Polymer Clay Cherry Blossom | Sakura Earrings Tutorial | How To Make Polymer Clay Earrings

DIY Cute Things
114 followers
Hello, welcome to my channel. My name is Junani. Today I'm going to show you guys how I made these
cherry blossom earrings. I'll be using Primo and Souffle for this project.
This gorgeous purple will be my background color and these two for the flowers. This is for the
stem and this is for the pestle. These flowers are very easy to make and you can adopt this technique
to make many different styles. By using a little bit of pink clay, I created a really small
teardrop. I kept the top of this teardrop fairly flat and I sectioned it into five equal parts.
Then I extended this cut a little bit towards the bottom.
Then I used the dotting tool in rolling motion to push out the clay from the middle.
Then I kept working on it so the petals will be defined.
And I created a small hole in the middle. Using the needle tool, I created a little indent
in the middle of each petal. I also added some scorings on the petals.
Then I cut the extra clay as closer to the flower as I could. Then I continued to make
these flowers from both white and pink. And I believe this technique is used to make fondant
flowers but I think many techniques that they use on fondant will work just fine on polymer clay as
well. After I had a handful of flowers, I rolled my background clay on the pasta machine on the
thickest setting. I'll be using my extruder to create branches. The first batch I extruded
was a little too thick so I tried it again using a different dye. It was still a little bit thicker
but I worked it a little bit by hand and began placing it on the background clay.
placing my flowers. I made sure to push my flower in slightly so it won't fall off.
And at one point, I did run out of flowers and I made them as I went and it took forever.
I think it took me about three to four hours just to make these flowers.
But at the end, it's all so worth it. So yeah.
Finally, the whole sheet is covered in flowers. Next step is to start shading the flowers.
I use soft pastels. I use a color red and white and then mix it together
to create a nice gorgeous pink shade.
Using a fine brush, I applied the shading to the middle of the flowers.
And after all the shading is done, I'm going to be using some liquid clay
to attach the pistil in the middle of the flowers. If I were to put more clay in the
middle of the flower, it will have a hard time adhering because we use pastels.
I created small balls of yellow clay and added to the middle of the flower.
Make sure you check the description box. I have all the tools and supplies listed down.
After the slab is finished, I use some rubbing alcohol and a cotton bud to clean up any lint.
Next, I cut the shapes using my cookie cutters. I learned a really good lesson here because it
was so sad cutting these pieces. So next time, I would probably cut the shapes first and then
add the flowers and branches. But I still do think they turned out really cute and unique.
And I also cut some pieces of solid colored clay. I felt like some of the spaces were empty,
so I pulled some flowers off of the scrap clay and added to these empty spaces.
Now it was time to bake my pieces. You can follow the instructions on the packaging.
I have a really old oven, so I bake my pieces for one hour in 225 Fahrenheit. And if you have
trouble baking your pieces, I recommend you bake some samples and figure out your ideal
temperature and time. To sand my pieces, I'm going to be using the wet sanding method.
If you want to see me sanding in detail, I recommend you check out my last video.
This sander is actually a nail sander, but it works really well for these delicate polymer clay
pieces. And I use this attachment to drill the holes for the jump rings.
I'm going to be using my favorite Sculpey gloss glaze to finish these pieces.
I used a soft paintbrush and my needle tool to guide and help me keep the pieces in place.
Make sure you get in all those nooks and crannies. Next, I assembled my pieces using jump rings.
And I also used this Loctite super glue to attach my earring posts.
That is the end of this tutorial. I hope you guys liked it.
I certainly enjoyed making these. Make sure you subscribe,
like, and follow me on Instagram at FernMitchHandmade. I'll see you guys next week!
