockets in them because they're they lay flat on the soil
but it's a good idea to work it in the best you can
you can always tell by how much the tree wiggles if it wiggles there's air pockets
if it feels firm you know you've got soil surrounding all the roots
and when the soil is nice and dry like this it flows around the roots quite
well yeah they feel good in the pot they're nice and nice and firm okay so that
needs watering so let's get out the watering can and give the trees of water all right here I go
with the water you can hear that soil sucking up the water absorbing it nothing coming out
the drainage holes yet I think soon there it comes it looks nice and clear which shows there's
not much dust in the soil it's quite good and again I'll water this several times today making
sure that soil's soaking up all the water I'll rotate the trees around so you can see them from
all angles so here is the current front of them coming around to the right hand side
to the back the left hand side and back to the front it is a beautiful day here in the bonsai
zone I will be placing stones on the surface of the soil of the royal oaks but my stone collection
here is buried under the snow it is supposed to warm up in the next few days and I'll have
access to them and I'll do that I'll place stones on the surface of the soil just to hold them in
place until the roots get established in the pot I think these two oak trees have a good chance of
success after this repotting it was the right time of the year the buds were swelling and the leaves
were just starting to emerge they had a fairly good root system left on them after the root pruning
so hopefully all will go well you never know all you can do is you know trust the process and the
timing and whatever happens happens it's time for today's updates and I'll show you the trident
maple I repotted that quite recently and you can see on the top of it there's all kinds of leaves
coming out very exciting the korean maple the buds are swelling it should be leafing out soon
and the hawthorn after it's repotting it's hanging in there looking good so far anyway
I really enjoyed the process of growing miniature trees from seeds and these two royal oaks I hope
will be an example for the future where you'll see them slowly transform from seedlings into
more mature looking trees eventually my two oldest royal oaks that I started from seeds
are repotted and I was quite happy with the root base on both of them after the root pruning it was
a bit of a surprise that one really thick root on the smallest tree and it wasn't a really easy
repotting because I had left it too long four years I should have repotted it every two years
but I think they're back on track ready to grow for spring and I think they've taken a big step
forward today getting those roots sorted out once again and I think they'll they'll have a good
season this year so that is all for today I'm Nigel Saunders thanks for joining me in the Bonsai Zone
